• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.691-694
• /
• 2004

물리적 힘에 의한 초전도 분말의 균일한 표면 확보 및 고밀도화 가 필요하다. 그러나 전기영동전착법의 특성상 물리적 힘에 의한 고밀도화에 어려움이 따르고 전착후막의 기공과 크랙현상을 발생시키는 단점으로 인하여 전기영동전착법에 의한 입자의 고밀도화를 위해서는 전착과정에서 현탁분말입자의 치밀성 및 일정한 방향성을 위한 공정기술이 요구된다. 전기영동법에 의한 초전도 후막의 특성을 향상시키기 위한 방법으로 DC전계인가 와 AC보조전계 인가방식에 공정이 있으며 이들 두 공정에 의해 제작된 후막의 특성을 비교 분석하고 두 공정기술에 따른 최적화 방안을 연구 하였다. YBCO 초전도 후막의 균일한 표면과 초전도특성 향상을 위한 공정개선방법으로는 수직방향 교류전계 인가 방식을 적용한 공정기술을 전기영동전착 공정에 적용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.493-496
• /
• 2000

This study is about the design and fabrication of optical voltage sensor modules improved in the insulation reliability, where we adopted the space-division voltage system using the auxiliary electrodes to apply the uniform electric fields to the BSO, the device of which the polarization state varies with the variation of refractive index in the electric fields. We measured the output of fiber-Optic Voltage Sensors with the temperature changes in the thermostatic oven. And we measured the output of Fiber-Optic Voltage Sensors after setting its up in the disttibuion automated switch being apply 60Hz alternating voltage from 6.6kV to 17.BkV. In result, measured error characteristic is good, so we can judge it is applicable to the practical case

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.679-685
• /
• 2004

Although the electrophoretic deposition method has the advantage of simple processing procedure, less fabrication facilities, and easier control for deposition thickness and wire length, providing economical and technical merits, it also has the disadvantages of cracking and porosity phenomena, requiring an improved processing method for higher particle density and constant particle orientation. we have developed an optimization method to increase the particle density and to unify its orientation, and have performed a study to overcome the cracking and porosity problems in the fabricated superconductor. In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternate voltage vertically has been developed for the first time and applied to the electrophoretic deposition process. The applied alternate electric field caused a force to be exerted on each YBCO particle and resulted in a rotation of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. We name this process as the shaky-aligned electrophoretic deposition method. For commercial utilization and efficiency, in this dissertation, alternating voltage of 60 Hz and 25 ∼ 120 V/cm was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and Tc,zero of 90 K and the critical current density of 3419 A/$cm^2$.