• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.156-161
• /
• 2016

An R&D project, 'Carbon Neutral Road Technologies Development', sponsored by the Korean Ministry of Land, Infrastructure, and Transport was performed and sustainable development is being discussed in relation to global climate change. A draft of the green highway certification system, the green highway design and construction technologies for making low carbon eco-friendly roads, and Green Highway Technology Investment Evaluation System (GTIES) for estimating and managing carbon emissions from roads have been developed from the results of the R&D project. A scheme for expanding the application of these technologies and building sustainable road systems by considering the concept of sustainability was proposed in this research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1423-1432
• /
• 2011

Since the marine accidents increase with the increased volume of traffic, preventive surveillance technology for safety navigation of the ships before the accident is being emphasized to secure the safety at sea along with post-accident measures. This paper aims to suggest a design based on an integrated safety management platform systems to support nautical safety, implements of bridge operation terminal equipments and alarm system for bridge watch monitoring and abnormal state of navigation/propulsion/machinery/power, and performs a quality evaluation for the actual boarding on the ship based on the classification standards.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2010

This paper presents implementation details of car communications system based on V2I2V model over broadband wireless networks including WCDMA, HSDPA and WiBro. Also, we measures the major performance metrics such as Round Trip Time, end-to-end latency and others between in-vehicle client and location management system by driving across urban areas in Daegu city. Analysis of experimental results would be helpful to consider the applicability of traffic safety services using V2I2V-based car communications over various broadband wireless networks.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.161-167
• /
• 2004

While most or fixed-time control systems such as UTCS produce the signal timing plans that either maximizing bandwidth or minimizing a disutility index of delay and stops, cannot consider the fluctuation of traffic flow. One category of the traffic-response control systems, which make small changes on a predefined signal plan such as SCOOT, cannot be easily modified for feedback real-time control schemes based on observation of variables other than traffic flow. The other category, which decide to whether switch the traffic lights or not at each step of time as in PRODYN, does not adequately consider the relations between traffic flows and traffic lights at each step of time. In this paper we present a complete formulation that adequately consider the relations between traffic flows and traffic lights at each step of time. The formulation is a binary mixed integer linear programing (BMILP) that obtain traffic lights at each step for minimizing delay. Since numarical examples for application of the proposed model illustrated that the model adequately produced dynamic traffic signal plans minimizing delay at each step, the model may be expected to contribute to advanced transportation management systems (ATMS) for dynamic traffic signal control.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.17-28
• /
• 2009

There are many limitations in dealing with rapidly changing traffic demand in urban cities. Thus recently, traffic operation and management skills are more emphasized rather than the expansion of traffic facilities. In particular, in the interrupted flow formed by signalized intersections, it is quite important to give optimal signal timing to each intersection with consideration of progression. However, as fixed signal times per direction can affect passing capacity in signalized intersections, the present four-signal phase including a left-turn signal has many limitations, including reduction of directional road capacity when traffic demand is increases dramatically during peak hours. Because of this problem, lots of studies about internal metering techniques for oversaturated signal control skills have progressed but these techniques are not used widely due to the absence of detectors for queue sensing in real-time signal control systems. In this research, a new methodology called the "restrictive left-turn signal control", which is already used at the intersection above Samsung subway station, is suggested in order to reduce control delay of urban arterial roads. The restrictive left-turn signal control allows a driver to make a U-turn and then a right turn instead of turning left in that intersection. With this change, the restrictive left-turn signal control can contribute to increased intersection capacity by reducing the number of signal phases and maximizing the through phase time. However, road structure and traffic conditions at the target intersections should be considered before the adoption of the proposed signal control.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.106-121
• /
• 2008

In this paper, we proposed and designed the protocol for energy efficiency and the center of data aiming at the design of a Multi Location Awareness System that recognizes a shadow site in parking and tunnel, which stands on the basis of CSS(Chirp Spread Spectrum) method using ISM Band of IEEE 802.15.4a that aware close location with wireless RF only. As a result of the protocol measurement, it displays the observation errors of less than 15cm, the data error rate of less than 5%, and can implement the Multi Location Awareness System with maximum length of life for 13.5 days using battery of 3V(1500 mAh).

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.417-425
• /
• 2019

Storage snapshot technology allows to preserve data at a specific point in time, and recover and access data at a desired point in time. It is an essential technology for storage protection application. Existing snapshot methods have some problems in that they dependent on storage hardware vendor, file system or virtual block device. In this paper, we propose a new snapshot method for solving the problems and creating snapshots on-line. The proposed snapshot method uses a method of extracting the log records of update operations at the virtual file system layer to enable the snapshot method to operate independently on file systems, virtual block devices, and storage hardwares. In addition, the proposed snapshot mehod creates and manages snapshots for directories and files without interruption to the storage service. Finally, through experiments we measure the snapshot creation time and the performance degradation caused by the snapshot.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.15-28
• /
• 2008

According to the accident statistics published by the National Police Agency in 2006, it can be recognized that drivers' characteristics and driving behaviors are the most causational factors on the traffic accidents. At present, although many recording tools such as digital speedometer or black box are distributed in the market to meet social requests of decreasing traffic accidents and increasing safe driving behaviors, it is also true that it still lacks in obvious categories for dangerous driving types and then, the efficiency of the categories to be studied has been low. In this study, dangerous driving types are redefined. They are grouped into 7 classifications in the first level, and the seven classifications are regrouped into 16 in more detail. To verify the redefined dangerous driving types, a Data-logger is developed to receive and analyze the data that occur from the driving behaviors of the test vehicle. The developed Data-logger can be used to construct a real time warning system and safe driving management system with dangerous driving patterns based on acceleration, deceleration, Yaw rate, image data, etc.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2017

Since year 2016, in Korea, the police department started to use drones to patrol violated vehicles on the highway area. They monitor vehicle drivers who use side ways on the highway during traffic congested hours of the season, drunken drivers, or violent drivers. They use the 'Spot Mobility' method which floats the drones for 30 minute period. However, this method is inefficient since it requires manually charging batteries, gathering data, and operate drones with many numbers of policeman. Therefore, in this paper, for the efficient patrol in this purpose, I have suggested an effectively manageable network system consists of many drones as the wireless network nodes and with small numbers of policeman in a wide highway area. To accomplish this, the two topologies of effective drone patrol network systems are designed and simulated in OPNET simulator for performance evaluation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.150-156
• /
• 2011

Smart Highway is a next generation highway that significantly improves a traffic safety, reduces incidence of traffic accidents, and supports intelligent and convenient driving environments so that drivers can drive at high speeds in safety. In order to implement smart highway, it is required to gather a large amount of data including conditions of a road and the status of vehicles, and other useful data. To provide situation information of highway, it has been gathered traffic information using optical sensors(CCTV, etc.). However, this technique has problems such as the problem of information gathering, lack of accuracy depending on weather conditions and limitation of maintenance. It needs radar system which has not effect on environmental change and algorithm processing technique in order to provide information for a safety driving to driver and car. In this paper, it is used radar with 9.4GHz to test performance of a road surface and developed radar system for detecting test. And we compared and analyzed a performance of data acquired from each radar through computer simulation.