• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.25-46
• /
• 1998

This paper shows that there are the results of a series of model tests on the behavior of single pipe pile which is subjected to lateral load in, Nak-dong River sand. The purpose of the present paper is to estimate the effect of Non-homogeneity. constraint condition of pile head, lateral load velocity, relative density, and embedded length of pile on the behavior of single pile. These effects can be quantified only by the results of model tests. Also, these are compared with the results of the numerical methods (p-y method, modified Vlasov method; new ${\gamma}$ parameter, Characteristic Load Method'CLM). In this study, a new ${\gamma}$ parameter equation based on the Vlasov method was developed to calculate the modulus of subgrade reaction (E. : nhz.) proportional to the depth. The p-y method of analysis is characterized by nonlinear behavior. and is an effective method of designing deep foundations subjected to lateral loads. The new method, which is called the characteristic load method (CLM). is simpler than p-y analysis. but its results closely approximates p-y analysis results. The method uses dimensional analysis to characterize the nonlinear behavior of laterally loaded piles with respect to be relationships among dimensionless variables. The modulus of subgrade reaction used in p-y analysis and modified Vlasov method obtained from back analysis using direct shear test (DST) results. The coefficients obtained from DST and the modified ones used for the prediction of lateral behavior of ultimate soil reaction range from 0.014 to 0.05. and from 0.2 to 0.4 respectively. It is shown that the predicted numerical results by the new method (CLM), p-y analysis, and modified Vlasov method (new parameter) agree well with measured results as the relative density increases. Also, the characteristic load method established applicability on the Q-Mnu. relationship below y/D=0.2.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.375-402
• /
• 2020

The adoption and entering into force of the Registration Convention was another achievement in expanding and strengthening the corpus iuris spatialis. It was the fourth treaty negotiated by the member states of the UNCOPUOS and it elaborates further Articles 5 and 8 of the Outer Space Treaty(OST). The Registration Convention also complements and strengthens the Article 11 of the OST, which stipulates an obligation of state parties to inform the UN Secretary-General of the nature, conduct, locations, and results of their space activities in order to promote international cooperation. The prevailing purposes of the Registration Convention is the clarification of "jurisdiction and control" as a comprehensive concept mentioned in Article 5 8 of the OST. In addition to its overriding objective, the Registration Convention also contributes to the promotion and the exploration and use of outer space for peaceful purposes. Establishing and maintaining a public register reduces the possibility of the existence of unidentified space objects and thereby lowers the risk such as, for example, putting the weapons of mass destruction secretly into orbit. And furthermore it could serve for a better space traffic management. The Registration Convention is a treaty established to implement Article 5 of OST for the rescue and return of astronaut in more detail. In this respect, if OST is a general law, the Registration Convention would be said to be in a special law. If two laws conflict the principle of lex specialis will be applied. Countries that have not joined the Registration Convention will have to follow the rules concerning the registration of paragraph 7 of the Declaration by the United Nations General Assembly resolution 1721 (X V I) in 1961. UN Resolution 1721 (XVI) is essentially non-binding, but appears to have evolved into the norm of customary international law requiring all States launching space objects into orbit or beyond to promptly provide information about their launchings for registration to the United Nations. However, the nature and scope of the information to be supplied is left to the discretion of the notifying State. The Registration Convention is a treaty created for compulsory registration of space objects by nations, but in reality it is a treaty that does not deviate from existing practice because it is based on voluntary registration. With the situation of dealing with new problems due to the commercialization and privatization of the space market, issues related to the definition of a 'space object', including matter of the registry state of new state that purchased space objects and space debris matter caused by the suspension of space objects launched by the registry state should be considered as matters when amendments, additional protocols or new Registration Convention are established. Also the question of registration of a flight vehicle in the commercial space market using a space vehicle traveling in a sub-orbital in a short time should be considered.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.3-12
• /
• 1994

$\^$137/Cs gamma ray induced thermoluminescenc(TL) from Na$\^$+/ ion implanted Al$_2$O$_3$ and unimplanted Al$_2$O$_3$ and the TL from Na$\^$+/ ion implanted Al$_2$O$_3$ are measured over the temperature range of 340K～620K. The TL curve of Na$\^$+/ ion implanted Al$_2$O$_3$ induced by $\^$137/Cs gamma ray is split into iolated TL peak located at 415K, 452K, 508K, and 568K. Because that the concentration of trapped char he carries of $\^$137/Cs gamma ray induced Al$_2$O$_3$ implanted with Na$\^$+/ ion is larger than that of Na$\^$+/ ion only implanted Al$_2$O$_3$, and the trap concentration of Na$\^$+/ ion implanted Al$_2$O$_3$ is much than that of $\^$137/Cs gamma ray only irradiated Al$_2$O$_3$, the TL intensity of Na$\^$+/ ion implanted Al$_2$O$_3$ induced by $\^$137/Cs gamma ray is about 20 times and 5 times higher than that of Al$_2$O$_3$ only implanted with Na$\^$+/ ion and Al$_2$O$_3$ only irradiated with $\^$137/Cs gamma ray, respectively. In proportion as ion implantation does and energy are incresed, the number of generated defects and the rate of defect creation are incresed, respectively. Therefore the TL intensity of ion implanted Al$_2$O$_3$ is depend on ion dose and energy. Acccrding to increse of incident ion mass, the TL intensity of ion implanted Al$_2$O$_3$ is abruptly decresce. This result showes that the TL intensity of ion implanted Al$_2$O$_3$ is closely related to ion depth range as wll as rate of defect creatin. The TL intensity of ion implanted Al$_2$O$_3$ is found to be related with defects generated by ion implantation. Table Caption

• Investigative Magnetic Resonance Imaging
• /
• v.5 no.1
• /
• pp.33-37
• /
• 2001

Purpose : The water exchange rate between bulk water and bound water is an important parameter in deciding the efficiency of paramagnetic contrast agents. In this study, we evaluated the water exchange rates of various Gd-chelates using oxygen-17 NMR technique. Material and Methods : The samples (Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA, Gd-EOB-DTPA) were prepared by mixing 5% $^{17}O-enriched$ water (Isotech, USA). The pH of the samples was adjusted to physiological value [pH=7.0] by buffer solution. The variable temperature $^{17}O-NMR$ measurements were performed using Bruker-600 (14.1 T, 81.3 MHz) spectrometer. Bruker VT-1000 temperature control units were used to stabilize the temperature. The $^{17}O$ spin-spin relaxation times (T2) were measured using Carr-Purcell-Meiboom-Gill (CPMG)I pulse sequence with 24 echo trains. The variable temperature T2 relaxation data were then fitted into Solomon-Bloembergen equations using least square fit algorithm to estimate the water exchange times. Results : From the measured $^{17}O-NMR$ relaxation rates, the determined water exchange rates at 300K are $0.42{\;}{\mu}s$ for Gd-DTPA, $1.99{\;}{\mu}s$ for Gd-DTPA-BMA, $0.27{\;}{\mu}s$ for Gd-DOTA, and $0.11{\;}{\mu}s$ for Gd-EOB-DTPA. The Gd-DTPA-BMA showed slowest exchange whereas Gd-EOB-DTPA had fastest water exchange rate. In addition, it was found that the water exchange rates (${\tau}_m$) of all samples had exponential temperature dependence with different decay constant. Conclusion : $^{17}O-NMR$ relaxation rate measurements, when combined with variable temperature technique, provide a solid tool for studying water exchange rate, which is very important in investigating the detailed mechanism of relaxation enhancement effect of the paramagnetic contrast agents.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.44-52
• /
• 2007

Integrated Coastal Management(ICM) has been recommended by international organizations and experts as a desirable way of dealing with the current problems of ocean pollution and ocean conservation and dealing with the conflicts among the various users of coastal and ocean resources. As a response, the Korean government legislated Coastal Management Act in 1999. following the Act, local governments were required to make a local integrated coastal management plan(LICMP). Though the LICMPs are made, it is not easy to put LICMP in effect, because the mandates of the Coastal Management Act are not clear and there are conflicts regarding the jurisdiction of the coastal areas among relevant departments of the government and because it is not easy to monitor and supervise the activities along the vast areas of coasts and oceans. The traditional method of Implementing the LICMP was not simply feasible. Community-based approach to the ICM was proposed as an alternative to the traditional method. This study aims to examine and introduce the community-based network of organizations as an alternative form of organization best suited to the integrated coastal management. This study is composed of four major parts. First, it examines the advantages of the network as a form of organization vis-vis the market and the hierarchy. Second, it reviews three well-known cases of integrated coastal management programs - Xiamen ICM program in China, Coastcare in Australia and Atlantic Coastal Action Program in Canada. Third, on the basis of the case study, it proposes principles and guidelines which we need to consider when we introduce the community-based approach to the ICM in Korea. Fourth, this study also reports on the actual networking processes in Yeosu City(the Yeosu Network for the effective implementation of integrated coastal management plan). The networking in Yeosu will serve as a demonstration of networking various stake-holders concerned with the balance between the development and conservation of finite ocean resources.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.3
• /
• pp.316-326
• /
• 1999

Purpose: We evaluated the feasibility of extracting pure left ventricular blood pool and myocardial time-activity curves (TACs) and of generating factor images from human dynamic N-13 ammonia PET using factor analysis. The myocardial blood flow (MBF) estimates obtained with factor analysis were compared with those obtained with the user drawn region-of-interest (ROI) method. Materials and Methods: Stress and rest N-13 ammonia cardiac PET imaging was acquired for 23 min in 5 patients with coronary artery disease using GE Advance tomograph. Factor analysis generated physiological TACs and factor images using the normalized TACs from each dixel. Four steps were involved in this algorithm: (a) data preprocessing; (b) principal component analysis; (c) oblique rotation with positivity constraints; (d) factor image computation. Area under curves and MBF estimated using the two compartment N-13 ammonia model were used to validate the accuracy of the factor analysis generated physiological TACs. The MBF estimated by factor analysis was compared to the values estimated by using the ROI method. Results: MBF values obtained by factor analysis were linearly correlated with MBF obtained by the ROI method (slope = 0.84, r = 0.91), Left ventricular blood pool TACs obtained by the two methods agreed well (Area under curve ratio: 1.02 ($0{\sim}1min$), 0.98 ($0{\sim}2min$), 0.86 ($1{\sim}2min$)). Conclusion: The results of this study demonstrates that MBF can be measured accurately and noninvasively with dynamic N-13 ammonia PET imaging and factor analysis. This method is simple and accurate, and can measure MBF without blood sampling, ROI definition or spillover correction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.659-667
• /
• 2004

Plantain has been used for antidiarrhea, antihemorrhage and the remedy of indigestion. Plantain was extracted with ethanol and fractionated systemically with n-hexane, chloroform, ethylacetate (EtOAC) and n-butanol. Antioxidant index (AI was expressed as induction period of oil containing various fractions/induction period of oil of 600 ppm) of EtOAC fraction was the highest among fractions in vitro. The protective effects of the EtOAC fraction of plantain (PE) administered 1 mL orally or intraduodenally on experimentally induced gastritis, gastric ulcer and gastric secretion were evaluated in rats. Sprague-Dawley rats weighing 250∼300 g were divided into 4 groups; negative control group (CON), PE 200 mg/kg treated group (PEL), PE 400 mg/kg treated group (PEH) and positive control group (cimetidine 100 mg/kg-CMT or omeprazol 100 mg/kg treated group-OMT), respectively, PE significantly suppressed HCl-ethanol induced gastric lesions and indomethacin-induced gastric ulcers (administered subcutaneouly) in rats. Specially PE 400 mg/kg showed significantly inhibitory effect, which was more potent than that of 100 mg/kg of commercial drug, cimetidine, and elevated an inhibitory effect to be close to the level in inhibitory ratio of omeprazol administered group in Shay's ucler. On gastric secretion in pylorus ligated rat, PE 200 mg/kg and 400 mg/kg decreased the gastric volume and acid output, but did not show an apparent effect on pepsin activity. In addition, PE 400 mg/kg depressed gastric ulcers induced by water immersion stress and duodenal ulcers induced by cysteamine administered subcutaneouly. These results suggest that the ethylacetate fraction of plantain can be used in prevention and treatment of experimentally induced gastric mucosal damage and ulcers.

• Journal of Environmental Policy
• /
• v.6 no.1
• /
• pp.41-60
• /
• 2007

Attempts were made to define the elements of debates, impact of decisions of the Access to Genetic Resources and Benefit-sharing(ABS) of the Conference of the Parties(COP) to the Convention on Biological Diversity(CBD) In Korea. Providing policy suggestions to cope with ABS, a cross-cutting issue of the meetings of the COP, was also undertaken. Meetings concerning ABS deal with several key matters such as an international regime, which is a legally binding implementation tool of the Bonn Guidelines, an international certificate of genetic resources' origin/source/legal provenance, and disclosure of origin of genetic resources, compliance measures with prior informed consent of the Contracting Parties providing such resources and with mutually agreed terms on which access was granted. Developing countries, rich in biodiversity and genetic resources, use the CBD as a major tool to maximize their national profits. They demand for national sovereign rights for the genetic resources and indigenous communities providing associated traditional knowledge. At the meetings of the COP, in addition, they requested that developed countries should transfer technologies and provide a financial mechanism for resource conservation to them. On the contrary, the developed countries argue that facilitating access to genetic resources is essential for scientific research and development, and that both Intellectual Property Rights and biotechnology using genetic resources should be protected to maximize their national benefits. Decisions of the COP concerning the Bonn Guidelines and compliance measures with ABS will affect on various socioeconomic fields of Korea, a country which is short of genetic resources. Especially, the importation of genetic resources and land development which might damage genetic resources will be limited seriously. Consequently, overall expenses will increase for the securing genetic resources from the foreign countries and developing biotechnology for conservation and sustainable uses of genetic resources. To minimize the adverse impacts, we endeavor to establish our clear standpoint and to lead the international trends, which are favorable for us. In order to achieve these objectives, government needs i) to proceed researches to lead the international ABS debates actively and to prepare the expected decisions of the future meetings of the COP, ii) to establish a national implementation plan to cope with the ABS and its related decisions, iii) to examine and improve the efficiencies of the national implementation plan with a proper monitoring system, and iv) cope with the other international meetings including the meetings of Trade Related Intellectual Properly Rights and International Treaty on Plant Genetic Resources for Food and Agriculture actively.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• International Journal of Highway Engineering
• /
• v.1 no.1
• /
• pp.107-119
• /
• 1999

The joints in the jointed concrete pavement provide a control against transverse or longitudinal cracking at slab, which may be caused by temperature or moisture variation during or after hydration. Without control of cracking, random cracks cause more serious distresses and result in structural or functional failure of pavement system. However, joints nay cause distresses due to its inherent weakness in structural integrity. Thus, the evaluation at joint is very important. and the joint-related distresses should be evaluated reasonably for economic rehabilitation. The purpose of this paper was to develop an evaluation system at joints of jointed concrete pavement using finite element analysis program, ILLI-SLAB, and nondestructive testing device. FWD. To develop an evaluation system for JCP, a sensitivity analysis was performed using ILLI-SLAB program with a selected variables which might affect fairly to on the performance of transverse joints. The most significant variables were selected from precise analysis. An evaluation charts were made for jointed concrete pavement by adopting the field FWD data. It was concluded that the variables which most significantly affect to pavement deflections are the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G), and limiting criteria on the performance of joints at JCP are 300pci. 500,000 lb/in. respectively. Using these variables and FWD test, a charts of load transfer ratio versus surface deflection at joints were made in order to evaluate the performance of JCP. Practically, Chungbu highway was evaluated by these evaluation charts and FWD field data for jointed concrete pavement. For Chungbu highway, only one joint showed smaller value than limiting criterion of the modulus of dowel/concrete interaction(G). The rest joints showed larger values than limiting criteria of the modulus of subgrade reaction(K) and the modulus of dowel/concrete interaction(G).