• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.191-194
• /
• 2002

In optical pick-up, optical components such as objective lens, collimator, mirror, laser diode and photo diode are mounted on the pick-up base. These components must keep their original position during operation for proper transmittance of information from laser diode to optical disk and back to photo diode. However, micro thermal deformation of pick-up base which is induced by thermal environment during operation can deteriorate the performance of optical pick-up. Therefore, it is important to measure and analyze the thermal deformation behavior of pick-up base under thermal environment. In the present study, a measurement system using holographic interferometry was designed to measure micro thermal deformation of pick up base. The measurement system was verified by using the deformation of cantilever with prescribed motion actuated by PZT with 1 nm resolution. Interferometric measurement was compared quantitatively with that induced by PZT actuator. Finally, micro thermal deformation of pick-up base under actual thermal environment was measured using the present holographic interferometry and the results were analysed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.618-621
• /
• 2001

The proposed lever actuator has no friction and mass balance characteristics in motion, which are adapt to high-speed and high-density optical disk system. This paper discussed about the theoretical analysis of the lever structure. The modeling of the lever actuator is found. Using the Newton's method, the motion of equation is deduced through the constraint equations and equilibrium equations in three directions (focusing, tracking and tilting). From the above analysis, we know that the shape of the hinge is the very important parameter on determining the performance of the lever actuator, and the actuator has the 2nd order system characteristics. And the first resonant frequency in transmissibility is dependent to the rigidity of the lever while the first transmissibility resonance of conventional actuators is dependent to the first natural resonance of those actuators. This means that the lever actuator is more stable to the external vibration.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.521-528
• /
• 1996

Recently, higher speed optical disk drives including computer CD-ROM drives tend to be increasingly demanded to read or write the enormous volume of digital data. To this end, both structure and controller designs of the optical pick-ups should be improved concurrently. In this paper, the pick-up during auto-focusing motion is mathematically modelled retaining all its peculiar features. The model turns out a linear time invariant system suitable for a control design namedH${\infty}$ which ensures robust stability in the presence of system uncertainties. Numerical simulations are performed to demonstrate the robustness with appropriate performance specifications being satisfied. In addition, as the implementation issue of it, procedures of temporal discretization as well as model reduction of the controller are also addressed.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.98-103
• /
• 1998

Recently, DVD/CD compatible driver is needed for DVD and CD is widely used as a new optical data restoring device. The optical systems of DVD and CD driver are different because they have different optical feature. If only one objective lens is used, the change of an aperture or a dual focal length of the lens is required. This method, however, increases the number of parts and results in loss of the power of laser light. Hence, we propose a dual lens actuator design that can read DVD and CD respectively. Albeit magnetic spring is important mechanism in the dual lens actuator design, there has not been the systematic approach to design the mechanism in the preceding researches. In this article. the guideway to design magnetic spring is presented by using the qualitative theoretical approach and the finite element analysis.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.314-315
• /
• 2005

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.38-44
• /
• 2000

In this paper, we have been fabricated λ/2 phase plates lot an optical pick-up using a blue violet laser diode by employing proton exchange and wet etching in LiNbO$_{3}$. Their functions and fabrication processes are described in detail. It is established the optimal fabrication conditions through the experimental results. The device characteristics are measured by the Mach-zender interferometer which is composed of the optical components and 632.8nm He-Ne laser. The measured phase error was ＋5$^{\circ}$~ -6$^{\circ}$(within 3%). This phase plate could be applied an useful device to improve the resolution and the stability of the optical pick-up which has a blue violet laser diode as an optical source.

• The Optical Journal
• /
• s.113
• /
• pp.52-53
• /
• 2008

국내 광산업은 80년대 카메라, 복사기 등 결상기기 중심에서 90년대 이후에는 결상기기와 더불어 레이저 가공기, 광정보기기, 광통신기기 등 광응용기기로 확대 되고 있다. 2005년 기준으로 볼 때 국내 광산업은 세계시장의 약 5.5%를 차지했으며, 정밀 광산업 기술로드맵과 직접 관련되는 광정밀기기, 광정보기기, 광학기기분야의 수입은 68%, 수출이 90%를 차지해 수출역점산업임을 알 수 있다. 따라서 2010년에는 광산업 세계 시장규모가 400조원 수준에 이를 것으로 예상되는 가운데 이에 대비하여 국내 광산업의 성장기틀을 다질 때이다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.296-297
• /
• 2003

사회의 정보화가 급속하게 진전됨에 따라 취급해야 할 데이터 양이 증가되면서 정보 저장장치의 고속화, 소형화, 및 대용량화의 필요성이 대두되고 있다. 많은 양의 데이터를 저장하기 위해서는 저장장치의 물리적 디스크 공간이 높은 기록밀도를 가져야 한다. 이를 위한 방법으로 하드디스크 기술과 광자기 디스크 장치(magneto-optical disk drive) 기술을 결합하는 근접장 복합 기록 방법(Near field hybrid recording method)들이 보고 되었다. (중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1102-1106
• /
• 2008

Microfluidics deals with the behavior, precise control and manipulation of fluids at a micro scale. It has become increasingly prevalent in various applications such as biomedical applications (diagnostics, therapeutics, and cell/tissue engineering), inkjet head, and fuel cells etc. The issue of inspection and characterization of microfluidics has emerged as a major consideration in design, fabrication, and detection of microfluidic devices. In this paper, we characterize a diffusion based mixing in Y-microchannel using a fluorescent optical scanner based on a DVD pick-up module, which is widely used in optical storages. Using fluorescent dye, we measure the fluorescent intensity that represents the mixing patterns in Y-microchannel. We also compare these experimental results with computational fluid dynamics (CFD) simulation ones. It is shown that the proposed optical scanner can be used as an alternative measurement system with high performance and cost-effectiveness, compared to conventional optical tools such as epifluorescent microscopes using high resolution CCD camera and confocal microscopes with photomultiplier (PMT) detectors.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.229-234
• /
• 2005

A novel method to measure the interaction movement, focusing direction and tracking direction in an optical pick-up, is proposed and the decoupling control for it is discussed. First, the basic principle of the coupline analysis method using back electromotive farce is introduced. Second, the interaction analysis between focusing direction and tracking direction fur commercial slim type actuator is performed using the proposed method. Finally, the coupling analysis and decoupling control for the slim type optical pick-up are discussed. From the brief simulation, we shows that the effectiveness and validity of the proposed method.