• Clean Technology
• /
• v.4 no.2
• /
• pp.11-22
• /
• 1998

The photo-sensitized oxidation of benzene in water was investigated under various reaction conditions using persulfate, sulfate, nitrate, nitrite and chloride ions as sensitizers. Persulfate ion was proved to be the most effective sensitizer, while sulfate and nitrite could not play any sensitizing role on the benzene photooxidation. When exited together with other ions, the nitrite ion inhibited the photooxidation of benzene by quenching the produced hydroxyl radicals.

• Journal of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.417-422
• /
• 1978

Rather than undergo photooxygenation, the Z-configuration benzalpyrrolinones (Z-2, Z-4) photoisomerized to the E-configuration isomers under direct or sensitized irradiation. Rose bengal sensitized photochemical stereoisomerzation of benzalpyrrolinones (Z-2, Z-4 and E-2) with monochromatic light (at 557 nm, excitation of rose bengal only) showed that the triplet of benzalpyrrolinones was involved in the photoisomerization, since oxygen inhibited the photoisomerization.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.117-122
• /
• 2005

The aim of this study was to evaluate the effect of tertiary amine photo-accelerator on the dental properties of visible light-activated, polymeric, dental restorative composites (PDRC) through the measurement of mechanical and esthetic properties. The surface of barium silicate was hydrophobically treated to improve the interfacial behavior with the acrylic resin matrix. Camphorquinone was adopted as a photo-initiator with 0.5 wt% based on the resin matrix. It was discovered that the dental properties of PDRC were primarily dependent on the chemical structure rather than the added content of photo-accelerator.

• Polymer Science and Technology
• /
• v.19 no.2
• /
• pp.138-145
• /
• 2008

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.213-217
• /
• 1983

Devices that mimic the natural photosynthetic pathway are of considerable interest as fuel sources. Quantum yield of viologen radical formation in several water-in-oil microemulsion system were measured. The yield of hexadecylviologen radical formation in microemulsion system using EDTA as an electron donor, ruthenium bipyridinium complex as photosensitizer, and hexadecylviologen as an electron acceptor was 12%. When benzylnicotinamide was inserted in the interface of the microemulsion and azo compound was dissolved in oil face, the quantum yield of hydroazo compound was 0.16. Organic dye (Rose bengal) was used as photosensitizer for the photoinduced electron transfer reaction. In anionic microemulsion no electrontransfer was observed.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.3-10
• /
• 1999

Kinetics of solution photopolymerization of acrylonitrile(AN) with sensitizer, such as $NaSCN,\;KSCN,\;Ba(SCN)_2,\;NH_4SCN,\;ZnCl_2$ and $Na_2SeO_3$, were studied using UV crosslinker at various monomer concentrations($1.8{\sim}7.58mo1/1$), sensitizer concentrations($10{\sim}60%$), reaction temperature($10{\sim}70^{\circ}C$), energy intensities($1,000{\sim}9,900{\mu}J/cm^2$) at isothermal condition under nitrogen atmosphere. Under the irradiation of high pressure mercury lamp(${\lambda}=365nm$). High conversion and uniform molecular weight were obtained compare to thermal polymerization at reaction temperature of $50^{\circ}C$, reaction time of 3hr and 50% NaSCN without any initiator. Their kinetic model was as follows : $R_p=0.0142[M]^{0.82}[I]^{0.49}[S]^{0.52}$ exp(-1.33/RT).

• Transactions of the Korean hydrogen and new energy society
• /
• v.2 no.1
• /
• pp.7-13
• /
• 1990

We are interested in studying the artificial photolysis of water which mimics the natural plant photosynthesis. In the artificial system there should be a proper photosensitizer, electron donor and electron acceptor. Since Mn-tetramer is known to be the essential part for the oxygten-evolving system in the natural photosynthesis, it is important to know or study the reactivity of Mn-porphyrins. As a model for the Mn-tetramer in the natural photosynthesis, we prepared the lipophilic and hydrophilic Mn-porphyrins. For the lipophilic porphyrin with long hydrocarbon chain, the long hydrocarbon chain was inserted in the porphyrin ring formation step. For the hydrophilic porphyrin, the porphyrin was sulfonated with sulfuric acid. These syntheses of lipophilic and hydrophilic Mn-porphyrins are significant, since the behaviors of these compounds will be different in the microemulsions or vesicles. We also found that the Mn-porphyrins were photoreduced in the microemulsion and water in the presence of amines.

• The Korean Journal of Mycology
• /
• v.15 no.4
• /
• pp.224-230
• /
• 1987

Effects Of organic compound, photosensitizer and $K^+$ ion influx. On the light-induced ATPase of mitochondria in L. edodes purified by linear sucrose density gradient centrifugation were studied. The mitochondrial ATPase activity was investigated by various wavelength illumination at dark state. The mitochondrial ATPase was activated 139% and 128% by 10m mol dithiothreitol and 0.1m mol quinacrine, respectively. This enzyme also was activated 36% by 0.1m mol phenazine methosulfate as photosensitizer. But, 100 mg oligomycin and 1m mol phlorizin inhibited activity of enzyme to 48% and 45%, respectively. Its optimum wavelength was 690 nm on the effect of $K^+$ ion influx, its optimum pH and temperature were found to be 7.2 and $55^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.172-178
• /
• 1992

The graft copolymerization of acrylonitrile(AN) onto chitosan film by using $F^{3+}(FeCl_3{\cdot}6H_2O)$ as a photosensitizer in an aqueous medium was carried out under ultraviolet(UV) irradiation. The grafted copolymer was identified by using IR spectroscopy and scanning electron microscope. The effects of various polymerization parameters involving monomer concentration, photosensitizer concentration, polymerization time and polymerization temperature were investigated. As monomer concentration and photosensitizer concentration were increased, the percent grafting was increased up to limiting value. And also the percent grafting was found to increase by increasing the polymerization time and temperature.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.209-218
• /
• 2013

Purpose: The purpose of this study was to know the availability of two photosensitizers, PD, DA, as a photosensitizer instead of CQ in UDMA dental composite resin. We want to know photopolymerization effect of UDMA unfilled resin and surface hardness of composite resin containing PD and DA were compared with those of CQ, most widely used photosensitizer for dental composite resins. Methods: The photopolymerization effect of UDMA studied by FT-IR spectroscopy increased with irradiation time and the amount of photosensitizer. Knoop hardness of experimental composite resins prepared by the addition of the photosensitizer content and irradiation time. Results: The relative photopolymerization effect of UDMA increased in the order of PD > CQ > DA. The composite resin of UDMA containing DA or PD, which shows better Knoop hardness than that containing CQ. Conclusion: PD and DA show as effective photosensizers, suitable for UDMA dental composite resin compare with a higher efficiency than CQ.