• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.895-898
• /
• 2008

블랙박스 시스템은 평시 및 사고 직전후의 각종 운행 기록 정보, 영상 정보 등 다양한 사고 정보를 저장할 수 있으며 이에 기반하여 교통 사고를 재현해내는 기술에 대한 활발한 연구가 진행 중이다. 본 논문은 USN 환경에서 차량 간 교통사고 발생시 상대 차량 정보를 블랙박스 내에 저장할 수 있는 시스템을 제안한다. 블랙박스에 저장되는 상대 차량에 대한 정보는 각종 사고 발생시 교통 사고 분쟁 해결에 결정적 요인이 될 수 있으므로 그 중요성이 크다. 제안하는 블랙박스 시스템에 저장되는 정보는 차량 고유 번호, 사고 발생 시간 및 위치 등의 정보이고 그 정보는 허가된 사용자에게만 접근 될 수 있다. 본 논문에서는 두 개의 센서 노드를 블랙박스로 가정하고 임의의 충돌 신호를 발생시켜 상대 차량의 정보를 저장하고, 이를 분석하는 시뮬레이션을 통하여 제안하는 블랙박스 시스템이 사고 차량 정보와 위치, 시간 등을 저장함을 보인다. 수집된 정보는 교통 사고에 대한 과학적인 해석과 사건 재현을 위한 객관적인 정보로 사용 될 수 있다.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2011

In order to reconstruct vehicle-pedestrian collision accidents, this paper presents a fuzzy tool to estimate accurately the impact velocity of the vehicle using parameters which could be easily collectable at the accident scene. The fuzzy rules and membership functions were set up using number of over 200 domestic and foreign data from accidents and empirical tests and 700 data from multibody simulation experiments. The developed fuzzy tool deduces the category of pedestrian trajectory and impact speed of the vehicle using 4 membership functions and 2 logic rules. The membership function of throw distance was differently set according to the deduced category of trajectories. The implemented fuzzy program was validated through comparing with the domestic and foreign empirical data. The output results agree very well in impact velocities of vehicle resulting the accuracy and usefulness of the developed tool in the reconstruction analysis of vehicle-pedestrian collision accidents.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.103-113
• /
• 2005

A pedestrian accident is generally less fully understood than the 'typical' car-to-car collision. For this reason, the analysis of the pedestrian accident is, in many respects, more complicated and demanding. The purpose of this study is to identify clearly the impact point that is the main subject of struggle in pedestrian accidents. In order to develop the model, it is very significant to classify actual accident data including impact velocity. vehicle damage and injury scale of pedestrian. These data were collected from three local branches of RTSA(Road Traffic Safely Authority). The number of collected data were 34 cases and 61.7% of them were fatal accidents. In consequence of analyzing the data by statistical method, it revealed that there is correlation between impact velocity and throw distance. It, also shows that the impact velocity has strong linear correlation to vehicle damage and injury scale. Consequently, reconstruction analysis models of pedestrian accidents considering in local circumstances(such as the physical characteristics of pedestrians and vehicles) was developed However. it is difficult to apply the result of this study to all sorts of pedestrian accidents, because the actual accident data which were used to develop the model were limited. To overcome this limitation, it is necessary to develop an analysis model applicable to diverse circumstances with a wide range of pedestrian accident data on a national basis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5963-5967
• /
• 2014

Reducing the impact of collisions of cars is a major issue for reducing the injury and death of passengers. According to the statistical data of the Road Traffic Authority, the deaths from side collision accidents caused by the collision of passenger cars is greater than the deaths from head-on collision accidents. To accommodate this, vehicle designers have added a reinforcing material called the impact frame and impact beam on the inside of the door. Many experiments are needed to develop the door impact beam. These reinforcements to develop a collision experiment is essential. Collision experiments are costly and time consuming. This study used a drop Impactor to obtain the impulse and a strain experimental device was developed for this purpose. The economic costs were reduced and the ideal experiment device configuration was determined. A comparison of the experimental results with numerical value analysis revealed $3.5{\tiimes}10-3sec$ strain ranging from $3.49{\tiimes}10-3$ to $3.99{\tiimes}10-3$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.217-226
• /
• 2018

Since the sides of a vehicle are designed asymmetrically unlike its front or rear, the degree of deformation of the car body greatly differs depending on the site of collision if a broadside collision takes place. When elastic deformation and plastic deformation occur in the car body occur due to a collision, the kinetic energy is absorbed into the body, and the momentum decreases. Generally, an analysis of traffic accidents analyzes the vehicle's behavior after a collision by the law of momentum conservation and corrects the error of the amount of energy absorption due to the deformation of the car body, applying a restitution coefficient. This study interpreted a finite element vehicle model applying the structure of the car body and the material properties of each part with LS-DYNA, analyzed the result and drew the restitution coefficient and the depth of penetration according to the contact area of the vehicle in a broadside collision between an SUV and a passenger car. When the finally calculated restitution coefficient and depth of penetration were applied to the examples of the actual traffic accidents, there was an effect on the improvement of the error in the result. It was found that when the initial input value, drawn using the finite element analysis model, it had a higher reliability of the interpretation than that of the existing analysis techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.789-792
• /
• 2008

Actually, The present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate for improvement of traffic accident detection rate at intersection. The skid sound of traffic accident is showed the special pattern at $1[kHz]{\sim}3[kHz}$ bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound is showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.227-235
• /
• 2018

Along with the recent increase in traffic volume of vehicles, accidents involving rollover of vehicles have been rapidly increased, resulting in an increase casualties. And to prevent this, various technologies such as vehicle crash test equipment and analysis program development have been advanced. In this study, the applied vehicle model is FORD EXPLORER model, and PC-Crash program for vehicle collision analysis is used to predict the rollover accident behavior of SUV and the collision velocity. Compared with the actual rollover behavior of SUV through the FMVSS No 208 regulations, the analysis results showed similar results, the characteristics of the collision velocity and roll angle showed a tendency that the error rate slightly increased after 1000 msec. Then, as a result of considering using the database of NHTSA, it is shown that the rollover accident occur most frequently in the range of the collision velocity of 15~77 km/h and the collision angle of $22{\sim}74^{\circ}$. And it is possible to estimate the vehicle speed and collision time when the vehicle roof is broken by reconstructing the vehicle starting position, the roof failure position and the stop position by applying the actual accident case.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.311-320
• /
• 1997

사회가 발달함에 따라 교통사고 등에 의한 외상 환자는 20 -30 년전에 비해 기하급수적으로 증가 하고 있으며 그러한 외상 중에 경추부 상해의 빈도는 매우 높다. 경추부 상해 원인을 규명하기 위한 임상학적 시도는 한계성을 지니고 있다. 본 논문에서는 실제 경추부 형상을 바탕으로 근육과 인대 등 을 비선형 스프링, 댐퍼 등으로 수치 모델링하여 후면 충돌시 경추부의 거동과 경추부에 미치는 상해를 구현하였다. 이를 이용하여 편타성 상해와 에어백으로 인한 경추부 골절의 생리학적 원인을 분석하고 자 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.39-47
• /
• 2023

Research on the safety of autonomous vehicle is being conducted in various countries, including the European Union, and computer simulation techniques so called 'Virtual Tool Chain' are mainly used. As part of the crash safety study of autonomous vehicle, 25 car to car collision scenarios were provided as a result of a real accident-based accident reproduction analysis study conducted by a domestic research institution, and a vehicle crash analysis was performed using the FE car to car model of the Honda Accord. In order to analyze the results of the car to car simulation and to construct a database, major crash parameters were selected as impact speed, angle, location, and overlap, and a method of defining them in an indexed form was presented. In order to compare the crash severity of each scenario, a value obtained by integrating the resultant acceleration measured by the ACU of the vehicle was applied. The equivalent collision test mode was derived by comparing the crash severity of the regulation test mode, 30 deg rigid barrier mode, in the same way.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.67-74
• /
• 2014

Recently, the number of road construction is increasing by industrial development. According to this industrial tendency, the number of traffic accidents are consistently increasing due to increasing number of vehicle on the road. This is mainly because traffic accidents are occurred by various parameter such as negligence of driver, vehicle defects, state of unstable road, natural environment etc. Lane department of vehicles from guardrail is occurring frequently. This type of accident is caused by vehicle performance improvement and shape of vehicle, weak guardrail installation and maintenance. Guardrail has the purpose on prevention such as prevention of traffic accident and prevention of deviating out of road, minimizing damage of driver and vehicle by collision as well as entry into the road through guardrail. Stability evaluation test of guardrail verifies the behavior of guardrail through the crash of truck. At this time, the crash condition has 100 km/h of velocity and $15^{\circ}$ of impact angle. In the case of ground condition, filling slope condition has relatively high bearing capacity of infinite ground towards the test. Guardrail is generally installed on road of shoulder in fill slope in korea. It is possible for stability problem to deteriorate ground bearing capacity in Guardrail in fill slope. The existed study towards stability of guardrail has been carried out in the infinite ground. However, the study on the behavior of fill slope with guardrail is not performed by vehicle collision. Therefore, In this study, the numerical analysis using LS-DYNA was executed for verification on behavior of fill slope with guardrail through vehicle collision. This numerical analysis was carried out with change of embedded depth on installed guardrail post in shoulder of fill slope by vehicle collision and 8 tonf truck crash providing at NCAN (National Crash Analysis Center). As the result, displacement and stress on fill slope are decreased in accordance with the increase of embedded depth of guardrail post. Ground bearing capacity is deteriorated at depth of 450 mm form shoulder of road on fill slope.