• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.786-790
• /
• 2001

In this paper, we propose an optimum design method for optical pick-up actuators. Using this method, we can design an optimal pick-up actuator having the required tracking/focusing performances. Also, the designed actuator has the small mass, force constant for small size of magnetic circuit and large resistance for reduction of heat generation. Simulation results show that this method can be potentially implemented in all the pick-up actuators.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.109-119
• /
• 2002

In this paper, mechanism design of optical pickup actuator for fast access is proposed. This actuator is composed of moving magnet type actuator and moving coil type actuator for tracking and fine motion, respectively. Moving magnet type tracking actuator is configurated by two permanent magnets and four air-core solenoids. Additional damper by induced current in tracking actuator can reduce the transient vibration between the coarse seeking servo and fine seeking servo. Variable stiffness can be acquired by applying current to air-core solenoid simply. This actuator can achieve fast access by these additional damper and stiffness. Performance of this actuator is predicted through the FEM, simulation and simple experiment. Settling time for transient vibration is reduced to 14.7% according to simulation result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2263-2265
• /
• 2000

본 연구에서는 광 픽업의 소형, 경량 제작을 위해 MEMS 기술을 이용하여 planar micro optics 방법으로 광 픽업을 구성하는 micro lens, actuator, beamsplitter 등을 설계, 제작하고 집적화한 픽업헤드를 구성하여 그 특성을 분석하였다. 특성분석 결과 disk에 focusing 되는 beam의 형상은 circle type의 비교적 양호한 결과를 얻을 수 있었고 beam spot size는 약 22$\mu m$로 실제 system에서 요구되는 0.9$\mu m$이내의 beam spot size에 비해 약 25배 가량 큰 beam spot size를 얻을 수 있었다.

• 광학과기술
• /
• 제1권2호
• /
• pp.17-22
• /
• 1997

• 한국멀티미디어학회논문지
• /
• 제5권2호
• /
• pp.215-221
• /
• 2002

광 디스크 장치에서 고배속 모우드로 언밸런스 디스크가 동작될 경우, 진동으로 인한 포커스 및 트래킹 서보가 불안정해져 데이터 검색 시간 지연 및 불안정 동작을 야기한다. 본 논문에서는 이러한 문제점을 해결할 수 있는 방법을 제안한다. 일반적으로 광 디스크 장치에서 사용되고 있는 3 빔 방식의 광 픽업(Piek-up)의 경우, 면진동이나 편심이 있는 디스크 동작시 메인 빔에 따른 포토 다이오드 상의 광 스폿의 위치도 변화된다. 이러한 특성을 이용하여 언밸런스 디스크 동작시 광픽업의 포토 다이오드 A와 C에 수신되는 광량은 디스크의 언밸런스량에 따라 결정되어진다. 따라서 포토다이오드에 수신되는 A와 C의 광량의 변화를 차동 증폭함으로써 디스크의 언밸런스량 검출이 가능하다. 본 연구에서는 고배속 모우드에서 포커스 및 트래킹 서보의 최소 특성을 분석하고, 디스크의 언밸런스량을 전기적인 신호로 검출하는 방법과 검출된 언밸런스량에 따라 광 픽업의 스핀들 모터(Swindle Motor)의 회전수를 조절함으로써 안정적이고 정확한 데이터 검색이 가능한 하드웨어 및 펌웨어 구조를 제안하였다.

• 소음진동
• /
• 제10권2호
• /
• pp.221-228
• /
• 2000

In this paper, analytical study is performed to reduce residual vibration in seeking mode of optical pick-up. The conditions for acceleration adn deceleration time in trapezoidal velocity profile to reduce residual vibration are derived for undamped vibration system. To verify the validity of conditiosn two example studies are carried out. Numerical and experimental implementations for flexible arm system attached to moving part show that residual vibration is effectively reduced by calculated velocity profile. In addition, simulation study for optical pick-up reveals that by changing natural frequency to resonance frequency the conditions derived assuming undamped system can be applied to obtain velocity profile for minimum residual energy in damped vibration system.

• 한국소음진동공학회논문집
• /
• 제14권1호
• /
• pp.10-16
• /
• 2004

There are a lot of roots of errors in a motion of the optical pick-up actuator being one of the most significantcomponents in a CD-ROM drive. Most of the studios recently performed have a tendency to seek for the causes from an actuator itself. This paper presents dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive linear equations of motion with respect to the rectangular coordinate. We found that the ranges of the natural frequencies of a feeding deck and the actuator are close to each other. The time responses are also computed by the Newmark method and Runge-Kutta method. The result show that it is important effect to consider feeding deck in modeling and designing an optical pick-up.

• 소음진동
• /
• 제8권2호
• /
• pp.346-352
• /
• 1998

This paper presents actuating characteristics of an asymmetric high-speed optical pick-up fine actuator that can be installed in a small area such as a notebook personal computer. In the asymmetric actuator four points (mass center, actuation center, supporting point of wire suspension on a bobbin, and optical axis) are not coincident so that the proposed actuator suspension reveals undesirable suspension resonance in the pitch and yaw direction. Lumped parameter dynamic model in each direction is used to investigate the driving characteristics with respect to relative location of the four points. Some of desired design directions toward reducing resonance peaks are suggested by using sensitivity information. In order to avoid undesirable resonance, at least supporting point on the obbin must be located in the middle of the mass and actuation center of the asymmetric pick-up actuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.92-97
• /
• 2002

There are a lot of roots of errors in an motion of the optical pick-up actuator being one of the most significant components in a CD-ROM drive. Most of the studies recently performed have a tendency to seek for the causes from an actuator itself. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive the linear equations of motion with respect to the rectangular coordinate. We found the fact that the ranges of the natural frequencies of a feeding deck and an actuator are close to each other. And the time responses are also computed by the Newmark method and Runge-Kutta method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.316.2-316
• /
• 2002

There are a lot of roots of errors in the motion of the optical pickup actuator being one of the most significant components in the CD-ROM drive. Most of the studies recently performed have a tendency to seek fur the causes from an actuator itself. We found the fact that the range of the natural frequencies of a feeding deck and an actuator is close each other through an experiment. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. (omitted)