• Title/Summary/Keyword: 구도보정

Search Result 6, Processing Time 0.023 seconds

Auto Correction Technique of Photography Composition Using ROI Extraction Method (ROI 추출을 통한 사진 구도 자동 보정 기법)

  • Ha, Ho-Saeng;Park, Dae-Hyun;Kim, Yoon
    • Journal of Information Technology and Architecture
    • /
    • v.10 no.1
    • /
    • pp.113-122
    • /
    • 2013
  • In this paper, we propose the method that automatically corrects the composition of a picture stylishly as well as reliably by cropping pictures based on the Rule of Thirds. The region of interest (ROI) is extracted from a picture by applying the Saliency Map and the Image Segmentation technology, the composition of the photo is amended based on this area to satisfy the Rule of Thirds. In addition, since the face region of the person is added to ROI by the Face Detection technique and the composition is amended by the various scenario according to ROI, the little more natural picture is acquired. The experimental result shows that the photo of the corrected composition was naturally amended compared with the original photo.

A Method of Auto Photography Composition Suggestion (사진의 자동 구도 보정 제시 기법)

  • Choi, Yong-Sub;Park, Dae-Hyun;Kim, Yoon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.19 no.1
    • /
    • pp.9-21
    • /
    • 2014
  • In this paper, we propose the auto correction technique of photography composition by which the eye line is concentrated and the stable image of the structure can be obtained in case the general user takes a picture. Because the general user photographs in most case without background knowledge about the composition of the photo, the subject location is not appropriate and the unstable composition is contrasted with the stable composition of pictures which the experts take. Therefore, we provide not the method processing the image after photographing, but he method presenting automatically the stable composition when the general users take a photograph. The proposed method analyze the subject through Saliency Map, Image Segmentation, Edge Detection, etc. and outputs the subject at the location where the stable composition can be comprised along with the guideline of the Rule of Thirds. The experimental result shows that the good composition was presented to the user automatically.

Evaluation of Ductility Factors for MDOF Systems in Special Steel Moment Resisting Frames (철골 연성 모멘트 골조에 대한 다자유도 시스템의 연성계수 평가)

  • Kang, Cheol-Kyu;Han, Young-Cheol
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.8 no.6 s.40
    • /
    • pp.13-22
    • /
    • 2004
  • Ductiluty factor has played an important role in seismic design as it is key component of response modification factor(R). In this stuty, ductility factors() are calculated by multiplying ductility factor for SDOF systems() and MDOF modification factors(). Ductility factors() for SDOF systems are computed from nonlinear dynamic analysis undergoing different level of displacement ductiluty demands and period when subjected to a large number of recorded earthquake ground motions. The MDOF modification factors() are proposed to account for the MDOF systems, based on previous studies. A total of 108 prototype steel frames are designed to investigate the ductility factors considering the number of stories(4, 8 and 16-stories), framing system(Perimeter Frames, PF and Distributed Frames, DF), failure mechanism(Strong-Column Weak-Beam, SCWB and Weak-Column Strong-Beam, WCSB), soil profiles(SA, SC and SE in UBC 1997) and seismic zone factors(Z=0.075, 0.2 and 0.4 in UBC 1997). It is shown that the number of stories, failure mechanisms (SCWB, WCSB), and soil profiles have great influence on the ductility factors, however, the structural system(Perimeter frames, Distributed frames), and seismic zones have no influence on the ductility factors.

A Study on the Development of Hoist Balance Controller (권양기의 밸런스제어장치 개발에 관한 연구)

  • Yoon, Jong-Beom;Lee, Jong-Chan;Choi, Jang-Geon;Lee, Jae-Hoon;Goo, Do-Hyeong
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.2591-2593
    • /
    • 2005
  • 본 연구는 물체의 좌우측 상단에 연결된 와이어로프를 모터 및 드럼을 통하여 감아 올리거나 내려 놓는 과정에서 물체가 수평상태를 유지하여 이동될 수 있도록 Two Motor-Two Drum 형식의 권양기를 제어 하는 권양기의 밸런스제어장치에 관한 것이다. 본 연구에 Two Motor-Two Drum 형식의 권양기 제어장치에 있어서, 물체의 상단에 연견된 일측 와이어로프와 타측 와이어로프의 이동길이를 실시간으로 검출하는 와이어로프 이동길이검출부와, 이 와이어로프 이동길이검출부를 통하여 검출되는 일측 와이어로프와 타측 와이어로프의 이동길이를 비교하여 물체의 기울어진 좌 우 편차를 검출하는 편차검출부와, 이 편차검출부를 통해 검출되는 좌우 편차를 제거하기 위하여 일측 또는 타측 와이어로프가 감겨있는 드럼을 회전시키는 모터의 구동속도를 조절하여 물체를 수평상태로 보정하는 밸런스제어부로 구성 되어 있다.

  • PDF

Geometric Region Reconstruction of Steel-tube Computed Radiography Using Nonlinear Structural Analysis (비선형 구도해석에 의한 강관 CR영상의 기하학적 영역복원)

  • Hwang, Jae-Ho
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.46 no.6
    • /
    • pp.146-152
    • /
    • 2009
  • The steel-tube is exposed to a radiation from X-ray source. The transmitted radiation is detected by a detector, usually film or more recently an imaging plate(IP) of Computed Radiography(CR). The detected radiation overlaps the region of both sides of the object. The radiographic images reflect the projections of the rays, passing twice through both external and internal tube material. Nonlinear distortion due to the radioactive transmission and geometric disposition also appears on images. In this paper, an analytical approach is presented to achieve image reconstruction from the steel-tube CR images. Parameters related to radiation and measuring structure, such as intensities, absorption in material and geometric specifications linked with the collimating components, are calculated and identified in order to construct the renoval images for twofold regions of circle-type steel tubes. A correction procedure for region recovery most similar to the true tube is designed. The application of this approach on CR images is shown and reconstructed results are discussed.

Effect of working patterns on eating habits in manufacturing workers of Gwangju area (광주지역 제조업 근로자의 근무형태가 식습관에 미치는 영향)

  • Yim, Ji-Suk;Heo, Young-Ran;Jeong, Eun;Lee, Jae-Joon
    • Journal of Nutrition and Health
    • /
    • v.49 no.6
    • /
    • pp.495-505
    • /
    • 2016
  • Purpose: This study was conducted to investigate and analyze the association between stress from shift and non-shift work as well as the effects living habits have on eating habits in order to identify why and how workers can improve their health and form proper eating habits for higher working efficiency. Methods: The subjects of this study were 361 workers from K manufacturing company from April 7 to 11, 2014 and they were surveyed using a questionnaire. The subjects were divided into two groups according to working pattern: shift workers (n = 216) and non-shift workers (n = 110). Results: In the general characteristics, there were significant differences in age, work career, work time, marriage, monthly income, and education levels between the two groups. For healthy behaviors, significant differences in subjective health status, moderate physical activity, drinking, smoking, and sleep time were observed between shift workers and non-shift workers. For eating habits, scores of non-shift workers having a regular mealtime, balanced meal composition, and vegetable and seaweed intakes were significantly higher than those of shift workers. The sum score of dietary habits in non-shift workers was also significantly lower than that in shift workers (p < 0.05). Total job stress score did not significantly differ between the two groups. Conclusion: The sum of eating habit scores according to work types was $16.1{\pm}0.6$ in non-shift workers and $14.0{\pm}0.3$ in shift workers. These results suggest that it is necessary to provide food suitable to characteristics of different workers according to work type which should be provided along with daily nutrition counseling to help subjects recognize their status.