• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.284-295
• /
• 1999

The purpose of this study was to measure and analyze the bond strength of bonded amalgam using dental adhesives and to compare this with light-curing composite resin. Sections 8mm in diameter were punched out from the labial surface of bovine anterior teeth. These were embedded in clear acrylic resin blocks with labial surface facing out. 55 specimens were made for enamel and dentin each. After dividing these into 5 groups, group 1: Superbond C&B, group 2: Panavia 21, group 3: All-Bond 2, group 4: Fuji I Glass Ionomer Luting Cement, group 5: Scotchbond Multi-Purpose(Restorative Z-100), molds with holes of 6.3mm in diameter and 1.5mm in depth were placed over the specimens. The exposed tooth surfaces were treated with adhesives and the molds were filled with amalgam. In group 5, the mold was filled with composite resin and light-cured for 40 seconds. The author measured all specimens for bond strength 24 hours after amalgam filing and analyzed fracture surfaces. The following results were obtained: 1. Among the dentin groups, groups 1, 2 and 4 showed significantly lower bond strength compared with group 5(P<0.05). 2. Among the enamel groups, group 4 showed significantly lower bond strength compared with group 5(P<0.05). 3. In group 2, 2D showed significantly lower bond strength compared with group 2E(P<0.05). Other adhesives showed no such differences in bond strength between dentin and enamel(P>0.05). 4. Cohesive failure was observed in groups 1E and 5D, while mixed failure was seen in groups 1 and 5. Only adhesive failures were noted in groups 2, 3, 4.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.45-49
• /
• 2010

Research on nitrate-nitrogen ($NO_3-N$) leaching in turfgrass indicates that in most cases leaching poses minimal risk to the environment. Although there have been many studies investigating $NO_3-N$ leaching, there has been little research to investigate the effect of compaction level and rootzone mix on nitrogen (N) leaching. The research objective is to determine the effect of compaction level and rootzone mix on nitrogen leaching. The four rootzone mixes are 76.0:24.0, 80.8:19.2, 87.0:13.0 and 93.7:6.3 % (sand:soil). The four levels of compaction energies are 1.6, 3.0, 6.1, and 9.1 J $cm^{-2}$. Nitrogen was applied using urea at a rate of 147 kg $ha^{-1}$ split among three applications. Rootzone was packed into a polyvinylchloride pipe with a perforated bottom to facilitate drainage. Rootzone depth was 30 cm over a 5 cm gravel layer. Each column was sodded with Poa pratensis L. Hoagland solution designed for coolseason grasses, minus N, was used to ensure adequate nutrition in the rootzone. Turf grass quality and clipping yield were recorded from each tube at two-week intervals. The clippings were oven-dried at a temperature of $67^{\circ}C$ for 24 h and weighed. At the end of the study, root dry weight was determined by washing and oven-drying samples at $67^{\circ}C$ for 24 h. Leachate solution was collected weekly for analysis. More than 6.1 J $cm^{-2}$ of compaction energy increased possibilities of surface runoff. The compaction energy between 3.0 and 6.1 J $cm^{-2}$ produced more clipping dry weight and less N leaching than 9.1 J $cm^{-2}$.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.18-43
• /
• 2011

The results of study on planting and cultivate of Hong Man-Seon(1643~1715)'s 'Salimkyungjae(The Economy of Forest)' the first summative textbook of agricultural skill of South Korea, are as follows. First, 'Salimkyungjae' suggests that one can enrich oneself, eat fruits in fall, enjoy the shade of trees in summer, and enjoy flowers in spring if one plants tree with 10 year plan with knowledge of ecology. Second, the number of plants had increased continuously from the early Chosun Dynasty to the mid Chosun Dynasty. The 52 plants in the book are classified into 31 trees, 8 shrubs, 3 others, and 10 herbs, and 28 of them are fruit trees. Hence, we can see that the book is for the promotion of welfare. Third, planting(transplantation) is the best on January of the lunar calendar, and the second on February, and fertile soil should be added much. Trees must be planted as deep as once it was planted, and buttressed. It will sprout well if it is planted at the depth of one inch, and planting a cutting should be carried out at the early March with 5 inch and finger-thick branches. Grafting is the best when it begins to sprout. Fruit trees will bear many fruits if they are grafted at the direction of South, and fruits will be greater if the trees' branches are cutting off on January. Especially, January was selected for the best season of planting traditionally. Fourth, flower trees are planted or sowed with manure around January and February of the lunar calendar, and it is recommended to replant them into flowerpots with manure when having flower buds around March and April of the lunar calendar. It would bloom earlier when using water mixed with stable manure, and sulfur smoke can be used in order to change the flower color from red to white. Flowerpots would be placed at half shaded lot with being supported by bricks. Pomegranate, gardenia, camellia and four-season flower should be planted after flowers fallen. When flower trees are beside walls, they need to be rotated frequently since their branches all point toward house. Seeds need to be preserved in a sunny hut, where its entrance and ventilating openings would be at south because it is convenient to manage pots. Fifth, insects hidden at fruit trees would be destroyed by torch smoke when roosters cry on New year's day of the lunar calendar. Insects would be decoyed into straw hanged at dawn of Cheongmyeongday(淸明日). Insects on fruit trees would be controlled using sulfur powder to close up holes or sulfur smoke to fumigate. Particularly, it suggests that utilization of fertile soil would be the best solution for growing health plants and preventing pest.