• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The lower $2^{nd}$ molar eruption is beginning to mesiolingually, then rotate to distobuccally so it has a tendency to be tilted and impacted mesially. Signs and symptoms of impacted $2^{nd}$ molar are similar to impacted $3^{rd}$ molar's. However, treatment plan for impacted $2^{nd}$ molar is different from that of impacted $3^{rd}$'s. The former is the preservation and uprighting of $2^{nd}$ molar so that it could act to recovery of mastication, symmetrical facial growth, maintaining the symmetry of dental arch, stable occlusion, while the latter is the extraction of tooth. If the uprighting treatment is planned, most proper protocol of treatment and the additional treatment opition should be applied with consideration for it's crown exposure, present of $3^{rd}$ molar which interrupt the uprighting process, extrusion of opposite tooth. Although it could not improve the esthetic result, it could prevent many dental problems. Therefore, uprighting for impacted lower $2^{nd}$ molar is meaningful treatment.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.677-685
• /
• 2000

Anchorage plays an important role in orthodontic treatment. Because of limited anchorage Potential and acceptance problems of intra- or extraoral anchorage aids, endosseous implants have been suggested and used. However, clinicians have hesitated to use endosseous implants as orthodontic anchorage because of limited implantation space, high cost, and long waiting period for osseointegration. Titanium miniscrews and microscrews were introduced as orthodontic anchorage due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and their ability to be placed in any area of the alveolar bone. In this study, a skeletal Class II Patient was treated with sliding mechanics using M.I.A.(micro-implant anchorage). The maxillary micro-implants provide anchorage for retraction of the upper anterior teeth. The mandibular micro-implants induced uprighting and intrusion of the lower molars. The upward and forward movement of the chin followed. This resulted in an increase of the SNB angle, and a decrease of the ANB angle. The micro-implants remained firm and stable throughout treatment. This new approach to the treatment of skeletal Class II malocclusion has the following characteristics . Independent of Patient cooperation. . Shorter treatment time due to the simultaneous retraction of the six anterior teeth . Early change of facial Profile motivating greater cooperation from patients These results indicate that the M.I.A. can be used as anchorage for orthodontic treatment. The use of M.I.A. with sliding mechanics in the treatment of skeletal Class II malocclusion increases the treatment simplicity and efficiency.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.246-251
• /
• 2010

Impactions can occur because of malpositioning of the tooth bud or obstruction in the path of eruption. However, the exact mechanism is still unknown. The impaction of mandibular first molar is rare with prevalence rates of 0.01~0.25%, but it is important to deimpact the tooth as soon as possible to avoid complications such as dental caries, root resorption, and periodontal problems on the adjacent teeth. Several biomechanical strategies have been proposed for uprighting mesially tipped mandibular first molars. However, most of these have had problems with movement of the anchorage unit because of the reciprocal force. The recent development of skeletal anchorage system(SAS) allows direct application of precise force systems to the target tooth or segment, producing efficient tooth movement in a short time. In this case, an impacted mandibular left first molar with dilacerated roots was treated with a miniplate, which provided skeletal anchorage to upright the tooth. The miniplate was installed in the mandibular ramus, and 10 months after the application of orthodontic force, the impacted tooth was exposed in the oral cavity and uprighted. At this point, the mandibular left first molar was included in the orthodontic appliance with fixed mechanotherapy, the tooth could achieve a normal occlusion. Therefore, the use of SAS simplified the orthodontic procedures and reduced the orthodontic treatment period, and had few side effects.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.150-158
• /
• 2007

Objective: The aim of this study was to determine the relationship between the status of a unilateral palatally impacted maxillary canine (as seen on the panoramic radiograph) and the orthodontic treatment duration. Methods: A total of 36 subjects were chosen (8 males and 28 females, $13.7{\pm}2.5$ years). All patients had undergone orthodontic traction of the impacted canine after a closed flap surgery. The position of impacted canine on the panoramic radiograph was traced and calculated with regard to the treatment duration. Results: The canine overlap over the lateral incisor (COGr) had significant statistical difference between the short-term and the long-term treatment duration groups (divided by average treatment time of 21 months) (p<0.05). Multiple regression indicated that the variables of significance (with treatment duration as the dependent variable) were the canine vertical height from the occlusal plane $(HCV,\;r^2=0.115;\;p<0.05)$ and the mandibular anterior width $(MnDW,\;r^2=0.142;\;p<0.05)$. The treatment duration, the canine angle to the incisor midline (CA), and HCV decreased from primary dentition (under 12 yrs) to permanent dentition (15 yrs). Howerer, these increased again at the adolescent ages (over 16 yrs). Conclusion: These findings suggested that orthodontic treatment of a palatally impacted canine would show good prognosis at an age of early permanent dentition with the canine showing smaller CA and HCV.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.343-351
• /
• 1998

The purpose of this study was to investigate the pretreatment and posttreatment dentofacial characteristics of non-extraction patients with Class I malocclusion. And to compare this result with matched non-orthodontic normal occlusion and Class I premolar extraction patients. Such comparison might help identify morphologic characteristics of the non-extraction patients. Initial and final cephalometric evaluation were compared in a sample of 22 patients with Class I malocclusions treated in non-extraction manner with edgewise appliance and MEAW The mean age of the total population was 14 years 9 months and the average treatment time was 2 years 8 months. 32 landmarks were located and digitized on each cephalogram. From these landmarks, 24 linear and angular dimension were obtained. Student's t-test were used to compare the pretreatment - posttreatment results, Nonextraction - Normal groups, and nonextraction Extraction groups. Significance was predetermined at $p{\leq}0.05$. The results were as follows. 1. Before treatment, the mean value of the $ODI\;was\;69.9^{\circ},\;APDI\;was\;82.1^{\circ},\;CF\;was\;152^{\circ},\;EI\;was\;152^{\circ}$ in the non-extraction groups. 2. The skeletal pattern of the non-extraction groups were similar with non-orthodontic normal groupsr, but the non-extraction groups had larger interincisal angle. 3. Comparison between groups treated with and without extraction indicated at pretreatment, the extraction groups had more protrusive lips, smaller interincisal angle, and EI. 4. After treatment, there was no significant changes in the skeletal pattern of the non-extraction groups, but uprighting of the maxillary and mandibular first molar and decrease of the interincisal angle were seen.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.153-163
• /
• 2004

The purpose of this study was to evaluate the postretention change of class II malocclusion treatment and to examine which factors were related to the relapse. Seventy-eight treated cases were divided into two groups according to the stability of treatment results. Various measurements in pre-treatment and post-treatment lateral cephalograms were evaluated and comparisons were drawn between the stable and relapse group by t-test and correlation analysis. 1. There were only a row differences in the skeletodental relationship in the pre-treatment phase between the stable and the relapse group. 2. Mandibles in the stable group were repositioned mote anteriorly than those in the relapse group. 3. Mandibular incisors were more uprighted to the basal bone and maxillary incisors were less lingualized in the stable group than in the relapse group. 4. Occlusal plane was inclined forward and downward in the relapse group.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.91-105
• /
• 2002

In general, orthodontists make problem lists and treatment plans based on norms of several cephalometric standards. But consideration of dentoalveolar compensation, which tends to maintain normal dental arch relationship in various skeletal jaw relationships, helps orthodontists make more individualized treatment objectives and plans. The purpose of this study was to classify skeletal patterns of normal occlusion samples by cluster analysis and to investigate the dentoalveolar compensation according to skeletal patterns. The subjects were consisted of 125 subjects who were normal occlusion samples at Seoul National University Dental Hospital, Department of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized. The skeletal patterns of normal occlusion samples were classified into three horizontal groups and three vertical groups by cluster analysis and ANOVA on the skeletal and dentoalveolar measurements among the groups were carried out. The results were as follows ; 1. Anteroposterior and vertical skeletal relationships of normal occlusion samples were very variable. 2. As the mandibular position was anterior to the maxilla, the maxillary incisors inclined more labially, the mandibular incisors more lingually, and the occlusal plane was flattened due to the anteroposterior dentoalveolar compensation. dentoalveolar height was decreased and upper posterior teeth was uprighted to the palatal plane and lower incisors and lower posterior teeth to the mandibular plane. 4. Lower incisors were more strongly associated with the dentoalveolar compensation than upper incisors according to the anteroposterior and vertical skeletal relationship.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.547-561
• /
• 1998

Obstructive sleep apnea (OSA) is a disorder characterized by repetitive episode of upper airway collapse during sleep. Recent studies showed that not only the anatomic factors but the physiologic factors of the upper airway also have effcts on the occurrence of apnea and that the genioglossus muscle also plays an important role in the maintenance of the upper airway. A variety of therapies were performed to treat OSA, and among them the use of mandibular repositioning appliances showed reasonable results. But there is still a lack of research on the structural and physiological mechanism upon the use of mandibular repositioning appliances. The author selected 26(male 17, female 9) OSA patients that came to the Yonsei University Dental Hospital, Department of Orthodontics, and 20 normal adults (male 10, female 10) and took cephalometric radiographs of them in a supine position before and after the placement of the mandibular repositioning appliance to see the structural changes of the upper airway and compare the therapeutic effects between the two groups. We also studied the waking genioglossus muscle activity in OSA patients and investigated the difference in the electromyogram of the genioglosssus muscle upon the change in body posture and the use of mandibular repositioning appliance. Following results were obtained. 1. Among the cephalometric measurements of the upper airway structure, the length of the soft palate, maximum thickness of the soft Palate and SPAS, MAS, VAL, H-H1, MP-H showed statistically significant differences between the normal and OSA groups, but the IAS and EAS showed no statistically significant differences between the two groups. 2. In both the normal and OSA groups, as the epiglottis moved forward on wearing the mandibular repositioning appliance, the epiglottis level of the upper airway increased and the maximum thickness of the soft palate changed and the hyoid bone also moved forward, but the IAS in both groups showed various results and the effect of the mandibular repositioning appliance on the structure of the upper airway was different in the two groups. 3. Upon changing the position, the electromyogram of the genioglossus muscle showed a increasing tendency but there was no statistically significant differences, and when the mandibular repositioning appliance were worn there was a statistically significant increase in the electromyogram of the genioglossus muscle in both the upright and supine positions. The mandibular repositioning appliances not only have an effect on the anatomical structure of the upper airway but also on the physiology of the upper airway. There are different responses to the use of mandibular repositioning appliance between the normal and OSA groups therefore it could be considered to have the different physiology of the upper airway between the two groups.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.127-142
• /
• 2000

This study have been carried out to find out the mechnical effect of Multiloop Edgewise Arch Wire(MEAW) making use of the finite element method. The tip back bend of MEAW taken in this analysis is $5^{\circ},\;10{\circ}\;and\;15{\circ}$. In addition, Class II or up & down elastic is applied to find out stress distribution and their values in PDL. A adult male of normal occlusion was selected to create the models of teeth and PDL. And the model of MEAW was also created using commercial finite element code (ANSYS version 5.2). The MEAW is forcibly engaged with a class II or up & down elastic, to determine the initial stress generated in PDL. Comparing the compressive and tensile stress at each reference-planes, following results are obtained. 1. When a MEAW of $5^{\circ},\;10{\circ}\;15{\circ}$ tip back bend was engaged with Class II or up & down elastic, the distribution of compressive, tensile stress in entire PDL is similar in each case. 2. The values of compressive and tensile stress in PDL is higher in $15{\circ}$ tip back bend case than in $10{\circ}\;or\;15{\circ}$ tip back bend case. 3. In the distal PDL of 1st and 2nd molar, compressive stress appears. The compressive area is more wide and its values is higher in PDL of 2nd molar than those in 1st molar. The compressive area and its values become more wide and higher according to the increase of the tip back bend. 4. The values of compressive stress are comparatively smaIIer in PDL of molars than those in premolars. 5. Comparing class II and up & down elastic case, tensile stress values in anterior teeth PDL are smaller md their distribution is more wide in up & down elastic case than class If elastic case. On another hand, there is no difference in distribution and stress values in PDL of posterior teeth between two cases. 6. Comparing the tensile area in PDL of anterior teeth, tensile stress values are maximum in PDL of canine.