• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.153-159
• /
• 2019

Purpose: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. Materials and Methods: This study was conducted in a total of 308 teeth from 148 patients with palatal side abfractions in maxillary posterior teeth. The occlusal wears in maxillary premolars and molars with palatal side abfractions were classified and recorded. The classification was done by type of teeth, age, and gender, and in order to evaluate the statistical significance between groups, chi-square test was conducted (${\alpha}=0.05$). Results: Palatal side abfractions in maxillary posterior teeth were observed at the highest frequency in the 1st molars, and in all teeth with palatal side abfractions, more than one occlusal wear was observed. In classification by type of teeth, by age, and by gender, the occlusal wears in teeth with palatal side abfractions were observed at high frequency in cuspal inclined plane, central fossa, and marginal ridge, and there was a statistical significance (P < 0.05). Conclusion: Palatal side abfractions were observed at the highest frequency in maxillary 1st molars, and in all maxillary posterior teeth where palatal side abfractions were found, the occlusal wears were observed. And the occlusal wears were observed at high frequency in cuspal inclined plane, central fossa and marginal ridge. Such results show that abfraction is associated with occlusal force.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.839-853
• /
• 1998

The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.81-97
• /
• 1994

두개하악장애는 환자의 신체적 소인, 관련조직의 구조적 변화, 정신적 스트레스 등의 복합적 요인에 의 발생하는 다인성 질환으로 최근 대두되는 원인중의 하나가 신체, 특히 두경부의 자세이상이다. 비정상적인 두경부자세는 하악의 위치변화를 수반하여 종종 두개하악장애를 야기시키게 되나 이를 설명할 수 있는 과학적 증거는 아직 부족한 실정이다. 저자는 두경부 자세가 교합장치물에 의해 변화되는지를 저작근의 근전도학적 측면에서 규명하고자 21세에서 26세의 치과대학생으로 치아상실 및 교합간섭이 없고 두 개하악장애의 증후 및 경부운동제한을 가지지 않은 정상인 20명을 대상으로 각도계를 사용하여 시상면상에서 인위적으로 유도한 세 가지의 두경부자세변화 (0$^{\circ}$, 30$^{\circ}$ 굴절, 45$^{\circ}$ 신전)에 따른 교합안정장치의 장착(1시 간) 전후 및 안정위와 근접촉위(초기치아접촉위)에서의 두경부 근육(측두근, 교근, 악이복근)의 근전도를 Bioelectric Microprocessor EM2ⓡ를 사용하여 측정한 후 통계학적으로 비교, 분석, 평가하여 다음과 같은 결과를 얻었다. 1. 교합안정장치 장착전 하악 안정위 및 근접촉위에서 두부의 30$^{\circ}$굴절은 악이복근의 근활성도를, 45$^{\circ}$신전은 교근 및 악이복근의 근활성도를 증가시켰다.(p<0.05) 2. 교합안정장치 장착후 하악 안정위에서 두부의 30$^{\circ}$굴절은 악이복근의 근활성도를, 45$^{\circ}$신전은 교근 및 악이복근의 근활성도를 증가시켰으며, 하악 근접촉위에서 두부의 45$^{\circ}$신전은 악이복근의 근활성도를 증가시켰다(p<0.05). 3. 교합안정장치 장착 전후 및 두부의 30$^{\circ}$굴절, 45$^{\circ}$신전에 따른 측두군 및 교근의 하악 근접촉위에서의 근활성도가 안정위에서의 근활성도에 비해 유의한 증가를 나타냈다(p<0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.79-87
• /
• 2017

The open bite malocclusion is a common clinical entity and has multifactorial causes. Development of effective treatment plan and management is dependent on proper diagnosis. The skeletal open bite patient requires a coordinated orthodontic and orthognathic surgical approach to achieve stable occlusion, acceptable esthetics, and improved function. But in case of open bite with severely decayed dentition, restoration in the entire dentition is necessary. Using the facial analysis and diagnostic wax-up, the most effective treatment was prosthetic rehabilitation. The provisional restorations were fabricated to satisfy esthetic and functional requirements, which result in the uniformly distributed occlusal force, anterior and canine guidance. The inter-arch relationship, labio-dental harmony, and the soft tissue aspect, which is important to estimate the longevity were evaluated. Definitive restorations of monolithic zirconia were made by replicating provisional restorations by using the latest CAD/CAM technology. They were delivered to the patient and clinical follow-up observation was satisfactory.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.328-343
• /
• 2023

Recently, a method of fabricating an esthetic anterior fixed prosthesis by integrating data such as three-dimensional facial scan and jaw motion to form a virtual patient with dynamic occlusion has been introduced. This enables smooth communication with patients during the diagnosis process, improves the predictability of esthetic prosthetic treatment, and lowers the possibility of occlusal adjustment. In this case report, a virtual patient with dynamic occlusion was created in which the results of the treatment were simulated, and esthetic maxillary anterior fixed prosthesis was fabricated. With the aid of the virtual patient, the final restorations were satisfactory both in terms of esthetic and function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.119-132
• /
• 2023

The loss of posterior occlusal support due to tooth loss is likely to lead to compensatory protrusion and labial tilt of the anterior teeth, which may be accompanied by a deep bite and a decrease in vertical dimension. The patient may suffer from a decrease in masticatory efficiency, inaccurate pronunciation, facial appearance changes, and temporomandibular joint disorder, so stable occlusal formation with support of posterior occlusion and restoration of vertical dimension is necessary. We report the case of a patient with reduction of vertical dimension, and inaccurate pronunciation due to multiple tooth loss who underwent full mouth rehabilitation with increased vertical dimension accompanied by phonetic analysis and achieved satisfactory functional and aesthetic results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.17-31
• /
• 2018

Purpose: The purpose of this study was to investigate the accuracy of the interocclusal relationship between upper and lower teeth according to the buccal interocclusal record scan using various intraoral scanner systems. Materials and Methods: The upper and lower full arch Models with normal occlusion were scanned with 5 intraoral scanners (Cerec Omnicam, CS3500, iTero, Trios, True Definition). Buccal interocclusal record scan was taken only at the left side while occlusion was intentionally raised by 1 mm, 2 mm, 3 mm, and 4 mm with metal cylinder core embedded within polyvinylsiloxane bite registration material at the right molar region. The superimposition analysis was done to evaluate overall three-dimensional deviation and cross-section analysis was done to evaluate the degree and the direction of deviation of interocclusal relationship. Results: From the superimposition study, Cerec Omnicam showed the least deviation ($165.5{\mu}m$) and CS3500 ($369.0{\mu}m$) showed the largest (P < 0.01). And the deviation was greater in 3, 4, 2 mm group than 1 mm (P < 0.01). From the cross-section study, Cerec Omnicam showed the farthest deviation ($-242.8{\mu}m$) and CS3500 showed the closest deviation ($312.5{\mu}m$) and a significantly high value was shown in 3 mm group. Conclusion: Every intraoral scanner has different accuracy in reproducing interocclusal relationship.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.296-305
• /
• 2013

For the purpose of evaluating the prevalence of malocclusion and self-esteem in adolescents, 1,380 middle-school students in the Yangsan area were surveyed by oral examination and questionnaires and the obtained results were as follows: The distribution of 1st molar occlusion by Angle's classification was 69.0, 19.4, 10.6% for Class I, II and III respectively. In the horizontal relationship, the prevalence of normal overjet and crossbite was 86.9% and 5.6% respectively whereas larger and extremely larger overjet was found in 6.6% and 0.8%. In the vertical relationship of anterior teeth, normal, deep overbite and openbite was shown in 94.1%, 4.7%, and 1.2%. For the midline discrepancy, the distribution of groups with 0~1 mm, 2~4 mm and over 5 mm was 98.2%, 1.4%, and 0.4%. Crowding only in the maxilla was found in 9.6%, while that only in the mandible and in both arches was 14.1% and 24.1% respectively. Spacing only in the maxilla was seen in 3.0%, while that only in the mandible and in both arches was 2.4% and 1.7% respectively. Significant difference in self-esteem was revealed in female and malocclusion groups of crossbite and openbite(p < 0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.