• The Journal of the Korean dental association
• /
• v.24 no.12 s.211
• /
• pp.1003-1011
• /
• 1986

총의치 교합에는 관계되는 많은 개념, 기술, 철학이 있다. 이 교합의 기본 법칙들을 이해하고, 어떤 system의 교합이 사용되던 간에 이를 현명하게 잘 적용해야할 것이다. 어떤 교합이, 인공치를 어떻게 배열해야만이 환자에게 가장 안전하면서 효율적인가를 알아내 이를 환자에 적용토록 부단히 노력하는 것이 치과의사의 책임일 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.4
• /
• pp.309-315
• /
• 2016

Recently, finite element analysis technique has been widely used for structural and mechanical understandings of human body in the dentistry field. This research proposed an effective finite element modeling method based on CT images, and parametric studies were performed for the occlusal simulation. The analyses were performed considering linear material behaviors and nonlinear geometrical effect, and validated with the experimental results. In addition, the skull models with two different molar relations such as Class I and full-CUSP Class II were generated and the analyses were performed using the proposed analytical method. As results, the relationships between the mandibular movement and occlusal force of both two models showed similar tendency in human occlusal force. However, stress was evenly distributed from teeth to facial bone in the skull model with Class I, while stress concentration was appeared in the model with full-CUSP Class II due to the changes of occlusal surfaces of the model.

• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.551-557
• /
• 2001

Occlusion of the dural-sac in the lumbar spine was quantitatively analysed using a one motion segment finite element mode developed in this study. Occlusion was quantified by calculating the cross sectional area chance of the dural-sac. In static analysis. less than 2 kN of compressive load could Produced no dural-sac occlusion. whereas 6kN load reduced cross sectional area by 4%, and produced 7.4%, 10.5% occlusion for additional 8 Nm. 10 Nm extension moments. respectively. In creep analysis, 10 Nm extension reduced cross sectional area and volume of the dural-sac by 6.9% and 2.4%, respectively. However. flexion moment could not produce any occlusion. The results suggested that occlusions may result mainly from slackening of ligamentum flavum and disc budging.

• Journal of Oral Medicine and Pain
• /
• v.15 no.1
• /
• pp.45-53
• /
• 1991

저자는 두개하악 장애로 교합상치료를 받고있는 42명의 환자를 대상으로 치료전, 치료후 1개월, 3개월, 6개월째에 주관적 평가, 임상적 검사, 근전도 검사, 컴퓨터 교합 분석을 시행하여 다음과 같은 결론을 얻었다. 1. 주관적 평가인 visual analogue scale과 Helkimo's anamnestic dysfunction index는 유의하게 감소하였다. 임상적 검사시 MM(mandibular movement), TM(TMJ capsule palpation), EM(extraoral muscle palpation), Di(Helkimo's clinical dysfuction index)는 유의하게 감소하였고 무통성 개구량은 유의하게 감소하였다. 2. 42명의 환자중 10명에서 교합변화가 관찰되었으며, 5명에서 치주질환, 2명에서 치아 과민감, 1명에서 구토경향이 관찰되었다. 3. 치주칠환을 보이는 10명의 환자중 3명은 교합상치료 이전부터 치주질환에 이환된 상태였으며 3명에서는 교합변화가 함께 관찰되었다. 4. 교합변화를 보인 10명의 환자중 교합상의 장착시간을 줄였을 때, 3명이 원래의 교합상태로 회복되었고 4명은 부분적으로 회복되었으며 3명에서는 변화를 관찰할 수 없었다. 5. 악관절 내장 제 5기 환자에서 교합변화가 더 빈번히 나타났으며 통계적으로 유의한 차이를 보였다. 6. Habitual clenching 시와 Maximal clenching 시 사이의 치아접촉점 수, maximal clenching 시의 치아 접촉점의 수와 접촉 치아수 사이에 매우 유의한 상관관계를 보였고, habitual clenching 시의 치아접촉점의 수와 접촉 치아수, Habitual clenching 시와 maximal clenching시 사이의 치아 접촉시간에서도 유의한 상관관계를 보였다.

• The Journal of the Korean dental association
• /
• v.25 no.10 s.221
• /
• pp.913-916
• /
• 1987

저작운동을 중추신경계와 말초조직의 작용에의해 일생동안 학습과 적응의 가정을 통해 이루어진다. 저작의 양상은 유치가 구강내에 맹출되면서 이루어지며, 상하악 치아의 접촉, 점막과 혀 및 치아상호간에 일어나는 접촉과 치근막의 고유수용기와 악관절 수용기등에 의해 조정되어 최종적으로 에너지소비가 적고 동통이나 불편함이 없이 최대의 효율을 나타내는 양상으로 된다. 그러나 원활한 저작과 하악은동을 이룩하기 위해서는 저작근, 악관절, 상하악 치아의 교합등이 서로 조화를 이루어야 한다. 만일 외상에 의해 악관절의 기능장애가 오면 저작근활동이 변화하고 이에따라 교합장애를 야기한다. 또한 치아를 상실하거나 대합치아간의 조기접촉이 있으면 교합장애가 원인이 되어 근육활동이 변화와 악관절 기능장애를 초래한다. 그리고 때로는 지나친 근육의 활동(이갈이, 지속적 긴장성 수축)에 의해 지나친 치아의 마모로인한 교합장애나 악관절장애를 일으킬 수 있다. 따라서 하악의 기능을 충분히 이해하기 위해서는 교합의 형태학적 관계와 더불어 저작계의 기능적인 면도 고려하여 그 상호관계를 검토하여야 하며 본문에서는 교합에 관련된 저작근의 작용과 이에 영향을 주는 요인 및 교합장애와 근육활동장애의 연관성에 관해 고찰코자 한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.127-136
• /
• 2018

The patient who has severely absorbed residual ridges, treatments are challenging to satisfy many factors: support, retention, stability, etc. The neutral zone or monoplane occlusion with non-anatomical tooth would be helpful to get additional retention and stability. The monoplane occlusion has been used long time because it can eliminate horizontal forces and many other advantages. The lingualized occlusion was introduced to improve chewing efficiency and esthetics. But from a stability aspect, it seems controversy between monoplane occlusion and lingualized occlusion. This case report shows the results of the treat two flat residual ridge patients using functional impression; piezography, and made 2 other dentures with monoplane and lingualized occlusion that patient can select denture.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.113-122
• /
• 1998

Stabilization splint therapy Precedes orthodontic intervention to enable the operator to find a 'true' centric(which is stable and comfortable), to test the patient's response to a change in the occlusion, prior to embarking upon a complex course of occlusal therapy : and finally, to see if the centric relation position can be stabilized. For this study, 47 malocclusion Patients enrolled for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University comprised the malocclusion group, little variation of growth factor by the second molar eruption. They had Cr-Co discrepancy beyond normal range. For each patients the stabilization splint with mutually protected type of occlusal scheme was applied for 3 months. Condylar positions in CR and CO were measured using Penadent articulators, Panadent condylar position indicator(CPI), and transcranial projection before & after stabilization splint therapy. On the basis of this study, the results of this study were as follows 1. In all samples using CPI, there were statistical significances in CR-CO discrepancy(p<0.001) both before 8t after stabilization splint therapy. 2. In Rt and Lt+Rt/2 of superior joint space using transcranial projection, there were statistical significances in CR-CO discrepancy({<0.05) before & after stabilization splint therapy. 3. In supero-inferior components using CPI, there were statistical significances in CR-CO discrepancy(p<0.01) before & after stabilization splint therapy. 4. In all components except Rt using transcranial projection, there were no statistical significances in CR-CO discrepancy(p>0.05) before & after stabilization splint therapy. To sum up, CPI might be more effective than transcranial projection to reveal the changes between CR-CO discrepancies and stabilization splint might be more useful appliance for displaying the vertical changes, than the antero-posterior changes, of condylar position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.108-113
• /
• 2004

This study was to evaluate and compare differences of the cervical vertebral skeletal maturity of normal occlusion and skeletal Class III malocclusion. Normal occlusion (172 girls) and skeletal Class III malocclusion(191 girls) were classified according to diagnosis stone model and lateral cephalogram of Korean girls aging from 8 to 12 years. The concavity of inferior border, vertico-horizontal ratio of cervical vertebrae were observed and measured according to age. Differences of the cervical vertebral skeletal maturity were evaluated. The results were as follows : 1. The concavity of inferior border of the 2nd to 6th vertebrae of normal occlusion and skeletal Class III had uniformly increased with age. 2. The vertico-horizontal ratio of the 3rd to 6th vertebrae of girls with normal occlusion and skeletal Class III had uniformly increased with age. 3. There was no significant difference in cervical vertebral skeletal maturity between normal occlusion and skeletal Class III malocclusion in the concavity of inferior border of the 2nd to 6th vertebrae and in the vertico-horizontal ratio of the 3rd to 6th vertebrae. The results in the study indicate that there is no significant difference of cervical vertebral skeletal maturity between girls with normal occlusion and skeletal Class III malocclusion.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.255-268
• /
• 1998

This study was investigated to assess the difference of facial height and occlusal plane inclination between normal occlusion group and class II malocclusion group. The subjects consisted of 50 normal occlusion (male 25, female 25) and 50 class II(male 25, female 25) malocclusion patients. All subjects are adult. lateral cephalogram was taken with standard method traced, and digitized for each subjects. The computerized statiscal analysis was carried out with SPSS program. The results were as follows 1. In class II malocclusion group, variables significant different from normal occlusion group were as follows ; SN-FOP, FH-BOP, MP-BOP, AB-BOP, AB-FOP, Facial plane-BOP, FP-FOP 2. In class II malocclusion group, the posterior facial height -especially posterior lower facial height-was significantly smaller than normal occlusion group.(P<0.05) 3. In class II malocclusion group, the angles between occlusal plane and upper and lower incisor, the angle between upper molar and bisected occlusal plane were significantly larger than those of normal occlusion group. (P<0.05) 4. L1 to Mandibular plane (mm) was a unique factor of occlusal plane position that showed significant difference in class II malocclusion group. 5. The correlation between overbite and occlusal plane inclination existed in class II malocclusion group, but the correlation didn't exist in normal occlusion group.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.453-463
• /
• 1995

Most commonly used axis for central incisors in lateral cephalometric radiographs is the line connecting root apex and incisor edge. However, crown axis and root axis do not always coincide in cases of malocclusion patients. The angle created by these axis are called the collum angle, which should be considered in orthodontic diagnosis and treatment. In this study, 31 Class I malocclusion, 30 Class II division 1 malocclusion, 31 Class II division 2 malocclusion, and 31 Class m malocclusion patients were selected and their collum angles were measured. Correlation between these angles and malocclusions was investigated, and the correlation analysis with other parameters in cephalometrics was done. The results were as follows ; 1. The mean collum angles according to the types of malocclusions are ; $3.11^{\circ}{\pm}3.54^{\circ}$ for Class I, $1.23^{\circ}{\pm}2.41^{\circ}$ for Class II division 1, $3.77^{\circ}{\pm}4.39^{\circ}$ for Class II division 2, and $3.90^{\circ}{\pm}4.08^{\circ}$ for Class III malocclusion. 2. Statistically significant differences in collum angles were noted between Class II division 1 group and Class II division 2 and Class III group. 3. Significant correlations were found between collum angles and other parameters used in cephalometrics, namely IMPA for Class I, Wits for Class II division 1, Overbite for Class II division 2 and for ClassIII.