• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.52-59
• /
• 2015

In the conventional model for the prediction of the railway environmental noise, one used an empirical formula of the total noise level at specific distances. Only a function of the distance to the source was also used to calculate the noise level near the railway bridges. However, the noise varies depending on the position of the receiver as well as the distance from the source especially at concrete bridges. In this paper, a noise propagation model in the railway concrete bridge was derived by considering the diffraction at the bridge deck and the ground effect and applying the ISO 9613-2 noise propagation model. We compared the predicted and measured values of environmental noise at a high-speed railway bridge, and it was confirmed that this prediction model gives relatively small errors.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.123-126
• /
• 2022

본 논문에서는 철도 교량 운행 상황을 가정하는 모형 철도를 사용하여 실제 철도 교량에서 발생할 수 있는 소음, 진동등 위험 요소로 분류될 수 있는 데이터들을 수집하고 수집된 데이터들을 활용하여 실시간으로 위험 요소로부터 발생할 수 있는 위험 상황들을 분류하고 적절한 조치들을 상황에 맞게 취할 수 있도록 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.309-309
• /
• 2010

한국은 산과 강이 많고 평야가 적은 지형적 특성상 터널 구간, 교량 구간 등이 많고 철도 차량이 이러한 구간들을 통과할 때 차량 내부에서 발생되는 과도 소음 또한 자주 발생하게 된다. 정상상태에서 소음에 비하여 과도상태에서 소음은 특성이 급격히 변화하여 승객들에게 더욱 큰 성가심을 유발할 수 있다. 특히 국내에서 운행중인 KTX 와 KTX 산천과 같은 고속철도의 경우 빠른 운행 속도로 인하여 과도 소음의 정도 또한 높아지게 된다. 따라서 더욱 정숙한 승객들의 승차 환경을 조성하기 위하여 과도상태에서의 실내소음 특성분석은 그 중요성이 더욱 커지고 있다. 본 연구에서는 고속철도가 감속 가속할 때, 터널을 통과할 때, 교량 위를 운행할 때, 차량이 교행할 때 등의 과도 상태에서의 실내 소음 특성을 음질평가의 방법으로 분석하고 정상상태에서의 소음 특성과 비교하였다.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.914-923
• /
• 2000

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.225-234
• /
• 1999

• Journal of KSNVE
• /
• v.12 no.5
• /
• pp.304-310
• /
• 2002

• Journal of KSNVE
• /
• v.12 no.5
• /
• pp.311-315
• /
• 2002

• Journal of KSNVE
• /
• v.12 no.5
• /
• pp.322-328
• /
• 2002

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.94-101
• /
• 2019

Most of the existing rail structures have undergone a lot of aging since a considerable period of time has passed from completion. In particular, among existing railway bridges, many of the plate girder bridges are older bridges that have lived 40 to 60 years or more. Since the treadmill is directly connected to the girder without the ballast, the running load of the vehicle is directly transmitted to the bridge. Therefore, the shock and noise applied to the bridge are larger than those of the ballast bridge, and the dynamic shock and vibration are also relatively large. Therefore, it is very urgent to develop appropriate maintenance, repair and reinforcement technology for existing steel plate bridge. In this study, the authors introduced the characteristics of embedded rail (ERS) developed for improving the performance of the existing plate girder bridge and the techniques solving the vibration and noise problems. In order to evaluate the vibration and noise reduction performance of ERS, a non-ballast plate girder bridge with 5m length of sleepers installed and a plate girder bridge with ERS were fabricated. And, then, the vibration response generated under the same excitation condition was measured and analyzed. Also, the radiated noise analysis was performed using the vibration response data obtained from the experiment as the input data of the acoustic analysis model. As a result of experiments and analyses, it was confirmed that the plate girder bridge's vibration using ERS was reduced by 15.0~18.8dB and the average noise was reduced by 7.7dB(A) more than the non-ballast bridge.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.163-164
• /
• 2011