• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.13-19
• /
• 1998

In the dye sensitization for the solar energy conversion with a photoelectrochemical cell containing allylthiourea, the time profile of the sensitized photocurrent showed a rise and fall with the irradiation time. The dye solution before and after irradiation was analyzed by means of spectroscopic methods. A new precipitation reaction between sensitizer and supersensitizer and photobleaching of the dye appeared to be involved in the decreased photocurrent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.336-337
• /
• 2007

The energy conversion characteristics of $TiO_2$ paste of dye-sensitized solar cell (DSSC) was investigated. In the case of DSSC without a binder, the current density increased due to the development of porosity. As for DSSC with a binder, the fill factor increased due to the development of network among the particles. The energy conversion efficiency of 7.2% was obtained due to the porosity and the network as for DSSC with the mixed binder (Vol. 50:50).

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.204-207
• /
• 1996

태양의 광에너지를 전기에너지로 변환하는 태양전지의 재료는 현재 무기반도체가 주를 이루고 있지만 최근 유기반도체가 재료자체 물성의 연구진전과 더불어 태양전지로서 개발가능성이 논하여 지고 있다. 한편 유기반도체의 장점은 1)박막으로 제작이 용이하고 2)대량생산에 의한 저가제조가 가능하며 3)경량화를 할 수 있고 4)그 기능의 다양성을 줄 수 있다는 것이다. 또한 단점은 캐리어 트랩 밀도가 커서 반송자(carrier)의 수명과 이동도가 작고 확산길이도 짧기 때문에 광수집 효율이 매우 낮아 광전변환효율이 낮다는 것이다. 또한 일반적으로 유기반도체는 저항율이 커서 오옴성 접촉이 어렵고 입사광 강도의 증대에 따라 변환효율이 감소하는것도 큰 문제로 되어있다. 따라서 본고에서는 지금까지 유기반도체를 사용한 태양전지의 원리 및 제조기술을 간단히 살펴보고 특성과 연구동향등을 분석하여 앞으로 유기반도체 태양전지의 나아가야할 방향을 찾아보고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2021

Technologies for an MVDC(medium voltage direct current) distribution system are being considered as an effective alternative to overcome the interconnection delay issues of PV systems. However, the implementation of a DC distribution system might lead to economic problems because of the development of DC devices. Therefore, this paper deals with the scale of a PV plant based on its capacity and proposes hosting-capacity models for PV systems to establish a network to evaluate the feasibility of an MVDC distribution system. The proposed models can be classified as AC and DC distribution systems by the power-supply method. PV systems with hundreds of MW, dozens of MW, and a few MW can be categorized as large-scale, medium-scale, and small-scale models, respectively. This paper also performed modeling for an economic evaluation of MVDC distribution system by considering both the cost of AC and DC network construction, converter replacement, operation, etc. The profit was composed of the SMP and REC rate of a PV plant. A simulation for economic evaluation was done for the MVDC distribution system using the present worth and equal-principal costs repayment method. The results confirmed that the proposed model is a useful tool to evaluate economic issues of a DC distribution system.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.694-701
• /
• 2013

A new copolymer named T-TI24T (poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-di-thiophen-2-yl-isoindole-1,3-dione))- alt-(2,5-thiophene))) based on phthalimide derivative and thiophene is synthesized by the Stille-coupling reaction. The polymer shows relatively high number average molecular weight of 86500 g/mol with good solubility in common organic solvents such as chloroform, 1,2-dichlorobenzene, and toluene and is thermally stable up to $380^{\circ}C$. Besides, it possesses a relatively low highest occupied molecular orbital (HOMO) energy level of -5.33 eV, promising the high open circuit voltage ($V_{oc}$) for photovoltaic applications. Active layer solution of polymer T-TI24T-as a donor and (6)-1-(3-(methoxycarbonyl)- {5}-1-phenyl[5,6]-fullerene (PCBM)-as an acceptor in different weight ratios is applied to fabricate the polymer solar cell devices. The ratio of polymer/PCBM affects the solar cell efficiency and the best performance exhibits in the device with polymer/PCBM = 1:3 (w/w), which shows a power conversion efficiency (PCE) of 0.199% and a $V_{oc}$ of 0.99 V, respectively. Even though the device shows the very low PCE, the $V_{oc}$ is higher than that of well known bulk heterojunction type solar cell based on P3HT:PC61BM (c.a. 0.5 V).

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.396-401
• /
• 2013

Alternating copolymers, poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT) and poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT), were synthesized by the Suzuki coupling reaction. The copolymers were soluble in common organic solvents such as chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran and toluene. The maximum absorption wavelength and the band gap of PCD20TBT were 535 nm and 1.75 eV, respectively. The maximum absorption wavelength and the band gap of PN40TBT were 560 nm and 1.97 eV, respectively. The HOMO and the LUMO energy level of PCD20TBT were -5.11 eV and -3.36 eV, respectively. As for PN40TBT, the HOMO and the LUMO energy level of PCD20TBT were -5.31 eV and -3.34 eV, respectively. The polymer solar cells (PSCs) based on the blend of copolymer and PCBM (1 : 2 by weight ratio) were fabricated. The power conversion efficiencies of PSCs based on PCD20TBT and PN40TBT were 0.52% and 0.60%, respectively. The short circuit current density ($J_{SC}$), fill factor (FF) and open circuit voltage ($V_{OC}$) of the device with PCD20TBT were $-1.97mA/cm^2$, 38.2% and 0.69 V. For PN40TBT, the $J_{SC}$, FF, and $V_{OC}$ were $-1.77mA/cm^2$, 42.9%, and 0.79 V, respectively.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.67-72
• /
• 1998

The crystallized CuPc and PbTe films are formed by thermal evaporation and pulsed ArF excimer laser ablation. Structural and electrical properties of thin film is observed by XRD and current-voltage(I-V) curves. From XRD analysis, both PbTe and CuPc thin films show a-axis oriented structure. For the measurement of photovoltaic effect, the transverse current-voltage curve of CuPc/Si, PbTe/Si and PbTe/CuPc/Si junctions have been analyzed in the dark and under illumination. The PbTe/CuPc/Si junction exthibits a strong photovoltaic characteristics with short circuit current($J_{sc}$) of $25.46\;mA/cm^{2}$ and open-circuit voltage($V_{oc}$) of 170 mV. Quantum efficiency and power conversion efficiency are calculated to be 15.4% and $3.46{\times}10^{-2}$, respectively. Based on the results of QE and ${\eta}$, the photocurrent process of PbTe/CuPc/Si junction can be explained as following three effective steps; photocarrier generation in the CuPc layer, carrier separation at PbTe/CuPc interface, and finally a transportation of electrons through the PbTe layer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.182-185
• /
• 2014

In this paper, the ADC performs research and development for high speed data transfers to minimize the optical delay. Have more $6{\mu}s$ delay in the data signal converting optical repeater transmission system existing there has been a limit on the high-speed data transmission, and signal conversion. The need to develop a new technique to reduce the delay in time within $2{\mu}s$ data signal converted by using this direct conversion system. It is desired the development of the core technologies necessary for the signal transduction component, such as mobile communications LTE, LTE advanced service transport network is established, the delay time $3{\mu}s$ technology for reducing the delay time in the signal converting a revolutionary step is applied in this paper we have developed an ADC.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.356-360
• /
• 1983

The photocurrent vs. potential characteristics of the $TiO_2$ ceramic electrodes have been investigated as functions of numerous variables including sample purity hydrogen reduction condition and pH of the electrolyte. The difference inphotoresponse between 99.99% and 98.5% $TiO_2$ electrodes was due to electron trapping effect. As the hydrogen reducing temperature of $TiO_2$ electrodes were increased the photocurrent was also increased to certain condition and then decreased. These results can be explained by the behavior of oxygen vacancies.

• Information and Communications Magazine
• /
• v.28 no.12
• /
• pp.61-68
• /
• 2011

가시광 무선 통신 기술은 LED의 반도체 특성을 이용하여 디지털 신호를 송신하고, 빛의 유무를 판단할 수 있는 PD를 이용하여 광전 변환을 통해 디지털 데이터를 수신할 수 있는 차세대 무선 통신 기술로 평가받고 있으며, 이에 대한 많은 연구가 진행되고 있다. 본고에서는 특히 가시광 무선 통신 기술을 활용할 수 있는 응용서비스 분야를 설명하고, 특히 실내/실외 위치 측정 기술의 국내외 연구 동향에 대해 소개한다.