• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.133-133
• /
• 2012

일반적으로 TiO2는 광촉매 작용으로 표면 살균성을 가지며, 친수특성으로 인한 자가세정 능력도 가지고 있다. 또한 지구상에 많이 존재하는 광물로 원료의 가격이 저렴하다는 장점이 있어 산업 전반에 사용되고 있다. 하지만 외부의 환경적 오염으로 인한 광촉매 반응 면적의 감소에 따라 반응효율이 저하되는 단점이 있으며, SiO2는 투명한 유리와 같이 비정질상태가 안정하고 높은 굴절률을 가지며 내구성이 외부환경에 강해 무반사 코팅이나 금속박막의 보호층으로 주로 사용된다. WO3는 높은 굴절률과 가시광선 영역에서의 우수한 투과율을 가지고 있으나 conduction band에서 생성된 광캐리어들이 빠르게 재결합 하여 광분해 효율이 좋지 않기 때문에 흔히 쓰이지 않고 있다. 이러한 박막들의 단점을 보완하기 위해 물리적 구조를 변화시켜 반응 면적을 극대화하기 위해 버퍼층이나 다층박막을 사용하는 등 다양한 연구가 진행되고 있다. 본 실험에서는 Slide glass에 Plasma etching 하였을때 친수성이 나타나는 특성을 이용하여 대면적 코팅과 표면 경도를 우수하게 만들 수 있는 RF Magnetron sputtering법으로 Slide glass에 Ar Gas 분위기에서 각 파워별 Plasma etching한 후 TiO2, SiO2, WO3 박막을 증착하여 광학적, 구조적 특성을 분석하였다. 광투과율 측정장치(UV-VIS Spectrophotometer)를 사용하여 투과율을 측정한 결과 모든 박막이 가시광 영역에서 80% 이상의 높은 투과율을 나타내었으며, 접촉각 측정결과 100w로 etching한 glass에 TiO2를 증착한 박막에서 가장 낮은 $3^{\circ}$ 이하의 접촉각을 나타내었다. SEM (Scanning Electron Microscope) 분석을 통해 표면구조를 관찰한 결과 100w로 etching한 후 TiO2를 증착한 박막이 가장 조밀한 구조를 보였으며, AFM (Atomic Force MicroScope) 분석 결과 100w로 etching한 후 TiO2를 증착한 박막의 표면이 가장 거칠어지는 것을 볼 수 있었는데, 이는 물과 닿는 박막의 유효 표면적의 증가로 인하여 광촉매 효과가 증가하였기 때문에 친수성이 향상된 것으로 사료된다. 이러한 박막은 건물 유리벽과 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재, 디스플레이 표시장치로 활용할 수 있을 것으로 예상된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.579-584
• /
• 1998

Polymer dispersed liquid crystal(PDLC) composite films were made by polymerization induced phase separation method using UV-curing to investigate the effect of fabrication conditions, such as photoinitiator concentration, film thickness, polymerization temperature, and electric field during polymerization, etc., on the electro-optic properties. As the amount of photoinitiator increased, the driving voltage of PDLC device increased due to the increase of small-size liquid crystal phases. This was considered as the results from the increased interfacial area between liquid crystal (LC) and polymer matrix, since LC molecules at the interfacial regions were relatively difficult to response for the applied electric field. When the higher molecular weight oligomer (PTDA-1000) was used as matrix, the initial transmittance was observed to be relatively higher than that for the lower molecular weight oligomer (PTDA-250). Saturation transmittance for PTDA-1000 was observed at relatively lower voltage than that for PTDA-250, of which transmittance was not saturated even at 60 V. As polymerization temperature increased, the initial transmittance of resulting PDLC film increased due to the larger LC droplets formation and the more matched refractive index between LC and matrix than those cases for the lower polymerization temperature. Though driving voltage decreased for the thinner film, it was considered that optimum thickness of the film should be maintained to get some practical contrast, which is the ratio of off- and on-state transmittance. Furthermore, electro-optic properties such as initial transmittance, driving voltage, and response time were observed to be considerably affected by application of external field during polymerization.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2022

Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 ㎛ PDLC layer photocured at an UV intensity of 1.5 mW/cm² exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 ㎛ capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.135-155
• /
• 2022

This study analyzes patent trends by deriving sub-technical fields of Organic Light-Emitting Diodes (OLEDs) industry, and analyzing technology value, originality, and diversity for each sub-technical field. To collect patent data, a set of international patent classification(IPC) codes related to OLED technology was defined, and OLED-related patents applied from 2005 to 2017 were collected using a set of IPC codes. Then, a large number of collected patent documents were classified into 12 major technologies using the Latent Dirichlet Allocation(LDA) topic model and trends for each technology were investigated. Patents related to touch sensor, module, image processing, and circuit driving showed an increasing trend, but virtual reality and user interface recently decreased, and thin film transistor, fingerprint recognition, and optical film showed a continuous trend. To compare the technological value, the number of forward citations, originality, and diversity of patents included in each technology group were investigated. From the results, image processing, user interface(UI) and user experience(UX), module, and adhesive technology with high number of forward citations, originality and diversity showed relatively high technological value. The results provide useful information in the process of establishing a company's technology strategy.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.92-102
• /
• 2004

(6-Cholesteryloxycarbonylpentoxypropyl)celluloses (CHPCs) with degree of esterification (DE) ranging from 2.25 to 2.91 were synthesized by reacting hydroxypropyl cellulose with 6-cholesteryloxycarbonylpentanoyl chloride. The acrylic esters of CHPCs (CHPCEs) and their photocrosslinked films with liquidcrystalline order were also synthesized. The thermotropic properties of mesophase for both uncrosslinked and crosslinked samples and the swelling behavior of the crosslinked samples in acetone were investigated. The hydroxypropyl cellulose exhibited an enantiotropic cholesteric phas, while all the uncrosslinked cholesterylbearing samples exhibited a monotropic cholesteric phases; the 6-cholesteryloxycarbonylpentanoyl chloride also showed a monotropic smectic phase. The hydroxypropyl cellulose formed a right-handed helix whose optical pitch (λ$\sub$m/) increases with temperature, whereas all the uncrosslinked derivatives farmed left-handed helices whose λ$\sub$m/'s decreased with temperature. The thermal stability of the mesophase and the magnitude of λ$\sub$m/ at the same temperature for both CHPCs and CHPCEs decreased with increasing DE. All the crosslinked samples, in constrast with CHPCEs, did not display reflection colors but exhibited an anisotropic swelling characteristic of crosslinked gel retaining liquid-crystalline order.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.879-884
• /
• 2015

Printed electronics is a technology that produces electronic devices and circuits by printing functional ink on a web, which is a film-like flexible material. This technology is suitable for large-scale and high-speed mass production, and is a next-generation process technology that can fabricate electronic devices from flexible materials. As precise measurement of the positions of the web is required in order to commercialize such a printed electronics process, a measurement system with an optical encoder with a precision of micrometers had been proposed in the preceding research of this study. However, the lateral positions of the web could not be measured in the preceding research as the phenomenon of the entire web being moved in the lateral direction could not be detected. In this study, a measurement system that utilizes the differences in the amount of light reflected from the alignment patterns depending on the web positions in the lateral direction was proposed for measuring the lateral positions of the web. In addition, its reliability was verified and then the effect when measuring printed alignment patterns was analyzed by experiments.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.803-809
• /
• 2012

The non-isothermal crystallization behavior of ethylene-tetrafluoroethylene (ETFE) copolymer was investigated by DSC and imaging FTIR analysis. Modified non-isothermal Avrami analysis was applied to interpret the crystallization behavior of ETFE. It was found that the less linearity in ln[-ln(1-X(t))] vs. ln(t) plot was obtained in thermal analysis comparison with imaging FTIR due to relatively small crystallization enthalpy change in ETFE. It means that imaging FTIR measured by overall IR absorption intensity change due to the crystallization was found to be effective to understand the non-isothermal crystallization kinetics of ETFE. In addition, the optical transmittance of ETFE was studied. The crystallite developed by slow cooling caused the light scattering and resulted in the increase of haze and the lowering of transmittance up to 8%. From our results, it was confirmed that cooling rate is an important processing parameter for maintaining optical transmittance of ETFE as a replacement material for glass.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.393-401
• /
• 2002

Pipelines in power plants, nuclear facilities and chemical industries are often affected by corrosion effects. It is important to inspect the internal defects in pipelines in oder to guarantee safe operational condition. We have taken relatively much time, cost and manpower to use conventional NDT methods because these methods are contact measuring methods. In this paper, we used digital shearography, a laser-based optical method which allows full-field measurement of surface displacement derivatives. This method has many advantages in practical use, such as low sensitivity to environmental noise, simple optical configuration and real time measurement. The experiment was performed with pressure vessels which has different internal cracks and detected internal cracks in the pressure vessels at a real time using phase shifting method.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.308-313
• /
• 2005

The effects of molecular environments on photoisomerization of an azobenzene group were investigated using In-situ UV/Vis spectroscopy and optical anisotropy measurement technique. The reversible and repeatable photoisomeritation reactions of azobenzene were observed by irradiating the film containing 4-hydroxyazobenzene and by measuring absorption intensities of the characteristic bands of trans and cis isomers simultaneously. When the self-assembled monolayer with azobenzene groups was used as an alignment layer for a liquid crystal cell, the homeotropic alignment was induced due to their compact packing structures of azobenfene groups along the vertical direction of the substrate. By irradiating UV light on this cell, the trans-azobenzene groups change to cis-isomers through the photoisonlerieation and then resulting in the planar alignment of liquid crystal molecules.