• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.90-99
• /
• 1994

Picosecond time-correlated single photon counting system and time-resolved luminescence spectrometer were constructed, employing a mode-locked picosecond laser, fast electronics, and microchannel plate tube. It has been shown that the instrument response function critically depends on laser pulse shape, timing jitter and walk of the electronics, and characteristics of detector and amplifier. Correcting time dispersion in the optical system, the best instrument response function obtained appears to be 25 ps, which made it possible to measure the luminescence lifetime with less than 10 ps resolution in the picosecond to microsecond range. range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.113-113
• /
• 2006

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.362-368
• /
• 1997

The remote real-time uranium concentration analysis using nitrogen laser, optode, photomultiplier and optical fiber is studied. The optode for the remote collection of uranium fluorescence is designed. The fluorescence intensity at time zero is calculated in order to exclude the quenching effect and the temperature fluctuation and used for more precise estimation. The fluorescence change is very sensitive to the uranium concentration change. The method shows the detection limit of 0.06ppm and the linearity between 0.1ppm and 2ppm of the aqueous uranium concentration.

• 전기의세계
• /
• v.29 no.7
• /
• pp.455-459
• /
• 1980

The gain change of the photomultiplier which occurs as the count rate increased was examined. and simple feedback resistor series was introduced between 7th and 9th dynode for compensating the gain change. The effect of the feedback resistor series was considerably good to reduce the gain change. With the feedback resistor, the gain change was only 1.9%, when count rate was increased from 514 CPS (counts per second) to 1250 CPS. Without the feedback resister, the gain change was 6.9%, when the count rate was increased from 530 CPS to 1250 CPS.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.250-251
• /
• 2011

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.9-14
• /
• 2005

The nature of the signals collected by an SEM(Scanning Electron Microscope) in order to form images are all dependent on the detector used to collect them, and the quality of an acquired image is strongly influenced by detector performance. Therefore, the development of detector with high performance is very important in pulling up the resolution of SEM This study presents the secondary electron detector for use in scanning electron microscope, electric circuit and I/V conversion circuit for driving that detector.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.191-191
• /
• 2000

마이크로파 절연파괴(breakdown) 및 ECR 플라즈마를 발생시키기 위해 2.45 GHz 마그네트론을 사용하여 간편한 마이크로파 발생장치를 제작하였다. 이 장치는 KAIST-토카막에서 고온 플라즈마를 발생시킬 때 재현성이 좋은 플라즈마를 얻기 위해서 전 이온화하는데 이용된다. 장치에 사용한 마그네트론은 LG 전자의 2M213이고 출력 500W, 주파수 2.45GHz이며, 가정용 전자오븐에 사용된다. 기존의 가정용 마그네트론은 음극(cathode)과 양극(anode)사이에 걸리는 고전압이 60Hz의 주기를 갖기 때문에 약 16ms 마다 8ms동안만 주기적으로 초고주파를 발생한다. 이 마그네트론을 사용하여 연속적으로 발생되는 마이크로파를 얻기 위해서 음극과 양극사이에 개량된 회로로 리플전압이 작은 DC 고전압(5kV, 1A)을 인가하였다. 본 연구에서는 주기적으로 생성.소멸하는 ECR 프라즈마와 연속적인 ECR 플라즈마를 발생시켜 랑뮈어탐침과 광증배관(PMT)을 이용한 H$\alpha$ 방출(emission)을 측정하여 마이크로파 발생장치의 특성을 조사하였다.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.16-20
• /
• 2010

In this study, we have fabricated a fiber-optic dosimeter using an organic scintillator and a plastic optical fiber. The dosimeter measure skin dose and percentage depth dose in a build-up region for an incident high energy photon beam. The scintillating light generated in the organic sensor probe embedded in a solid water phantom is guided by 30 m plastic optical fiber to a light-measuring device such as a PMT or an electrometer. In addition, using a fiber-optic dosimeter or a GAFCHROMIC EBT film, skin dose and percentage depth dose in the build-up region are measured and compared.

• Journal of Radiation Protection and Research
• /
• v.29 no.4
• /
• pp.257-261
• /
• 2004

A coded-aperture gamma camera was developed to increase the sensitivity of a pin hole camera made with a pixellated CsI(Tl) scintillator and a position-sensitive photomultiplier tube. The modified round-hole uniformly redundant array of pixel size $13{\times}11$ was chosen as a coded mask considering the detector spatial resolution. The performance of the coded-aperture camera was compared with the pin hole camera using various forms of Tc-99m source to see the improvement of signal-to-noise ratio or the improvement of the sensitivity. The image quality is much improved despite of a slight degradation of the spatial resolution. Though the camera and the test were made for low energy case, but the concept of the coded-aperture gamma camera could be effectively used for the radioactive environmental monitoring and other applications.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.290-295
• /
• 2000

In order to utilize as a pre-ionization means for reproducible ohmic plasma on KAIST-TOKAMAK, a simple, safe, economical and continuous microwave source has been developed using a home kitchen micro-wave oven. The magnetron used in the study can provide 500 W of power at 2.45 GHz. A conventional magnetron in a home kitchen microwave oven generates microwave for 8 ms at every 16 ms periodically due to the periodic (60 Hz) high voltage applied to the magnetron cathode. In order to generate continuous microwave which is suitable for tokamak pre-ionization, the magnetron operation circuit has been modified using a DC high voltage (5 kV, 1 A) power supply. It provides high-voltage with small ripple for magnetron cathode bias. Using the developed magnetron system, electron cyclotron resonace heated (ECH) plasmas were produced and the characteristics of the system were studied by diagnosing the ECH plasma using Langmuir probe and $H_{\alpha}$ emission diagnostics.