• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.11-17
• /
• 2004

This paper describes the implementation of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been fabricated in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3-metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$, and it has 32.3 ps rms and 335.9 ps peak to peak jitter on loopback testing. the measured power dissipation of whole chip is 1.15 W(230 mW) with a single 5 V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• The Magazine of the IEIE
• /
• v.42 no.1
• /
• pp.103-106
• /
• 2015

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.167-174
• /
• 2012

The circuits including with Optical transceiver and clock data recovery, in this paper, SERDES (SERializer-DESerializer) are implemented to construct a GE-PON burst-mode transceiver supporting IEEE 802.3ah and a jig for measuring the burst-mode characteristics, that is to say, PON upstream optical transmission environment are manufactured to evaluate the performance of transceiver. we verified that the limiting amplifier compensated the gap of max. 26dB optical power by experiments. The startup acquisition lock time is 670ns in case of using VSC7123 and 2300ns in case of S2060 and the data acquisition lock time were measured to be 400ns and 600ns, respectively, in the upstream channel transmission in this work. While on the other, VSC7123 is satisfied with IEEE802.3ah recommendations.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.177-179
• /
• 2003

본 논문에서는 $0.35{\mu}m$ CMOS 공정을 이용하여 2.5 Gbps로 동작하는 광 송수신기를 설계하였다. 광 송수신기의 구성을 보자면, 전기 신호를 빛 신호로 전환하여 주는 레이저 다이오드(LD) 구동부와 레이저 다이오드에서 나오는 빛 신호를 수신하여 이를 다시 전기 신호로 바꿔주는 포토 다이오드(PD) 구동 부분으로 구성된다. LD 구동부는 LD의 문턱전류 이상을 공급하는 바이어스 부분과 신호레벨의 모듈레이션 전류를 공급하는 부분으로 구성된다. 디자인된 송신기는 바이어스 전류를 10 mA 정도 공급하여주며, 모듈레이션 전류를 15 mA 정도 공급한다. 수신기는 current decision 부분과 output buffer 부분으로 구성되어 PD로부터 나오는 전류를 다시 디지털 레벨의 전압신호로 바꾸어 주며 디자인된 수신기는 넓은 동작 영역을 가진다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.309-314
• /
• 2012

In this paper, we present surface-to-underwater visible light communication systems using white LEDs. Pulse position modulation (PPM)-based analogue data communications and on-off keying-based digital data communications systems are developed. Inexpensive and commercial power-LEDs and photo-diodes are used to construct two types of systems. We report the experimental results obtained from the prototype systems to show the possibility of an optical underwater visible light transceiver as a basis for short range underwater wireless network. Their performance deteriorates more than the atmosphere's one because of attenuation and scattering of the light in water, but these results are promising for the potential to create more robust network interface that improve medium performance such as a LED modulation and a photo-detector demodulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.406-409
• /
• 2003

In this paper, a 4-wavelength optical transceiver system is designed and implemented by using TFF (thin film filter) type OADMs (optical add-drop multiplexers). In this new system, the wavelengths of 1510 nm and 1530 nm are used for uploa and download signals, respectively, as well as the wavelengths of 1550 nm and 1310 nm which have been utilized in a 2-wavelength optical transceiver systems. The 4-wavelength optical module show pass characteristics of -1.6 dBm, -1.7 dBm, -5.6 dBm, -5.8dBm for 1510nm, 1530 nm, 1550 nm, 1570 nm, respectively, with 1.2 dBm of input laser power. The isolation for characteristics of the optical module for all the wavelengths are less than -40dB, which is very acceptable for filed requirements.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.64-71
• /
• 2009

Cylindrical lens core for optical transceiver was designed and machined. With the lens design data, WC asymmetric core surface data were generated for non-revolutional ultra-precision grinding. Grinding process for optimum machining conditions of target surface was studied in terms of surface roughness and form profile. We used experimental results to optimize turbine speed, feed-rate and depth of cut with durable grinding wheel wear. Ground WC cores were measured contact type profilers and verified.

• Electronics and Telecommunications Trends
• /
• v.16 no.5 s.71
• /
• pp.151-160
• /
• 2001

본 논문은 댁내통신설비 구축에 필요한 설치 공간과 운용조건에 해당하는 환경 요소들에 대한 체계를 분석하여 정리한 것이다. 댁내통신설비기술의 부문으로서 구조화된 배선시스템이 그 중추를 이루고 있으며, 이에 필요한 광커넥터, 트랜시버 등 핵심 접속 자재, 보호기, 복합 세대단자함 또는 게이트웨이 등이 개발되고 있다. 이에 더하여 댁내통신설비의 근간이 되는 배선시스템을 최적으로 수용하고 운용할 수 있는 공간과 환경이 갖추어져야 한다. 본 논문에서는 이러한 공간과 환경에 대하여 국내외 표준자료와 기술규격 자료, 설치시방서와 연구논문 등을 분석하여 아직 체계적으로 정리되어 있지 않은 공간과 환경 요소들을 분류 정리한 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.425-430
• /
• 2013

Robust and high speed underwater communication is severely limited when compared to communications in terrestial. In free space, RF communication operates over long distances at high data rates. However, the obstacle in seawater is the severe attenuation due to the conducting nature. Acoustic modems are capable of long range communication up to several tens of kilometers, but it has low data-rate, high power consumption and low propagation speed. An alternative means of underwater communication is based on optics, wherein high data rates are possible. In this paper, the characteristics of underwater channel in the range of visible wavelength is investigated. And the possibility of optical wireless communication in underwater is also described. The LED-based transceiver and CMOS sensor module are integrated in the system, and the performance of image transmission was demonstrated.