• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.374-374
• /
• 2012

최근 기후변화에 따라 강우양상이 급격한 변화를 나타내고 있다. 년 평균 강우량의 증가뿐만 아니라 국지성 강우강도가 현저히 증가하여 홍수의 위험이 증대되고 있다. 강우특성변화에 따른 정확한 수문분석이 필요하고, 설계홍수량 산정을 위한 강우의 시간분포의 선정이 매우 중요하다. 본 연구에서는 기상청 서울지점의 계획강우분포를 도출하기 위해 국내에서 사용되고 있는 강우 시간분포 설정방법 중 Huff의 방법, Yen-Chow방법, 교호블럭법, Keifer-Chu방법을 비교 분석하였다. 확률강우량 산정을 위하여 기상청 관할 서울지점의 1954년부터 2010년까지 67년간의 강우량 자료를 사용하였다. 빈도분석은 국립방재연구원의 FARD2006을 이용하여 적합한 확률분포인 확률가중모멘트법에 의한 매개변수 추정과 ${\chi}^2$기법 등에 의한 적합도 검정을 거쳐 선정된 GEV분포를 사용하였고, 강우의 지속기간은 100분, 180분이며 재현기간은 100년, 200년, 300년, 500년으로 였다. 강우시간분포 설정방법 중 첨두강우량은 대체적으로 교호블록법이 가장 크다. Huff방법(2분위)은 첨두강우발생 전의 총 강우량이 첨두강우발생 후의 총 강우량 보다 큰 경향을 보이나, 다른 방법의 경우는 첨두강우발생 후 총 강우량이 전보다 더 크게 나타났다. 많이 쓰이는 방법 중 하나인 Huff 분포에 관하여 좀 더 정확한 연구가 필요할 것으로 사료된다.

• Journal of Korean Society for Quality Management
• /
• v.45 no.1
• /
• pp.55-64
• /
• 2017

Purpose: A large number of attributes with mixed levels are often considered in the conjoint analysis. The respondents may have difficulty with scoring their preferences accurately because of many attribute items involved in each survey question. We research on the technique for reducing the number of attribute items. Methods: In order to reduce the number of attribute items in a survey question, we make a new attribute by merging two original attributes. A 'No question' option is also included as a new level in a merged attribute. Results: We propose BIB $6^4$ design in the case where we have four attributes with 2 levels and 3 levels, respectively and then analyze all the respondents survey data generated by the repeated simulation study in order to compare various model selection methods. Conclusion: How to reduce the number of attribute items is proposed and how to design and analyze the survey data are illustrated.

• Communications for Statistical Applications and Methods
• /
• v.15 no.4
• /
• pp.497-507
• /
• 2008

Confounding techniques have to be used repeatedly in the situations where it is necessary to perform only 2 runs under homogeneous conditions in $2^m$ factorial and fractional factorial experiment. Combinations of confounded $2^m$ factorial and fractional factorial designs enable the estimation of all main effects and all of or a part of 2 factor interaction effects. Defining contrast are used for our designs and treatment combinations of designs to be run are presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.4
• /
• pp.229-237
• /
• 2022

The sewer capacity design have been based on the Huff model or the rational equation in South Korea and often failed to determine optimal capacity, resulting in frequent urban flooding or over-sizing. A time distribution of rainfall (i.e., Huff or ABM method) could be used instead of a rainfall hyetograph obtained from statistical analysis of previous rainfalls. In this study, the Huff method and the ABM method, which predict the time distribution of rain intensity, which are widely used to calculate sewage pipe drainage capacity using the SWMM, were compared with the standard rainfall intensity hyetograph of Seoul. If the rainfall duration was 30 minutes to 180 minutes, the rainfall intensity value calculated by the Huff model tended to be less than the rainfall intensity value of the standard rainfall intensity in the initial 5-10 minutes. As a result, more than 10% to 30% of under-design would be made. In addition, the rainfall intensity value calculated by the Huff model from the section excluding the initial 5-10 minutes of rainfall to the rainfall duration was calculated larger than the value using the standard rainfall intensity equation, which would result in an over-design of 10% to 30%. In the case of a relatively long rainfall duration of 360 minutes (6 hours) to 1,440 minutes (24 hours), it showed an lower rainfall intensity of 60 to 90% in the early stages of rainfall, but the problem of under-design had been solved as the rainfall duration time had elapsed. On the other hand, in the alternating block method (ABM) method, it was found that the rainfall intensity at the entire period at each assumed rainfall duration accurately matched the standard rainfall intensity hyetograph of Seoul.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.642-652
• /
• 2008

The aim of our research was to apply experimental design methodology in the optimization condition of Photo-Fenton oxidation of the residual livestock wastewater after the coagulation process. The reactions of Photo-Fenton oxidation were mathematically described as a function of parameters amount of Fe(II)($x_1$), $H_2O_2(x_2)$ and pH($x_3$) being modeled by the use of the Box-Behnken method, which was used for fitting 2nd order response surface models and was alternative to central composite designs. The application of RSM using the Box-Behnken method yielded the following regression equation, which is an empirical relationship between the removal(%) of livestock wastewater and test variables in coded unit: Y = 79.3 + 15.61x$_1$ - 7.31x$_2$ - 4.26x$_3$ - 18x$_1{^2}$ - 10x$_2{^2}$ - 11.9x$_3{^2}$ + 2.49x$_1$x$_2$ - 4.4x$_2$x$_3$ - 1.65x$_1$x$_3$. The model predicted also agreed with the experimentally observed result(R$^2$ = 0.96) The results show that the response of treatment removal(%) in Photo-Fenton oxidation of livestock wastewater were significantly affected by the synergistic effect of linear terms(Fe(II)($x_1$), $H_2O_2(x_2)$, pH(x$_3$)), whereas Fe(II) $\times$ Fe(II)(x$_1{^2}$), $H_2O_2$ $\times$ $H_2O_2$(x$_2{^2}$) and pH $\times$ pH(x$_3{^2}$) on the quadratic terms were significantly affected by the antagonistic effect. $H_2O_2$ $\times$ pH(x$_2$x$_3$) had also a antagonistic effect in the cross-product term. The estimated ridge of the expected maximum response and optimal conditions for Y using canonical analysis were 84 $\pm$ 0.95% and (Fe(II)(X$_1$) = 0.0146 mM, $H_2O_2$(X$_2$) = 0.0867 mM and pH(X$_3$) = 4.704, respectively. The optimal ratio of Fe/H$_2O_2$ was also 0.17 at the pH 4.7.