• Title/Summary/Keyword: 교합

Search Result 2,934, Processing Time 0.027 seconds

MANAGEMENT OF INFRAOCCLUDED MANDIBULAR SECOND PRIMARY MOLARS: CASE REPORT (저위교합된 제 2유구치에 대한 치험례)

  • Kwak, So-Youn;Park, Ki-Tae;Kim, Ji-Yeon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.36 no.3
    • /
    • pp.475-480
    • /
    • 2009
  • An infraoccluded tooth is a tooth that has failed to erupt to be in line with adjacent teeth in the vertical plane of occlusion. Multiple complications can occur as a result of an infraoccluded tooth. Tipping of neighboring teeth, loss of space opposing teeth elongation, increased susceptibility to dental caries and abnormal eruption path, impaction and rotation of permanent successor are the consequences of infraocclusion of primary molar. Therefore, early diagnosis and treatment is the key to prevent the complications. Treatment options can be periodic follow-up, temporary restoration or extraction of the infraoccluded tooth depending on the presence of the successor, the extent of infraocclusion and the extent of tilting of the neighboring teeth. The infraoccluded primary molars with permanent successors present tend to exfoliate normally. However, failure to do periodic check up of the infraoccluded teeth may lead to serious complications. In these cases, surgical extractions are often necessary after space regaining and space maintainers should be placed until the eruption of the permanent successors are completed.

  • PDF

A case report of single crown restoration using an intraoral scanner for occlusal evaluation (단일 치관 수복 시 구강스캐너를 이용한 교합평가 활용 증례보고)

  • Song, Jun-Beom;Lee, Jong-Hyuk;Ha, Seung-Ryong;Choi, Yu-Sung;Choi, Sun-Young
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.3
    • /
    • pp.341-349
    • /
    • 2021
  • The evaluation of occlusion using digital methods is easier and simpler in terms of recording, comparison, analysis, and objectivity compared to existing methods such as articulating paper and occlusion foil. The purpose of this case report was utilizing the digital method for evaluating occlusion. The occlusion of patient requiring full veneer crown restoration was evaluated using an intraoral scanner (i500, Medit, Seoul, Korea) at every visit. The occlusion was also assessed using conventional articulating paper and a digital occlusal analysis system (Dental prescale II, GC corp., Tokyo, Japan) for comparison. Throughout the treatment process, the intraoral scanner and the conventional articulating paper method showed similar outcomes. The results suggest that the use of digital evaluation system is highly probable in the near future.

A STUDY ON OCCLUSAL CONTACT USING COMPUTERIZED OCCLUSAL ANALYSIS SYSTEM (Computerized Occlusal Analysis System을 이용한 Occlusal Contact에 관한 연구)

  • 연태호;김영구
    • Journal of Oral Medicine and Pain
    • /
    • v.14 no.1
    • /
    • pp.81-88
    • /
    • 1989
  • 저자는 정상 치열을 가지며 두개하악장애의 증상 및 병력이 없는 성인 21명을 대상으로 computerized occlusal analysis system인 T-Scan system을 이용하여 교합력에 따른 치아접촉수와 총치아접촉시간을 측정한 후 정량적인 분석을 시도하여 다음과 같은 결론을 얻었다. 1. 최대 측두근 전부 근활성도의 약 20%, 50%, 80% 수준의 교합력에서 치아접촉수의 평균은 각각 1.6개, 8.8개, 16.7개로 교합력이 증가할수록 유의하게 증가하였다. 2. 최대 측두근 전부 근활성도의 약 20%, 50%, 80% 수준의 교합력에서 치아당 치아접촉수이 평균은 대구치에서는 0.2, 1.4, 2.2 개였으며 소구치에서는 0.1, 0.5, 1.1개였고, 전치에서는 0.1, 0.2, 0.6개로 교합력이 증가함에 따라 유의하게 증가하였다. 3. 치아접촉분포로 구분된 대칭군과 비대칭군간의 총치아접촉시간에는 유의한 차이가 없었다.

  • PDF

Treatment of Traumatic Occlusion (외상성교합의 처치)

  • Hwang, Gwang-Se
    • The Journal of the Korean dental association
    • /
    • v.21 no.6 s.169
    • /
    • pp.459-462
    • /
    • 1983
  • 교합의 부조화는 외상성교합을 야기시킬 뿐만 아니라 치태의 침착을 용이하게 하며 일단 침착된 치태의 제거에도 애로점이 있고 외과적으로 치주낭을 제거하기 위한 술식을 적용할 때에도 문제점이 있다. 따라서 교합의 부조화를 치료해주는 교합치료는 완벽한 치주처치를 위한 중요한 한 분야이다. 특히 치주과 영역에서 외상성교합의 처치는 필수적이며, 그 방법도 대단히 다양하다. 외상성 교합의 증상에 따라서 치료방법을 선택하자면 다음과 같다. 우선 치은조직에 치은퇴축 혹은 형태의 이상이 야기되었을 때에는 이에 따라 외과적인 처치가 선행되어야 함은 물론이며 다음 단계가 치아의 위치이상을 교정적인 처치를 통하여 정복하거나 동요치를 안정시켜줄 필요가 있으며 또한 정확한 교합조정술이 필요하다. 교합조정술에 대한 제반 사항과 술식에 대하여는 본지, 1982년도 6월호에 상세히 언급되었으므로 본 원고에서는 교정적인 처치방법과 치주고정장치의 적용에 대하여 기술 하고자 한다.

  • PDF

A Comparative Study on Chewing Movement in Normal Occlusion and Skeletal Class III Malocclusion (정상교합자와 골격성 III급 부정교합자의 저작운동형태의 비교)

  • SUNG, Kee-Hyuk;SUNG, Jae-Hyun
    • The korean journal of orthodontics
    • /
    • v.27 no.5 s.64
    • /
    • pp.801-813
    • /
    • 1997
  • A comparative study was made on the chewing movements of normal occlusion and skeletal class m malocclusion. Thirty normal occlusion subjects and twenty skeletal class III malocclusion patients were given chewing gums for the study : using BioPAK system, the chewing movement on the frontal plane was recorded and analyzed. With a typical chewing path chosen representing each subject, chewing width, opening distance, opening and closing angles, maximum opening and closing velocities were observed. Seven characteristic patterns were classified based on the types of chewing paths. The followings are the results : 1. Compared with the normal occlusion group, the skeletal class III malocclusion group showed more varied and vertical chewing patterns. 2. In comparision of chewing widths, skeletal class m malocclusion group showed narrower path than the normal occlusion group(p<0.01). 3. In opening distance, skeletal class III malocclusion group appeared shorter than the normal occlusion group without statistical significance(p>0.05). 4. In opening and closing angles, skeletal class III malocclusion group showed more acute angles than the normal occlusion group(p<0.01). 5. In maximum opening and closing velocities, skeletal class III malocclusion group was slower than the normal occlusion group but with no statistical significance(P>0.05). 6. In the classification of chewing movement pattern, the normal occlusion group had Type II as the highest rate at 73.4% ; in skeletal class III malocclusion group, the highest rate was Type III at 35.0%, followed by Type II at 30.0% 7. In the classification of chewing movement pattern, Type IV(chopping type)of skeletal class III malocclusion group showed a higher rate with 25.0% over 3.3% of normal occlusion group.

  • PDF

The objective and quantitative analysis of malocclusion - Part 2. Influence of malocclusion components to treatment difficulty (부정교합의 객관적 정량분석: Part 2. 부정교합 요소들의 치료난이도에 미치는 영향)

  • Joo, Bo-Hoon;Lee, Ki-Soo
    • The korean journal of orthodontics
    • /
    • v.35 no.1 s.108
    • /
    • pp.69-81
    • /
    • 2005
  • As one of the variations in growth and development of the craniofacial complex. malocclusion shows lack of concordance In the recognition and severity of malocclusion for dentists as well as the acceptance and need of orthodontic treatment for the patient The purposes of this study were 1) to examine the relationships between objective malocclusion severity aid subjective treatment difficulty. 2) to evaluate the effect of malocclusion components to the subjective perceived difficulty of treatment. 3) to establish the weighted values of malocclusion components to reflect the treatment difficulty 100 pairs of dental casts with the general characteristics of malocclusion. were selected from the orthodontic departments of Kyunghee University and Samsuug Medical Center. The severity of malocclusion was evaluated by the author with the PAR index The perceived treatment difficulty and the estimated treatment duration on these dental models were evaluated by 8 experienced orthodontists. The relationships between the objective malocclusion severity and the subjective treatment difficulty were statistically evaluated. and the weighted values of malocclusion components to reflect treatment difficulty were statistically formulated. There were significant relationships between objective malocclusion severity and subjective treatment difficulty The malocclusion components which significantly affected the treatment difficulty and their weighted values in parentheses were as follows upper anterior alignment(1). overbite (2). buccal occlusion (3) middline (4), and overjet (5). This study Provides the fundamental principle to evaluate the objective malocclusion severity which is reflected by the subjective treatment difficulty of Korean orthodontists.

RELATIONSHIP BETWEEN CO-CR DISCREPANCY AND FACIAL SKELETAL TYPE (안면골격 형태와 중심교합위-중심위 변위간의 상관성에 관한 연구)

  • Cho, Jin-Young;Lee, Young-Jun;Park, Young-Guk;Chung, Kyu-Rhim
    • The korean journal of orthodontics
    • /
    • v.28 no.5 s.70
    • /
    • pp.839-853
    • /
    • 1998
  • The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.

  • PDF

임상가를 위한 특집 4 - 교합기를 이용한 교합안정장치의 제작

  • Kim, Seong-Taek
    • The Journal of the Korean dental association
    • /
    • v.47 no.6
    • /
    • pp.359-363
    • /
    • 2009
  • 지난 수십여 년 간 턱관저 및 저작근의 질환과 광범위한 보철 및 교정 수복 시 사용되었던 교합안전장치의 작용기전에 관하연느 아직 논란이 많다. 그러나 현재까지의 연구는 기존의 하악을 생리적으로 안정된 위치로 변화시킨다는 개념보다는 구강 내 장치가 위치함으로 인해 저작계의 행동변경(behavioral modification)으로 인해 구강 내 부기능적인 습관이 일시적으로 개선되는 것이라는 개념이 지배적이다. 좀 더 면밀히 말하면 이에 대한 보다 체계적인 연구가 필요한 게 사실이다. 본문에서는 그동안 사용되었던 여러 교합안전장치의 제작법 중에서 교합기를 이용하는 방법을 기공과정을 통하여 알아보고자 한다.

  • PDF

악기능장애 환자의 교합재구성에 있어서 중심위와 새로운 치료과두위의 중요성

  • Lee, Seung-Gyu;Lee, Seong-Bok;Choe, Dae-Gyun
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.17 no.2
    • /
    • pp.125-135
    • /
    • 2001
  • 교합조정이나 대부분의 보철치료는 비가역적이어서 명확한 치료 계획이 없이는 섣불리 치료를 시작하지 말아야 한다. 명확한 치료 계획을 위해서는 증상의 원인 인자를 파악해야 하나, 때때로 그 원인이 불분명하여 환자에게 무어라 설명해야 할지 난감한 경우가 많은 것이 바로 이 분야이다. 교합 재구성을 함에 있어서 생체 역학과 근육의 활동량을 고려해야 하는 것은 이미 주지하고 있는 바이다. 즉, 악관절이나 치아에 대한 하중을 조절함으로써 근조직의 안정을 도모하여 적정한 하악위와 원활한 하악운동을 획득하는 것이 교합 재구성의 큰 목적 중 하나이다.

  • PDF

중심위(Centric relation)의 임상적 의의

  • Jang, Ik-Tae
    • The Journal of the Korean dental association
    • /
    • v.21 no.9 s.172
    • /
    • pp.705-711
    • /
    • 1983
  • 교합의 기본이 되는 하악의 위치와 치아접촉상태는 중심교합위와 중심위의 두개의 기초적 개념으로 분류되는데 교합을 정상적으로 유지하고 기능적 상태로 부여하기 위해서는 다수의 논란이 지속되고 있으며, 하악의 중심성(Centricity)에 관한 개념간의 차이에 관하여 어떠한 관계를 나타내느냐는 문제가 최근의 임상적 쟁점의 초점이 되고 있는 것이다.

  • PDF