• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.563-582
• /
• 2000

Two Cretaceous(80-90 Ma) non-marine sedimentary basins, Namyang and Tando Basins, are distributed in the Namyang area, Hwaseonggun and in the Tando area, Ansanshi, Kyungki Province, Korea. The Namyang and Tando Basins are composed of 10 facies, which are pooped into 5 facies associations(FA). FA I consists of massive conglomerate facies, normally graded conglomerate facies and reversely graded conglomerate facies, which is interpreted to have been formed by laminated sandstone facies, massive conglomerate facies(channelized), which is thought to have been formed by sheet flow, stream flow and suspension sedimentation in an alluvial/braided plain environment. FA III consists of massive mudstone(pebbly) facies, laminated mudstone facies, massive sandstone facies and is interbedded by channel-fill conglomerate. It is interpreted to have been deposited by suspension settling during flooding and channel-fill deposition in a floodplain environment. FA IV consists of massive conglomerate facies, normally graded conglomerate facies, massive sandstone facies, normally graded sandstone facies, and laminated sandstone facies and is interbedded with mudstone facies. It is thought to have been deposited by debris flow and turbidity current in a fan-delta environment. FA V consists of massive mudstone facies, laminated mudstone facies, laminated sandstone facies and is interbedded by massive conglomerate bed. It is thought to have been formed by suspension sedimentation and low-density turbidity current in a lake. In the Namyang Basin FA I is distributed in the eastern and southern margin of the basin, FA II in the middle part of the basin as north-south tending band. and FA III in the western part. In the Tando Basin FA II is distributed in the middle part of eastern margin and in the northwestern margin, FA IV in the southwestern part, and FA V in the central part. Correlation of the facies associations shows that FA I and II in the Namyang Basin are distributed in the lower to middle part of stratigraphic sequence and FA III in the upper part of the sequence whereas FA II and IV in the Tando Basin are in the lower to middle part and FA V in the upper part of the sequence. These patterns of facies associations distribution suggest that the Namyang Basin was developed as an alluvial fan and alluvial/braided plain at first and then evolved into a floodplain whereas the Tando Basin was developed as a fan-delta and alluvial/braided plain at first and then evolved into a lake environment.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.9-19
• /
• 1982

The aim of this study was to improve the startability of the diesel engine at low temperature. The specific objective was to determine the optimum type of precombustion chamber. The eight different types of precombustion chamber and two different types of the cylinder head were designed and tested by $2^7$ factorial experiments with four replications. The lowest starting temperature for first operation, the maximum output, and the specific fuel consumption at full load and overload were checked and analyzed. The results of the study are summarized as follows; 1. The lowest starting temperature was lowered as much as $2.4^{\circ}C$ and the maximum output was increased as much as 0.3 ps with respect to the difference in the relative angle of the main passageway against the piston head from 20 degree to 18 degree. 2. The lowest starting temperature and the maximum out-put were lowered as much as $3.3^{\circ}C$ and 0.3 ps respectively with respect to the difference in the angle of the cylinder head groove from 20 degree to 18 degree. 3. The lowest starting temperature and the maximum out put were lowered as much as $2^{\circ}C$ and 0.2 ps respectively with respect to the difference in the length of the precombustion chamber from 17.5 mm to 15.5mm. 4. There was no significant difference in the startability but the maximum output was increased as much as 0.2 ps with respect to the difference in the diameter of the main passageway from 4.8mm to 4.5mm. 5. The lowest starting temperature was obtained under the condition at 47 degree in the angle of the main passageway and at 18 degree in the angle of the cylinder head groove. The maximum output and the minimum specific fuel consumption was obtained under the condition at 4.5mm in the diameter of the main passageway and at 17.5mm in the length of the precombustion chamber. 6. The angle of the cylinder head groove and the main passageway appeared to the major factors affecting the startability significantly. The interaction between the diameter of the main pass ageway and the length of the precombustion chamber had an significant influence on the maximum output. So it would be recommended to study further on the interaction between two factors mentioned above by expanding their levels. 7. The optimum condition suggested by this study could lower the starting temperature by $6^{\circ}C$ compared to the conventional precombustion chambers.

• Journal of Nutrition and Health
• /
• v.42 no.6
• /
• pp.577-595
• /
• 2009

This study aimed to reanalyze energy and nutrient intakes of 2007 Korean Nutrition and Health Examination Survey (KNHANES) using CAN-Pro 3.0, a commonly used nutrient analysis software in Korea. Food items and their codes were selected from 2007 KNHANES dietary intake file and converted to food codes of CAN-Pro 3.0 nutrient database (NDB). Of the 1,324 total food items, 1,155 items were converted by direct matching, 123 items were matched using other items in CAN-Pro 3.0 NDB and 42 items were matched using external sources. Consumption frequencies of items converted by direct matching contributed 94.5% of total consumption. Nutrient intakes of 4,091 participants of 2007 KNHANES, over 1 year old, were recalculated using CAN-Pro 3.0 NDB and compared with intakes in 2007 KNHANES dietary intake file. Intakes for energy and all nutrients except protein and Vitamin C calculated by two NDBs were significantly different by paired t-test (p < 0.001), but significantly correlated by Pearson' correlation coefficients (p < 0.001). Percent differences between the NDBs ranged from 0.3% to 15.1%, low for protein, energy, vitamin C, iron, vitamin B$_2$ (below 5%) but high for phosphorus, retinol, vitamin A, and $\beta$-carotene (over 10%). Age group, sex, and their interactions significantly influenced six nutrients (p < 0.05). Intake levels of zinc, vitamin B6, vitamin E, folate and cholesterol were not available in 2007 KNHANES but were calculated by CAN-Pro 3.0. Mean intake levels of zinc, vitamin B$_6$, vitamin E, and folate by age and sex groups revealed that some groups had mean levels below RI (Recommended Intake) or AI (Adequate Intake) levels. Intake level of cholesterol was higher than the recommended level (below 300 mg/day) in some groups, especially males. Results of the present study indicate the need for comparable and more comprehensive NDB to be used for dietary assessment of KNHANES and other researches. More rigorous evaluation of nutrients which have not been reported in KNHANES is needed.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.16-26
• /
• 2010

Objective: The purposes of this study were to evaluate the force and stress depending on the type, deflection and thickness of the materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Methods: Four types of thermoplastic products were tested. Force until the deflections of 2.0 mm and the stress when the materials were restoring to its resting position were evaluated. The mechanical properties of thermoplastic materials evaluated after 5 repeated loading cycles. Results: The interaction was observed between the thickness and the deflection (p < 0.05) from the regression equation. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. The stress recorded was more than 19 gf/$mm^2$. During repeated loading, each group showed significant difference on the force and the stress (p < 0.01), 10 - 17% reduction of force and 4 - 7% reduction of stress in average. Conclusions: Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the physiologic tooth movement. Force decay after repeated loading should be considered for the efficient tooth movement.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.495-504
• /
• 2018

This study was conducted to develop items to measure scientific core competency based on statements of scientific core competencies presented in the 2015 revised national science curriculum and to identify the validity and reliability of the newly developed items. Based on the explanations of scientific reasoning, scientific inquiry ability, scientific problem-solving ability, scientific communication ability, participation/lifelong learning in science presented in the 2015 revised national science curriculum, 25 items were developed by five science education experts. To explore the validity and reliability of the developed items, data were collected from 11,348 students in elementary, middle, and high schools nationwide. The content validity, substantive validity, the internal structure validity, and generalization validity proposed by Messick (1995) were examined by various statistical tests. The results of the MNSQ analysis showed that there were no nonconformity in the 25 items. The confirmatory factor analysis using the structural equation modeling revealed that the five-factor model was a suitable model. The differential item functioning analyses by gender and school level revealed that the nonconformity DIF value was found in only two out of 175 cases. The results of the multivariate analysis of variance by gender and school level showed significant differences of test scores between schools and genders, and the interaction effect was also significant. The assessment items of science core competency based on the 2015 revised national science curriculum are valid from a psychometric point of view and can be used in the science education field.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.275-286
• /
• 1993

This experiment was to study the effects of application rates of mineral N and cattle slurry on the dry matter yield of Orchardgrass grown in different cutting frequency. Annual rates of mineral N of 0($N_0$), 90kg($N_1$), 180kg($N_2$) and 270kg／ha($N_3$) in 3 cuttings, and 0($N_0$), 120kg($N_1$), 240($N_2$) and 360kg/ha($N_3$) were applied as urea in 4 cuttings. Cattle slurry applied at rates of $30m^3(S_1)$, $60m^3(S_2)$ and $90m^3/ha(S_3)$, suppling 90kg, 180kg and 240kg N/ha in 3 cuttings, and at rates of $40m^3(S_1)$, $80m^3(S_2)$ and $120m^3/ha(S_3)$, suppling 120kg, 240kg and 360kg N/ha in 4 cuttings, respectively. The results were summarized as follows; 1. Mineral N and cattle slurry application rates(N), and cuts(C) were significant differences at the 0.1% level(p<0.001), and 5% level(p<0.05) for the interaction of $N{\times}C$ in both cuttings. 2. The annual dry matter yields obtained were 8.8ton-10.1ton/ha at rates of $N_1-N_3$, and 7.1ton-9.5ton/ha at rates of $S_1-S_3$ in 3 cuttings. The annual dry matter yields obtained were 10.9ton-13.9ton/ha at rates of $N_1-N_3$, and 6.9ton-11.2ton/ha at rates of $S_1-S_3$ in 4 cuttings, respectively. 3. Relative efficiency of cattle slurry N for the dry matter production of Orchardgrass pasture as compared to mineral N were 91.4%(ranged from 72.2% to 109.7%) in 3 cuttings, and 75.1%(ranged from 48.3% to 107.9%) in 4 cuttings, respectively. 4. The annual cattle slurry application rates required to maintain highest dry matter yields were estimated to be 90m3/ha(270kg N/ha) and 80m3/ha(240kg N/kg) in 3 and 4cuttings.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.349-360
• /
• 2016

This study determined mineralogical characteristics and discussed the meaning of mineralogical changes of the lower Choseon Supergrouop in the Weondong area based on the field geological investigation and the drilling core description using X-ray diffraction (XRD) mineral quantification and Scanning Electron Microscopy (SEM) observation. 100 samples with depth were collected from the core (250 m long) at a site in the study area. Especially, to investigate the changes from the upper Daegi Formation to the lower Hwajeol Formation, the samples were collected closely with the interval of about 0.3 m at this section. All samples were made into power using mortar for XRD. Mineral quantitative analysis was executed using Relative Intensity Ratio (RIR) method with corundum as an internal standard phase. Calcite, $2M_1$ illite and quartz are main constituents in most of samples. Dolomite and siderite are significantly observed in the Sesong Formation. As the results of quantitative analysis for the major minerals, the upper Daegi Formation is dominated by calcite with over 80%. The Sesong Formation includes high percentage of dolomite and siderite with the intercalation of thin layers containing high calcite and $2M_1$ illite contents. Hwajeol Formation is characterized by the alternation between thin layers of $2M_1$ illite and quartz-dominated layer (IQDL) and calcite-dominated layer (CDL). IQDL is more frequent in the lower part, whereas CDL is more common in the upper part. The boundary between Daegi Formation and the Sesong Formation is distinct, whereas the boundary between the Sesong Formation and the Hwajeol Formation tends to be changed gradually in mineralogy. The result of SEM observation shows that quartz and $2M_1$ illite are detrital, and a significant amount of calcite also shows detrital form with some recrystallized one, indicating that the repeated influx of terrestrial materials had changed the mineralogy of the shallow sea depositional environment in the early Paleozoic era.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1999.06a
• /
• pp.97-117
• /
• 1999

This study was performed to investigate the effect of pork on the cadmium detoxification in rats. Ninety male Sprague-Dawley rats weighing $125.3{\pm}1.4g$ were divided into five groups based on cadmium treatment(0, 25, 50, 100, 250ppm) and five levels of Cd in AIN-76 purified diet had been fed for 8 weeks. Cadmium was supplemented with a form of $CdCl_2$.. During following 8 weeks of intoxication, casein was replaced by pork and the effect of pork on cadmium- detoxification was compared with casein. After 8 weeks of Cd intake had resulted in apparent cadmium intoxication; reduced growth rate, enlarged kidney and testis, decreased hematocrit value and hemoglobin content in response to the supplemented Cd levels in the diets. Discontinuing cadmium feeding, the body weights were relieved. Pork-fed groups seemed to have higher body weight than casein-fed groups. Hemoglobin content and hematocrit value became normal range at detoxification stage. The weights of liver, kidney, and testis were decreased along with cadmium intake. However, organ weight ratio was not affected by cadmium. Cadmium accumulation in liver and kidney showed a tendency to increase in the cadmium-exposed groups. The levels of metallothionein were also significantly elevated in the tissues of liver in response to the levels of Cd supplemented(p<0.05). Cadmium concentration in kidney was two times higher than that in liver. Cadmium removal rate of liver was higher than that of kidney. Cadmium accumulation of the pork-fed group was lower than that of casein. Especially, the factors which affected the cadmium contents in kidney were $Cd^{***}$ and $Cd{\times}pork^{***}$. Metallothionein(MT) was increased with cadmium, and MT was not likely to be affected by pork. Based on the findings from gross lesion, rats fed 250ppm of Cd were externally emaciated, had exposed penis and observed atrophies of kidney and testis. Histopathological observation seemed that the liver of groups feeding Cd supplemented diets showed cellular degeneration and accumulation of eosinophilic materials in the capillaries. In kidney, rats fed Cd diets had shown tubular epithelium degeneration and lesions of basophilic materials, while testis were weakened in numbers of spermatid and sporadically enlarged of giant cells. But the rats administered cadmium-detoxified diet supplemented pork for 7 weeks were shown individually decreased lesions compared with the rats supplied with casein diet.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1549-1560
• /
• 1969

When this experiment was treated with various factors of times and vacant intervals of intermittent irrigation in order to search for the effect on the growth of rice-plant and ti's amount of havestr, the following results were obtained during the period of this study. 1. Temperature was high, precipitution during nuturitive growing period, was suitable and Much rainfull, scanty sunlight during reproductive growing period and especially during decrease-sementation period, the cultivative situation of rice-plant of 1968 was almost similar to that of mean year. 2. It was found out that the quality of irrigated water used in the experioment was due to ti's neutural acidity. 3. The soil used in each experimental section was good for fertiligation and similar to the quality of general soil according to the result of soil analysis. 4. It was generally found out that the earlier times of intermittent irrigating and the longer vacant intervals of intermittent irrigation, the worse the growing condition of segmentation period was. 5. When vacant intervals of suspension of water supply were longer, the begining of being in ear of rice-plant ant the time tended to be late about one day. 6. In the view of the growth of maturity period and the amount of intermittent irrigation, it tended to be that the length of stalk of rice-plant was short when time of intermittent irrigation began earlier and the length of ear which came from any various section was not different. When times intermittent of irrigation began gradually early, the number of ears, grains and the weight of grains tended to decrease depending on times of that. All the growing of rice-plant and the amount of havesty tended to decrease, depending on which vacant intervals of intermittent irrigation were long. Finally, it was founedt out that from the point of view of the statistical analysis of weight of grains, it was more then 1% what highly significance of mutual action between times and vacant intermittent irrigation was researched.