• Title/Summary/Keyword: 교합촬영

Search Result 197, Processing Time 0.02 seconds

Radiologic Diagnosis of Temporomandibular Joint (측두하악관절의 영상진단)

  • Park, Hyok;Chung, A-Young;Jung, Da-Woon;Kim, Seong-Taek
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.28 no.3
    • /
    • pp.291-299
    • /
    • 2012
  • There are many kinds of techniques for imaging temporomandibular joints. None of them for imaging "best fit" for every patient of temporomandibular disorder is recommended ideally. It is more important to be able to select the modality that is most adequate and appropriate for a given clinical issue.

Effect of Botulinum Toxin type A and Occlusal Splint on Masseter Muscle Evaluated with Computed Tomographic Measurement (전산화 단층촬영으로 평가한 교근에 대한 보툴리눔 A형 독소주사와 교합안정장치의 효과)

  • Jang, Hee-Young;Kang, Seung-Chul;Kim, Seong-Taek;Kim, Chong-Youl;Choi, Jong-Hoon
    • Journal of Oral Medicine and Pain
    • /
    • v.30 no.2
    • /
    • pp.247-255
    • /
    • 2005
  • The purpose of this study is to evaluate the effect of botulinum toxin type A on masseter muscle atrophy and the extent of masseter muscle affected from the injection site in relation to injection dose, with and without occlusal splint therapy through computed tomographic measurement. 32 volunteers were divided into four groups - group 25U (injection dose of 25 unit), group 25Us (injection dose of 25 unit with occlusal splint), group 35U (injection dose of 35 unit), group 35Us (injection dose of 35 unit with occlusal splint). Each group consisted of 8 people. 3 positions (position 1, 2, 3 - 10mm, 20mm and 40mm from the inferior border of the mandible, respectively) were selected for the evaluation of the masseter muscle change. The following results were obtained. 1. The thickness and the cross-sectional area of the masseter muscle had reduced in all groups except for the right side thickness at position 3 of group 25U and group 25Us, and the right side thickness as well as the left side cross-sectional area at position 3 of group 35Us. In group 35Us, the thickness and the cross-sectional area of the masseter muscle had reduced significantly in all positions (P < 0.05). 2. There was no significant difference in the masseter muscle change between the injection dose of 25unit and that of 35unit. 3. The groups with occlusal splint showed greater reduction of the masseter muscle thickness than the other groups (P < 0.05). From the above results, botulinum toxin type A injection together with occlusal splint therapy in the treatment of masseter muscle hypertrophy would be clinically effective.

ROC Analysis of Acid Demineralized Artificial Caries (인공치아 우식병소 진단의 ROC 분석)

  • Kang Byung-Cheol
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.27 no.2
    • /
    • pp.7-13
    • /
    • 1997
  • 조직학적으로 유용성이 입증된 산탈회법을 이용한 인접면 비교적 초기 치아 우식의 병소를 형성하여 진단율을 조사하였다. 산 용액을 이용하여 20개 인접면 치아우식을 20개 소구치에 형성하였고, 37개 인접면 치아우식을 30개 대구치에 형성하였다. 건전한 소구치 20개, 대구치 30개를 포함하여 총 96개 치아를 4개씩 나누어 24개의 블록을 형성하였고, 각각 2개 블록의 교합면을 교합시켜서, 교익촬영을 하였다. 촬영 결과를 36명의 치과의사들이인접면 치아우식의 유무를 기록하고, 동시에 및 ROC 분석을 위한 5 개 범주의 판독 기준으로 판독하여 기록하였다. 인접면 치아우식증 유, 무만으로 판독한 결과 진단의 sensitivity는 0.71, specificity는 0.78 이였다. ROC 분석 한 결과의 곡선도표 아래부분의 평균 면적은 약 0.806 이였다. 치아우식증 유무만으로 진단한 결과는 특정한 sensitivity와 specificity 만을 나타내지만, ROC 분석 결과는 주관적 진단 기준과 구별되는 고유의 진단 능력을 표시하는 1-specificity(False Positive)의 변화에 따른 sensitivity(True Positive)의 변화를 연속적으로 나타내어 주었다.

  • PDF

GEOMETRIC CORRECTION OF RADIOGRAPHIC IMAGES USING GENERAL PURPOSE IMAGE PROCESSING PROGRAM (일반 영상처리 프로그램을 이용한 방사선사진의 기하학적 보정에 관한 연구)

  • Cheong Ji-Seong;Kim Eun-Kyung;Lee Sang-Hoon
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.24 no.2
    • /
    • pp.371-379
    • /
    • 1994
  • 본 연구는 비규격화시켜 촬영한 두장의 방사선 사진을 일반 영상처리 프로그램으로 기하학적 보정을 하여 디지탈 공제 촬영술을 시행한 결과를 개인별로 제작된 필름유지장치를 이용하여 규격화 시켜 촬영한 두장의 방사선사진을 디지탈 공제 촬영술을 시행한 결과와 비교하여 일반 영상처리 프로그램의 임상적 유용성을 평가해보고자 시행하였다. 19명의 자원자를 대상으로 하여, 각 환자에서 4매의 하악구치부 치근단 사진을 촬영하였다. 그중 2매는 XCP 필름 유지장치만으로 평행촬영법으로 촬영하였고, 나머지 2매는 교합제에 인상재를 부가하여 개인별로 제작된 XCP필름 유지장치를 이용하여 표준화시켜 역시 평행촬영법으로 촬영하였다. 기하학적 보정은 "Adobe Photoshop"과 "NIH Image" 프로그램으로 시행하였다. 특히 "Adobe Photoshop"의 임의영상회전 기능과 "IH Image"의 공제시술시 중첩된 사진을 투명하게 보여주는 기능, 병진기능을 활용하였다. 두 사진의 유사성을 측정하기 위해 공제된 사진의 계조도의 표준편차를 구하였다. 표준화군의 평균 표준편차가 기하학적 보정군의 평균 표준편차보다 약간 낮았으나, 통계적으로 유의성이 있는 차이를 보이지는 않았다. 위의 결과로 미루어보아, 하악구치부 에서 XCP필름 유지장치로 평행촬영한 비표준화방사선사진을 "Adobe Photoshop"과 "NIH Image" 프로그램을 이용하여 기하학적 보정을 할 수 있으리라 사료된다.

  • PDF

Analysis of oral radiography practice (구강방사선 실습내용에 관한 분석)

  • Ahn, Geum-Sun;Kim, Hyo-Jeong
    • Journal of Korean society of Dental Hygiene
    • /
    • v.11 no.5
    • /
    • pp.783-790
    • /
    • 2011
  • Objectives : The purpose of this study was to examine students' difficulties in the process of oral radiography practice, to raise awareness of the importance and necessity of oral radiography and decipher, and to provide some information on effective ways of oral radiography practice. Methods : The subjects in this study were 285 dental hygiene students at K college, who included 153 sophomores and 132 graduates-to-be from June to November, 2010. Results : 1. The parts of the anatomy structure that they found it most difficult to decipher were maxillary molar(25.3%) and lower molar(22.1%). 2. They made during oral radiography was an improper film positioning(35.1%). 3. The part of bisecting technique was adjusting vertical and horizontal angles(53.0%). 4. The part of paralleling technique was positioning XCP in the oral cavity(44.2%). 5. The part of bite-wing technique was adjusting vertical and horizontal angles(38.2%). 6. The part of occlusion technique was positioning film and tube head(36.5%). 7. The part of panorama technique was finding out program setting(42.5%). Conclusions : The findings of the study indicated that in terms of anatomy structure decipher, it's especially difficult to decipher maxillary molar and lower molar, and that film positioning was difficult to do in the process of oral radiography. What difficulties they faced in applying each kind of oral radiography techniques and which part of the oral cavity they found it hard to radiograph were analyzed as well in this study. Given the findings of the study, more intensive practice is required to help students to acquire accurate oral radiography techniques to ensure their successful job performance in the future.

Evaluation of nasolabial angle in adult patients with skeletal Class III malocclusion (성인 골격성 III급 부정교합 환자의 올바른 비순각 평가에 관한 연구)

  • Chang, Jun-Ho;Lee, Shin-Jae;Kim, Tae-Woo
    • The korean journal of orthodontics
    • /
    • v.37 no.4
    • /
    • pp.272-282
    • /
    • 2007
  • The purposes of this study were to evaluate the nasolabial angle changes between closed lip position at centric occlusion and relaxed lip position at which the bite is open so that the lips do not touch and to elucidate the significance of the relaxed lip position for dentofacial diagnosis. Methods: The subjects consisted of 60 (35 Males, 25 Females) skeletal Class III malocclusion adult patients (mean age 23.3 years) with anterior crossbite. Results: In Class III malocclusion adult patients, there were significant differences in the nasolabial angle changes between closed lip position and relaxed lip position. Using the cluster analysis, the subjects were divided into three groups according to the pattern of nasolabial angle change: Group 1 (N = 27, 45%, $-8\;{\sim}\;1$), Group 2 (N = 30, 50%, $2^{\circ}\;{\sim}\;17$), and Group 3 (N = 3, 5%, over 18). Conclusion: The results showed that the pattern of the nasolabial angle change between closed lip position and relaxed lip position varies in skeletal Class III malocclusion patients. Thus, relaxed lip position should be taken into account when diagnostic records are obtained and analyzed to accurately to evaluate the facial soft tissues and predict facial esthetics after surgical-orthodontic treatment.

Analysis of Occlusal Contacts Using Add-picture Method (Add-picture 방법을 이용한 교합접촉점 분석)

  • Park, Ko-Woon;Cho, Lee-Ra;Kim, Dae-Gon;Park, Chan-Jin
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.29 no.1
    • /
    • pp.45-58
    • /
    • 2013
  • The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.

Three dimensional structural analysis between dental arch and basal bone in normal occlusion (정상교합자의 치열궁과 기저골 형태에 대한 3차원적 연구)

  • Kim, Jee-Tae;Lee, Jin-Woo
    • The korean journal of orthodontics
    • /
    • v.41 no.4
    • /
    • pp.224-236
    • /
    • 2011
  • Objective: The purpose of this study was to analyze the dental and basal arch forms in patients with normal occlusion using the computed tomography (CT) imaging method. Methods: CT images were taken from 27 normal occlusion subjects (male, 15; female, 12) and these images were reconstructed into three-dimensional models. A 3D-coordinate system was formed by setting the middle of the facial axis (FA) point of the maxillary central incisors as the origin. The morphology of the maxilla and mandibular dental and basal arches were analyzed by sectioning parallel to the maxillary occlusal plane. Results: There was no significant difference between A point and B point and between the maxillary 1st molars in both sides of the maxillary and mandibular basal bone. The dental arch was located more labially than the basal arch in the anterior portion. The bucco-lingual crossover of the dental arch and basal arch was formed at the molar region in the maxilla, and at the premolar region in the mandible. Conclusions: This study will help provide three-dimensional diagnostic information about the relationship between basal and dental arches in patients who have severe dental compensation and inappropriate jaw relationships.