• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.427-431
• /
• 2002

Lateral roots of soybean sprout might reduce the quality. The study was done to measure the effect of light quality treated during 24 hour imbibition or 6 day culture on growth and development of soybean sprouts on the 6th day after culture. With the soybean seeds imbibed in 4 ppm benzyladenopurine (BA) solution for last 6 hours of the imbibition, blue and red lights were treated during the imbibition, but during 6 day culture, blue and red or far-red light treatments were done for 50 minutes or 5 hours a day, respectively, the periods taking for their cotyledons to turn green color, On the 6th day after culture, the soybean sprouts were classified by 4 categories on the base of hypocotyl length;＞7cm, 4 to 7cm, ＜4cm and non-germination, and their lateral roots, hypocotyl diameters and fraction dry weights were measured. Blue and red lights treated during the imbibition completely blocked lateral root formation regardless of the lights treated during the culture, and showed nearly the same rate of hypocotyls of longer than 4cm. The period of each light treatment forced during the culture did not influence the growth of soybean sprouts. far-red light treated for 5 hours everyday, however, had the least rate of seed germination and hypocotyls of longer than 7cm of the light quality treatments. In addition, red and far-red lights almost equally having the commercial soybean sprouts of longer than 4cm hypocotyls move elongated and selenderized than blue light and dark treatment, meaning the growth and morphology of soybean sprouts was affected by light treatments during the culture.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.1
• /
• pp.71-75
• /
• 2000

To clarify the possibility of plant production under red, green. blue, and red+blue using light emitting diodes (LEDs) and fluorescent lamps (control), the effects of light quality on the growth and morphogenesis of in vitro seedlings in Piatycodon grandiflorum were examined. The plantlets grown under the LEDs resulted in taller plants with greater stem than fluorescent lamps. The shortest shoot length, 3.8 cm, was observed in the control and the longest one, 13.4 cm, in the red light. But the shoot length was 5.6 cm under red LED with supplemental blue(red+blue light). This results indicate that red LED may be suitable, in proper combination with other wavelengths of light. The root length under red light was significantly smaller among the treatments. The plantlets grown under red+blue light had lower shoot dry weight, higher dry matter than other lights-grown plantlets. Among the various growth parameters measered, there was an indication that leaf area was controlled by the LEDs. Leaf area of a plantlets developing under green light was about 2.4 times wider than that of plantlets grown under red LED (10.1 $\textrm{cm}^2$ in area). The dry matter rate per plantlet among the treatments was greater in plantlets grown under the red/blue LEDs in comparison with that grown under other LEDs. Chlorophyll contents in plantlets grown under the red, green, blue and red/blue LEDs were 2%, 7% 20% and 10% lower, respectively, than those in plant grown under fluorescent lamps.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.671-679
• /
• 2004

The purpose of this study was to develop a practical caries activity test by fluorescence using laser, plasma light and halogen light. The subjects of study were 45 children of 7-8 years old Argon laser, plasma light and halogen light were irradiated to buccal or labial surface of all teeth. Fluorescence of initial carious lesion from teeth was observed through barrier filter and the number of teeth showing lesion was counted. Visual examination for the dDfFtT, mutans streptococci screening test and Lactobacilli colony counting were also done. Data analysis was accomplished by Axelsson's method. The result from the present study can be summarized as follows. 1. Laser, plasma light and halogen light could detect the initial carious lesions better than visual examination(p<0.05). 2. There was positive correlation between laser(r=0.42), plasma light(r=0.41), halogen light(r=0.39) and dBfFtT rate(p<0.01). 3. The specificity sensitivity and predictive value was showed highest value in laser, but was showed favorable value in plasma light and halogen light. In regard to above results, laser, plasma light and halogen light all considered to be reliable method for determining individual caries activity. And they were also considered to be practical method because it would be simple, inexpensive, and time saving method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.90-97
• /
• 2019

Purpose: Previous studies related with occlusal contact area were limited that interocclusal thickness level or the method of measurement has not been accurate in measuring. The purpose of this study was to investigate the relation between head posture and occlusal contact area using photo occlusion analysis. Materials and Methods: 54 subjects with complete dentition (44 men, 10 women / 23 to 33 years of age) were included. To identify the relationship between head posture and occlusal contact area, subjects took interocclusal record in maximal intercuspal position with three different positions(supine position ($0^{\circ}$) / inclined position ($45^{\circ}$) / upright position ($90^{\circ}$)) on the dental unit chair. Occlusal contact area was analyzed using photo occlusion analysis. Statistical analyses were performed with SPSS ver.25.0 at 95% confidence interval. Results: Head posture has no significant effect on the changes of occlusal contact area (P > 0.05). Conclusion: When interocclusal relation is stable, head posture does not change a interocclusal record because head posture has no significant effect on occlusal contact area. Analysis of occlusal contact area using photo occlsion analysis device is useful due to its material property and simplicity.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.147-152
• /
• 2018

A polarizing spectacle lens having a perfect blocking of ultraviolet light and a partial blocking of blue light and having photochromic properties has been developed. It is a functional spectacle lens which can be used as a spectacle lens in the daytime, which plays a role of sunglass in a space with strong ultraviolet rays, dramatically reducing glare caused by late-night driving or reflected light. Photochromism was recovered in 0.5 second dark reaction and 3 seconds recovery time. The polarization function was about 95%. Ultraviolet rays were completely blocked and blue light was reduced by about 30%. A lens that combines photochromic and UV blocking and polarization functions is the first attempt at investigating the domestic market.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.177-184
• /
• 2004

Objectives : This study investigated the hypothesis that increasing light-curing time would leave the oxygen-inhibited layer (OIL) of the adhesive thinner, and in turn, result in lower shear bond strength (SBS) than those obtained by the routine curing procedures. Methods：120 human extracted posterior teeth were randomly divided into three groups for bonding with three adhesives：All Bond 2/sup (R)/, One Step/sup (R)/, and Adper Prompt/sup (R)/. They were subsequently divided into four subgourps with different light-curing time (10, 20, 30 and 60s). The assigned adhesives were applied on superficial occlusal dentin according to the manufacturer's instructions and cured with one of the four curing times. Composite resin cylinder, 2.35㎜ in diameter, were built on the cured adhesive and light-cured for 40s. SBS were measured after 24h from the bonding using a universal testing machine (crosshead speed 1.0 ㎜/min). The relative thickness of the OIL and the degree of conversion (DC) were determined from the adhesive on a slide glass using FT-NIR in an absorbance mode. Data were analysed with One-way ANOVA and Duncan's multiple test (p〈0.05), Results：With increasing cure time, although there were no significant difference in th SBS of One-step and Adper Prompt (p〉0.05), those of All Bond 2 decreased significantly (p〈0.05). The relative thicknesses of the OIL on each adhesive were not affected by the cure time (p〉0.05). Although the DC of All-Bond 2 were statistically not different with increasing cure time (p〉0.05), those of One-Step and Adper Prompt showed an increasing trends with increasing cure time (p〈0.05). Conclusions：Increasing light-curing time did not affect on the relative thickness of the OIL of the adhesives, and in turn, on the SBS to dentin.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.153-153
• /
• 2011

신 재생에너지 정책이 발전차액지원제도(Feed In Tariff; FIT)에서 신 재생에너지 의무할당제(Renewable Portfolio Standard; RPS)로 변화하면서 원별 경쟁이 가속화되고 있다. 태양광 산업 역시 이러한 환경 변화에 대처해야 하며, 그를 위한 정책 구성이 필요하다. 이에 태양광 산업 정책은 크게 두 부분으로 구분하여 진행해야 한다. 첫째, 폴리실리콘(Poly silicon)을 활용하는 다결정실리콘 태양광에너지에 초점을 맞춘 정책이며, 둘째, 미래에 상용화될 차세대 태양광 에너지에 대한 대비를 위한 연구 개발(R&D) 정책이다. 먼저 다결정실리콘 태양광에너지에 초점에서의 산업 정책은 산업육성정책과 수출정책, 인프라 구성 등으로 나눌 수 있다. 현재 과도한 국가부채로 인한 세계경제 악화로 태양광에너지 업체들의 경제성이 악화하고 있다. 더욱 빨리 그리드 패리티(Grid Parity)를 달성하기 위해 수직통합 등의 필요성이 대두하고 있다. 이에 본 연구는 그리드 패리티 달성시기를 위해 태양광 산업 내 세대 변화를 하는 경우와 하지 않는 경우를 비교하기 위해 고려할 요소를 분석하였다. 현재 신 재생에너지 가운데 태양광에너지는 타에너지원 대비 가격경쟁력을 갖추지 못한 상황이다. 그러나 수출을 고려했을 때의 향후 한국의 차세대 성장동력으로의 발전가능성이 존재한다. 따라서 가격경쟁력이 가장 중요한 영향을 미칠 신 재생에너지 의무할당제 정책 하에서 태양광에너지가 전혀 채택되지 않는 상황을 막기 위한 정책이 필요하다. 그를 위해 필요한 정책적 요소들을 알아보았다. 마지막으로 인프라 구성을 위해 태양광 산업의 가치사슬(Value Chain) 상에서의 기업 분포와 경쟁력에 대한 조사를 시행하였다. 이는 태양광 산업 내의 경쟁력을 갖춘 부문과 그렇지 못한 부문을 구별하기 위함이다. 미래에 상용화될 차세대 태양광 에너지를 준비하는 과정에서는 연구개발 관련 정책이 가장 중요하게 다뤄야 할 부분이며, 그를 위해 정부 차원에서 지원하고자 하는 기술로드맵 등에 대해서 정리하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.97.1-97.1
• /
• 2010

유연금속기판위에 DC 마그네트론 스퍼터링을 이용하여 Ag/ZnO 이중구조의 후면반사막을 증착하고 Ag 표면조도 변화에 따른 후면반사막의 반사특성 변화와 플렉서블 비정질 실리콘 박막 태양전지의 셀 특성에 미치는 영향을 조사하였다. Substrate구조를 갖는 플렉서블 실리콘 박막 태양전지에서는 실리콘 박막 광흡수층의 상대적으로 낮은 광 흡수율로 인하여 입사광에 대한 태양전지 내에서의 광 산란 및 포획이 태양전지 효율을 증대시키는데 매우 중요한 역할을 하는 것으로 알려져 있다. 플렉서블 실리콘 박막 태양전지에서의 후면반사막은 광 흡수층에서 흡수되지 않는 입사광을 다시 반사시켜 광 흡수를 증대시키며 이때 후면반사막 표면에서 반사 빛을 효율적으로 산란시켜 이동경로를 증대시킴으로써 광 흡수율을 더욱 향상시킬 수 있다. 본 연구에서는 유연금속 기판위에 Ag와 ZnO:Al($Al_2O_3$ 2.5wt%) 타겟을 사용한 DC 마그네트론 스퍼터링법으로 Ag/AZO 이중구조의 후면반사막을 제조하고, Ag 박막의 표면형상 변화와 이에 따른 후면반사막의 반사도 변화를 비교, 분석하였다. 증착 조건 변화에 따른 표면 형상 및 반사 특성은 Atomic Force Mircroscope(AFM), Scanning electron miroscopy(SEM), UV-visible-nIR spectrometry를 통하여 분석하였다. 서로 다른 표면 거칠기를 갖는 후면반사막 위에 n-i-p구조의 a-Si:H 실리콘 박막 태양전지를 제조한 후 태양전지 동작 특성에 미치는 영향을 조사하였다. n,p층은 13.56MHz PECVD, i층은 60MHz VHF CVD를 사용하여 각각 제조 하였으며, Photo I-V, External Quantum Efficiency(EQE) 분석을 통하여 태양전지 특성을 조사 하였다. SEM 분석결과 공정 온도가 증가 할수록 Ag 박막의 표면 결정립 크기도 증가하였으며, AFM분석을 통한 Root-mean-square(Rms)값은 상온에서 $500^{\circ}C$로 증착온도가 증가함에 따라 6.62nm에서 46.64nm까지 증가하였다. Ag 박막의 표면 거칠기 증가에 따라 후면반 사막의 확산 반사도도 함께 증가하였다. 공정온도 $500^{\circ}C$에서 증착된 후면반사막을 사용하여 a-Si:H 태양전지를 제조하였을 때 상온에서 제조한 후면반사막에 비하여 단락전류밀도 (Jsc)값은 9.94mA/$cm^2$에서 13.36mA/$cm^2$로 증가하였으며, 7.6%의 가장 높은 태양전지 효율을 나타내었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.40-47
• /
• 2004

Recently, the utilization of subway stations for varied working spaces is beginning to receive more attention. However, due to feeling of closeness and rejection to the underground, a daylighting is useful to alleviate the complaints of subway environments. This paper aims to investigate and evaluate the luminous environments of subway stations with and without daylighting in Seoul. At the first stages, the field experiments are performed to estimate the illuminance levels of chosen three subway stations. And then, the interview and questionnaire surveys are conducted to evaluate the luminous atmospheres of them. As results, the daylighting effects to subway visual environments are analyzed. Also, the basic data for a daylighting design are suggested.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.144-148
• /
• 2003

알루미나볼 위에 Titanium tetraisopropoxide(TTIP)를 원료로, 화학기상증착법으로 제조된 $TiO_{2}/Al_{2}O_{3}$ 볼을 이용하여 벤젠의 기상 광 분해 실험을 실시하였다. 기상분해 과정의 연속적 측정을 위하여 순환식의 반응장치를 자체 제작하였으며, PID(Photo Ionization Detector)방식의 VOCs meter를 이용하여 광조사에 의한 벤젠의 분해율을 실시간으로 측정하였다. 기상의 벤젠과 $TiO_2/Al_{2}O_{3}$ 볼의 원활한 흡착을 위해 30분간 암반응 시킨 후 광분해율을 측정한 결과 광조사에 의한 분말표면에 흡착된 VOCs의 탈착에 의한 초기 농도증가 현상이 공통적으로 측정되었으며, 흡착 면적이 작을수록 농도 증가 또한 낮게 측정되었다. 또한 최적조건을 기준으로 실시한 분해 실험 결과 60ppm이상의 고농도 영역에서는 VOCs의 분해가 비교적 느리게 진행되었지만, 60ppm이하의 저농도 영역에서는 급속한 VOCs의 분해가 측정되었다. 마찬가지로 반응 표면적이 넓을수록, 광원이 많을수록 그리고 광분해에 사용된 자외선 램프의 강도가 클수록 광반응에 의한 벤젠의 분해율이 증가하였다.