• 전기의세계
• /
• v.45 no.9
• /
• pp.9-17
• /
• 1996

1970년 미국의 코닝글라스사(Corning Glass Company)에서 광섬유가 최초로 제조된 이래 광섬유는 통신분야에 많은 공헌을 해오고 있다. 1976년 Kinsley, Davies 등에 의해 광섬유를 이용한 전기적 위상변이 효과가 발표된 이후로 광섬유 특성을 이용한 센서연구가 많이 진행되어 왔다. 즉, 광파이버의 실현과 반도체 레이저와 발광 및 수광 다이오드의 성능 향상에 의하여 광파이버 응용 계측 기술이 현저하게 진보하여 그 다양성과 실현성도 두드러지게 증가되었다. 이것은 레이저와 수광소자 등의 광소자의 개발, 마이크로컴퓨터를 비롯한 전자기술의 진보, 또한 최근의 전력 계통과 철강, 석유 화학 등의 각종 공업 플랜트의 대규모화, 고도화에 따른 고품위의 계측 제어시스템에 대한 수용의 증대에 의한 것이다. 이에 따라서 광대역, 저손실, 고절연성, 내잡음성, 안전방폭성 등이 우수한 광파이버를 신경망으로 하는 광파이버 응용 계측 제어 시스템이 공장자동화에 있어서 중요한 역할을 담당하게 될 것이다. 이의 설계와 제어를 위해 가장 중요한 부분은 정보 수집을 하는 센서 즉, 광속도, 회전 각속도 등 많은 종류의 광섬유 센서의 연구 개발이 미국, 일본, 유럽 및 국내의 여러 기관에서도 게속적인 연구가 진행되고 있으며, 부분적으로 서서히 실용화되어 가고 있다[3-4].

• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.77-81
• /
• 2008

In this paper, we introduce a multi purpose environmental monitoring system developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensor. The monitoring system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored, in each of which three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation, and to clarify temperature influences to the system in terms of the coupling of optical connectors and the OTDR stability. The pseudo-cracking experiment successfully observed the actually given cracks by means of calculation based on the detected displacement values and their geometrical arrangement of the used sensor modules. And the robustness to the temperature is verified in the various temperature change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.721-725
• /
• 2007

A fiber optic based weight sensor has fabricated using a fiber Bragg grating with a weight sensitive. The sensing concept exploits the inherent characteristics of the FBG and is based on the strain effect induced in the fiber Bragg grating through. A direct indication of the weight level is given by the shift of the Bragg wavelength caused by the expansion of the sensing material. A FBG behaves like a spectral filter which has inherent characteristics that render it very sensitive to strain and temperature. The sensing principle is also based on the strain effect induced in the FBG through the caused by the weight. The experimental setup used for the initial investigation to characterize the mass response of the sensor. The transmitted signal from the sensor was monitored using an optical spectrum analyzer with a resolution bandwidth of 0.4nm. In this paper, we presented the spectral characterization and shaping of FBG by scanning a mass element that affects a small grating fraction at a time, without permanent effects on the optical fiber when the various wavelength and strain is removed. That is, destruction when the optical fiber for weight is physically damaged.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.283-286
• /
• 2002

In fiber optic sensor, the error of the measurement is influenced by the surface roughness of the target and surroundings, especially the outside light. To reduce or modify this error, the sensitivity of the fiber optic sensor and the noise change by the surface roughness of the target should be known. The purpose of this paper is to observe the sensitivity of the fiber optic sensor and the noise according to the surface roughness of the target.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.478-481
• /
• 1995

This paper presents the system demonstrator for an optical fiber sensor system developed as a technological evaluator suitable for generic sensric sensing applications. The new type of fiber-optic sensor employed a diaphragm displacement transforms pressure into optical intensity. Form this sensing technique, we can know the variation of source intensity, the loss of a optical fiber, and the reflectivity of the diaphragm surface. Experimental results are applied to the low-pressure transducer suitable for measuring miniature pressure.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.131-136
• /
• 2003

Five expensive sensors are necessary to control a magnetic bearing system. The sensor price rate of magnetic bearing system is high. So it is necessary that cheap and good sensor is developed. The optical fiber displacement sensor is adaptive to satisfy this condition. We can design magnetically suspended spindle based on static characteristic of optical fiber displacement sensor developed. The controller can be designed by decoupled feedback PD. Therefore, it is simpler than any other controller comparatively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.401-408
• /
• 2019

The objective of this study is to develop a new type of buried sensor module that can directly assess pre-stressed concrete by measuring strain using a hetero-core optical fiber sensor. In this regard, experiments were conducted to evaluate the performance of the sensor using an exposure sensor module. Based on the experimental results, when the values of the displacement control velocity were 0.12 mm/min and 1.80 mm/min, the corresponding delays in the measurement were 52.1 s and 2.6 s respectively, which indicated that the maximum delay between the two measurements was a factor of 19. Due to the measurement delay phenomena, the sensor module used in the experiments cannot be employed to check the real-time state of the structure. Thus, additional experiments were needed to develop a new sensor module that can measure the real-time state of the structure. To investigate the cause of the measurement delay phenomena, three experiments were conducted. It was confirmed that measurement delay is mainly attributed to frictional resistance. The measurement delay phenomena were not observed in the experiments using the friction-removed device.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.191-198
• /
• 2001

In order to comprise a basic closed-loop control system for hydraulic systems it is necessary to detect the piston rod stroke of a hydraulic cylinder. There are many conventional type sensors which can detect the displacement of cylinders. However, they cannot reveal the original performance normally or they cannot be applied at all where the operating circumstance of cylinders is beyond specifications of sensors. Especially, for the purpose of detecting the strokes of cylinders mounted on heavy equipments, a special exclusive sensor must be used because the operating circumstances of heavy equipments are so severe that general purpose sensors cannot endure such circumstance as shock and a residual vibration induced by rough works. In this paper, an exclusive method for detecting the piston rod stroke for heavy equipments is suggested, which adopts a remote detecting technique using optical fiber sensors. Several experiments using the prototype are executed for verifying the effectiveness of the suggested method and the possibility of the accurate detection of stroke.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.305-305
• /
• 2011

표면 플라즈몬 공진(SPR) 현상을 이용한 광섬유 센서는 SPR 센서의 우수한 표면 민감도, 비표지 검출능 등의 특징은 유지하면서 측정시스템이 단순해지고 저렴하게 제작이 가능하며 원거리 검출에 유리하다는 장점으로 많은 연구가 진행되고 있다. 최근 스택 제어가 용이하고 민감도 또한 우수하다는 이유로 측면 연마형 센서 구조를 적용한 연구가 많이 이루어지고 있다. 본 연구에서는 기존 Kretchman형태의 SPR 센서의 분해능 향상을 위해 사용된 광도파로 구조를 측면 연마형 광파이버에 적용시켰다. 금속 층 / 유전체 층 / 금속 층으로 구성되어 있는 광도파로 구조와 Au 단일 층을 사용한 기존 구조에 대한 이론 전사모사를 진행하고 실물 소자를 제작하여 특성을 평가하였다. WCSPR 센서에서는 두 개의 반사율 dips이 나타난다. 하나는 단파장영역에서 나타나는 폭이 작은 형태이며 또 다른 하나는 장파장영역에서 나타나는 폭이 넓은 형태이다. 단파장에서의 dip은 입사각에 크게 영향을 받지 않기 때문에 Wavelength interrogation mode을 이용하는 광섬유 SPR센서에 적용할 경우 분해능이 향상될 것 이다. WCSPR 센서는 도파로의 유전체층에서 진행되는 모드를 이용하면 Self-referencing을 할 수 있다, 또한 유전체 층의 두께를 변화 시켜 중심파장의 위치를 조절할 수 있는 특징을 갖고 있다. 결과적으로 광도파로 구조를 광파이버에 적용시켜 기존 Au 단일 층 구조의 SPR 센서에 비해 좀 더 정확하고 광범위한 감지를 할 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.259-266
• /
• 2018

This is the study for developing the hetero-core optical fiber sensors which are purpose to measure the prestress of PSC bridges during the life cycle period. The goal of this study is to improve the resolution of hetero-core sensors. As a result of the test, it is possible to measure the displacement in $2{\mu}m$ increments. In other words, if the length of the sensor module is 30cm, it is possible to measure the prestress variations in 0.2MPa increments at specified compressive strength of concrete(fck) of 40MPa by Hook's Law. So it can be useful for development of a sensor module measuring internal prestress measurement.