• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1481-1488
• /
• 1995

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of IIR lattice structure, which uses coherent light sources and consists of directional couplers whose coupling coefficients are restricted between 0 and 1. Considering restrictions of directional coupler, the design formulae and condition for realibility of optical fiber filter of IIR lattice structure which makes the optimal use of optical signal energy are derived.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.666-671
• /
• 2007

차세대 무선망의 인프라 구조로써 현재 광가입자망에 적용되고 있는 EPON의 사용을 제안하였다. 제안된 구조는 광파이버 설치비용을 크게 줄일 수 있고, 그룹 셀 개념을 도입하여 핸드오버 지연시간의 주 발생원인 3계층 핸드오버의 발생 횟수를 대폭 줄일 수 있다. 본 연구에서는 EPON의 특성을 활용한 2계층 Fast 핸드오버 알고리즘을 제안하였고, 이 때 핸드오버에 큰 영향을 미치는 제어신호의 지연시간을 시뮬레이션을 통해 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1746-1749
• /
• 1997

A distributed optical fiber temperature sensor can continually monitor the measurand at every point along of its fiber length. It is based on OTDR technics which used extreamlly weak backward scattered light called Raman scattering. When the Pulsed high intensity laser light injected into the optical fiber there are several kind of backscattered light such as Rayleigh, Stokes, and anti-Stokes, etc. caused by impurities molecular vibrations. The temperature distribution is derived form the intensity ratio Raman scatted light-Stokes versus anti-Stokes-and the time function between light injection and signal detection. It is shown that the priniciple of distributed sensing, the system desing, and the result of experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.631-634
• /
• 2005

This paper has been studied a optical fiber sensor offer important advantages such as electrically passive operation, EMI immunity, high sensitivity, and multi-plexing capabilities of this technology has been the characteristic. The shift in optical fiber Bragg wavelength with mass can be expressed. Using the shift in the optical fiber Bragg grating(FBG) center wavelength due to mass change.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.124-126
• /
• 1996

In this paper, the driving systems of the Fiber Optic Gyrocompass absolutely required a constant speed and a precise position control with fine step angle, are presented. One of the proposed systems is a stepping motor system with microstep driver, another one is a DC servo motor. Experimental results indicate that a low cost and simple FOG driving system using a stepping motor is capable of a satisfactory operation.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1386-1392
• /
• 2009

An analysis is presented for super-high-speed optical demodulation by an avalanche photodiode(APD) with electric mixing. A normalized gain is defined to evaluate the performance of the optical mixing detection. Unlike previous work, we include the effect of the nonlinear variation of the APD capacitance with bias voltage as well as the effect of parasitic and amplifier input capacitance. As a results, the normalized gain is dependent on the signal frequency and the frequency difference between the signal and the local oscillator frequency. However, the current through the equivalent resistance of the APD is almost independent of signal frequency. The mixing output is mainly attributed to the nonlinearity of the multiplication factor. We show also that there is an optimal local oscillator voltage at which the normalized gain is maximized for a given avalanche photodiode.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1095-1099
• /
• 2002

본 논문은 1064 m의 Q-스위칭 Nd:YAG로 펌핑된 단일통과 라만레이저에서 nano-초의 스토크스 펄스발생에 관한 연구이며, 라만 매질로는 GeO2로 도핑된 grad index형 다중모드 파이버 220 m를 사용하였다. 실험 결과에서 펌핑 에너지의 변화에 따라 1.5∼2.7 nano 초의 펄스폭을 갖는 스토크스 펄스 트래인 싱분이 효율적으로 발생함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.66-70
• /
• 1993

미세드릴가공은 드릴 직경의 소경화로 발생하는 공구강성저하, 지동 발생, 칩배출 곤란 등으로 인해 수많은 기계가공 중에서도 가장 어려운 가공 중의 하나이며 이로인해 설계의 단계에서 가능한 피하고있는 실정이다. 그러나 근래 각종 제품의 소형 경량화 추세가 일어나면서 미세구멍가공 기술에 대한 중요성이 높아지고 있으며, 특히 시계부품, 소형 정밀 부품, 연료분사용 노즐, 광파이버 관련품, 우주항공기 부품 등에 수요가 급증하고 있다. 또한 최근 전기.전자 공업의 발달과 함께 등장한 표면실장기술(SMT)은 프린터 배선기판의 고밀도화를 더욱 진전시켰으며 이는 구멍밀도, 구멍지름의 미소화 등 미세구멍가공 관점에서 보완해야 할 기술적인 과제를 남겨 놓았다. 본 연구는 미세드릴가공의 메카니즘을 규명하고 그 문제점을 해결하여 미소경 드릴링 머신을 개발하는 데 주력함과 동시에그 절삭현상의 기초적인 연구를 수행하였다

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.75-81
• /
• 2001

MCVD(modified chemical vapor deposition) used in making optical-fiber currently utilizes the hydrogen-oxygen burner as a energy supply source. To improve the productivity and to reduce the manufacturing cost of optical-fiber, a natural gas-oxygen burner has been developed. The manufacturing processes of optical-fiber consist of vapor deposition, collapse and drawing processes. Among these processes, the vapor deposition and the collapse processes are important in terms of improving the productivity and saving the production cost. The vapor deposition and collapse processes are performed by combustion heat and flame force supplied by a burner. So the flame force of the burner used in these processes is required to have an optimal and consistent value in order to allow uniform heating and collapse of quartz tube. In this regard, the momentum ratio of natural gas and oxygen has been optimally determined by modification of a burner and the inlet flow pass also has been modified.