• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.20-21
• /
• 2002

결맞는 두 개의 레이저 즉 결합광과 조사광을 이용하고 라만 공진 조건을 만족할 때, 특별한 조건하에서 조사광의 흡수가 급격히 줄어드는 검은공진(dark resonance)현상이 일어난다. 이러한 현상은 굴절률 변천에 기인하여 밀도반전없는 레이저 등 비선형 광학과 고분해 분광학, 양자광학 등 많은 분야에 응용되고 있다. (중략)

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.19-25
• /
• 2014

In this study, we analyzed the growth characteristics of red lettuce under Light-emitting diode (LED) light environment as well as the change of vitamin C and anthocyanins of lettuce. We made five monochromatic light treatments (red 647 nm, 622 nm, blue 463 nm, 450 nm, White), six mixed red (R) and blue (B) light treatments (R : B = 9 : 1, 8 : 2, 7 : 3, 6 : 4, 5 : 5) and red + white, and three light treatments made according to photoperiod of LED with lighting sources ratio of red : blue (R : B = 8 : 2(18/06 h, 15/09 h, 12/12 h)). It was composed of totally 14 control beds. As a result, the red lettuce the most developed leaf height, leaf numbers and fresh weight under red single light, root length and leaf developed when grown under blue single light. Therefore, red light were related to above part of the lettuce, blue light were related to the growth of the underground part of lettuce. Case of the mixed light, leaf height, leaf numbers, fresh/dry weight of above and underground part were highest red + white light and root length and chlorophyll content were highest under red 7 : 3 blue light. Result of growing investigation by photoperiod, the red lettuce were considered to be most effective in 15/09 h (on/off). The content of anthocyanins; the single light source, mixed light and light irradiation period were highest under blue light (463 nm), red 7 : 3 blue and 18/06 h (on/off) light irradiation, respectively. The vitamin C showed the lowest content of $1.26mg{\cdot}L^{-1}$ under the white light, but showed the greatest content of $3.02mg{\cdot}L^{-1}$ for the control group.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

In this paper, with analysis of the public facilities using solar panel, typical bus shelters are investigated. The present status of these facilities in the field of structural design, the meaning of the bus shelters in the part of structural engineering and domestic and foreign examples are analysed. Finally, we indicate some problems in the domestic bus shelters using solar panel and suggest new ideas.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.13-19
• /
• 1998

In the dye sensitization for the solar energy conversion with a photoelectrochemical cell containing allylthiourea, the time profile of the sensitized photocurrent showed a rise and fall with the irradiation time. The dye solution before and after irradiation was analyzed by means of spectroscopic methods. A new precipitation reaction between sensitizer and supersensitizer and photobleaching of the dye appeared to be involved in the decreased photocurrent.

• The Journal of Natural Sciences
• /
• v.12 no.1
• /
• pp.49-59
• /
• 2002

Exponential decrease of saturation absorption signal was reported in pump beam spacially keeping off from probe beam. Optimum angle between pump beam and probe beam in the differential-velocity-selective saturation absorption spectroscopy was computed theoretically, $1.33^{\circ}$ in cesium atoms and $1.08^{\circ}$ in Rb 87 atoms, and was good agreement with the experimental results.

• The Korean Journal of Pesticide Science
• /
• v.3 no.3
• /
• pp.20-26
• /
• 1999

This study was to investigate the potential degradation of a herbicide paraquat by Fenton reagents(ferric ion and hydrogen peroxide) under UV light irradiation(365 nm) in an aqueous solution. When $10{\sim}500$ mg/L of paraquat was reacted with either ferric ion or hydrogen peroxide in the dark or under UV light, no degradation was occurred. However, the simultaneous application of both ferric ion(0.8 mM) and hydrogen peroxide(0.140 M) in paraquat solution(500 mg/L) caused dramatic degradation of paraquat both in the dark (approximately 78%) and under UV light(approximately 90%). The reaction approached an equilibrium state in 10 hours. In the dark, when $0.2{\sim}0.8$ mM ferric ion was added, $20{\sim}70%$ paraquat of $10{\sim}500$ mg/L was degraded, regardless of hydrogen peroxide concentrations($0.035{\sim}0.140$ M), while under UV light, 95% of 10 and 100 mg/L paraquat was degraded regardless of ferric ion and hydrogen peroxide concentrations. At paraquat concentration of 200 and 500 mg/L, paraquat degradation increased with increasing ferric ion concentrations as in the dark. However the increase in hydrogen peroxide concentration did not affect the extent of paraquat degradation. The initial reaction rate constants(k) for paraquat degradation ranged from 0.0004 to 0.0314, and 0.0023 to 0.0367 in the dark and under UV light, respectively. The initial reaction rate constant increased in proportion to the increase in ferric ion concentration in both conditions. The half-lives of paraquat degradation(t1/2) were 20 - 1,980 and 19 - 303 minutes in the dark and under UV light, respectively. This study indicates that Fenton reagents under UV light irradiation are more potent than in the dark in terms of herbicide paraquat degradation in an aqueous solution.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.33-41
• /
• 2013

In this paper, a photovoltaic switch is suggested that is operated by solar module, a substitute for CdS(Cadmium Sulfide) of most existing automatic switches and thus is powered by its renewably charged battery, and its usability is investigated through various experiments. At first the characteristics of CdS and the operation principle of the existing automatic switch are investigated, and then the characteristics of solar module are examined. These preparatory research shows the possibility of substitution of solar module instead of CdS in light activated switch. Secondly the suggested photovoltaic switch's circuit is designed, implemented and then its experimental comparison data shows the possibility for the replacement of the existing switch to the suggested switch, and furthermore its superiorities.

• The Korean Journal of Mycology
• /
• v.17 no.4
• /
• pp.189-193
• /
• 1989

Ganoderma lucidum formed uniquely non-basidiocarpous basidiospore (NBB) from the aerial mycelia on agar media without the normal basidiocarps. Light was necessary for NBB formation. Best sporulation was obtained at the periodic exposure of 16 hour light and 8 hour darkness for more than 8 days. Effective wave length was blue and yellow but non sporulation was induced by near U.V. light. Effective light intensity for NBB bearing appeared to be about 1,000 Lux as white light. Photomorphogenetic responses in Ganoderma lucidum were clearly different among strains of the fungus.

• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.125-128
• /
• 2015

We found about cultivation light environment conditions of Neolentinus lepideus. For the high quality of N. lepideus, lights-out was useful. In the lights-out, the diameter of pileus of N. lepideus was smaller, and the length and the thickness of stipes were longer and larger than in that of lighting. At the LED effect, the orange and red LEDs prolonged the cultivation period in N. lepideus. The yields of N. lepideus under the white, blue and green LEDs were higher, and the number of available stipes of N. lepideus under the white and blue LEDs was higher than that of other LEDs. The diameter of pileus of N. lepideus under the white, blue and green LEDs was higher, and the length and the thickness of stipes under the orange and red LEDs was higher than those of other LEDs.