• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.629-633
• /
• 1998

본 연구에서는 연성손실계수가 구조물의 진동에 미치는 영향을 살펴보았다. 세부시스템의 두께가 동일할 경우 평판으로 이루어진 구조물이 접수되면 연성손실계수가 감소하게 된다. 특히, 저주파수 대역에서 연성손실계수가 크게 낮아졌다. 그 주된 원인은 접수로 인해 평판에서 전파되는 굽힘파의 그룹속도가 줄어들기 때문이며, 접수로 인한 파워투과계수의 변화는 크지 않았다. 내부에 격벽을 가진 steel box에 공기중 연성손실계수와 접수시 연성손실계수를 적용하여 세부시스템의 속도를 구한 결과, 공기중 연성손실계수를 이용하여 구한 속도가 접수시 연성손실계수를 이용하여 구한 속도보다 약 2-3 dB정도 높게 나타났다. 선박과 같은 복잡한 구조물인 경우 연성손실계수에 의한 속도 차이는 더욱 커질 것으로 추정된다. 따라서, SEA를 이용한 접수 구조물의 진동해석에서 해석오차를 줄이기 위해서는 연성손실계수에 접수의 영향을 고려해 주어야 함을 확인하였다. 특히, 접수효과가 고려된 연성손실계수를 사용하면 SEA가 큰 오차를 보이는 중, 저주파수 대역에서 해석 결과에 대한 신뢰성을 높일 것으로 판단된다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.905-915
• /
• 2011

The free flexural vibration of a hanged clamped-free cylindrical shell partially submerged in water with gap from bottom is investigated. The fluid is assumed to be inviscid and irrotational. The cylindrical shell is modeled by using the Rayleigh-Ritz method based on the Sanders shell theory. The kinetic energy of the fluid is derived by solving the boundary-value problem related to the fluid motion. The natural vibration characteristics of the partially submerged cylindrical shell are discussed with respect to the added virtual mass approach. In this study, experiments were carried out to confirm theoretical results. It was found that theoretical prediction is in good agreement with experimental results.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.155-158
• /
• 2008

As the span of spatial structure is getting longer, the law frequency of the structure makes the wind-induced response much increased. However, there are lots of hardships to establish the economical structural systems due to the fact that an relative equation between the frequency and the span of the domestic spatial structures is not existed in the stage of the basic planning design. Therefore, among the large-span structures, this paper focused on the relationship between the frequency and the span of the world-cup stadium built in 2000s. The relative equation between the frequency and span is compared with the data measured in Japan. Moreover, we are willing to provide the basic study by suggesting the summary equation in this paper.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.3 s.21
• /
• pp.59-67
• /
• 2006

A conventional passive TMD is only effective when it is tuned properly. In many practical applications, inevitable off-tuning of a TMD occurs because the mass in a building floor could change by moving furnishings, people gathering, etc. when TMDs are offtuned, TMDs their effectiveness is sharply reduced. Moreover, the off-tuned nTMDs can excessively amplify the vibration levels of the primary structures. This paper discusses the application of a new class of MR damper, for the reduction of floor vibrations due to machine and human movements. The STMD introduced uses a MR damper called to semi-active damper to achieve reduction in the floor vibration. Here, the STMD and the groundhook algorithm are applied to a single degree of freedom system representative of building floors. The performance or the STMD is compared to that or the equivalent passive TMD. In addition, the effects of off-tuning due to variations in the mass of the floor system. Comparison of the results demonstrates the efficiency and robustness or STMD with respect to equivalent TMD.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.65-74
• /
• 2010

In this study, the vibration control effect according to the installation location of the sky-bridge and the difference of natural periods of the connected buildings has been investigated. To this end, 40-story and 50-story building structures connected by a sky-bridge were used as example structures and the equivalent modeling method was used. Boundary nonlinear time history analyses were performed using El Centro and Taft earthquakes to investigate the dynamic behavior of the example structures and vibration control effect of the sky-bridge. Based on numerical results, it has been shown that displacement responses can be effectively controlled as the installation floor of the sky-bridge increases and acceleration responses can be effectively reduced when the sky-bridge is installed on the mid-stories of the example building.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.116-122
• /
• 1995

본 논문에서는 컴프레서 쉘의 구조해석을 수행하기 위하여, 범용 구조 해석 패키지인 MSC/NASTRAN을 이용하여 컴프레서 쉘 전체의 동특성 해석을 수행하였으며, MSC/NASTRAN의 Superelement 모듈인 부분구조합성법을 이용하여 구조물 전체의 동특성해석을 수행하였다. 그리고, 각 분계의 변형 및 운동 에너지를 산출하여 전체 구조물의 고유모드에 대한 분계의 기여도를 평가하였으며, 각각의 에너지에 기여가 높은 분계의 형상을 변경하여 구조물 전체가 원하는 동특성을 얻도록 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.86-92
• /
• 2017

The possibility to development of floor vibration problem is larger in case of long span structure under service loads. Therefore, to improve the vibration performance of the floor, increasing of its thickness is a common method. But, increasing of thickness can lead to increase of slab self weight and reduce the effectiveness of the building. For this reason, attention for voided slab which reduces the self-weight is increasing. Hence, voided deck slab combined with deck plate and polystyrene void foam which has buoyancy prevention capacity and much developed construct ability has bee developed. By using the developed voided slab, vibration performance of a mock-up building structure has been investigated in the current study. The results according to analysis showed that they can be implemented in living and bedroom which are considered as 1st grade on the basis of "Residential Evaluation Guidelines for Vibration of Buildings" by the Architectural Institute of Japan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.35-42
• /
• 1990

A method for the damage assessment of a structure by an inverse modal perturbation technique is studied. The first few natural frequencies and mode shapes of the damaged structure are assumed to be known. Then, the perturbation equation is formulated for the changes of the modal properties due to the stiffness changes. The stiffness changes due to damages are evaluated, using optimization techniques. Example analyses are carried out for several cases of stick models and a truss model. Results indicate that the present method yields very reasonable estimates for the element stiffness changes.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.69-78
• /
• 2009

Since the blast vibration induced by explosives of the powder possibly provide damage of the nearby structures adjacent to the tunnel, the stability of the nearby structures should be estimated. In this study, the stability of the tunnel based on the allowable peak particle velocity of the structures as well as allowable stress of the structures presented in the concrete structural design standard was estimated with respect to the stress of the concrete lining and axial force of the rockbolt during the blasting operation at the ground surface of the pre-existing tunnel. The analyses were carried out by using $FLAC^{2D}$ which is one of the programs developed based on the finite difference method. The bending compressive stress and shear stress of the concrete lining and axial force of the rockbolt were rapidly increased when the blasting operation was conducted near the tunnel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.983-989
• /
• 2013

This study proposes a piezoelectric vibration energy harvester composed of two diagonally segmented energy harvesting units. An auxiliary structural unit is attached to the tip of a host structural unit cantilevered to a vibrating base, where the two components have beam axes in opposite directions from each other and matched short-circuit resonant frequencies. Contrary to the usual observations in two resonant frequency-matched structures, the proposed structure shows little eigenfrequency separation and yields a mode sequence change between the first two modes. These lead to maximum power generation around a specific frequency. By using commercial finite element software, it is shown that the magnitude of the output power from the proposed vibration energy harvester can be substantially improved in comparison with those from conventional cantilevered energy harvesters with the same footprint area and magnitude of a tip mass.