• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.10-13
• /
• 1994

합성윤활유를 기재로한 그리이스 제조개발은 비교적 오랜 역사를 갖고 있지만, 이는 광유베이스에 비하여 가격상승 때문에 일반적인 산업분야에서의 사용가능성은 매우 희박하다고 인식되었다. 그러나 근년에 이르러서는 모든 산업계의 기술혁신으로 각종기긱의 Maintenance Free화, 고속화, 소형화가 비약적으로 발전되어짐에 따라서 그리이스 윤활의 요구 성장도 다종다양화가 되었다. 한 예를 들어 살펴보면 저온으로\ulcorner 고온에 이르기까지의 조건 하에서 사용되는 항공기, 자동차용 전자제품 및 Actuator등의 윤활개소개라든가, 장수명, 음향특성 저토오크성 등에서 사용되는 OA기기, 음향기기, 전동기, 가전기기, 메카트로닉스기기 등의 윤활개소가 있는가 하면 주로 고온하 에서 사용되는 제철설비, 제지설비(製紙設備), 자동차도장건조로(自動車塗裝乾操爐) 등 설계 합성유를 기재로한 그리이스의 사용 용도범위는 대단히 폭넓게 진행되고 있음을 엿볼 때 본 기고에서는 합성윤활유의 종류와 특성 그리고 이러한 합성기재를 사용한 그리이스의 특성에 대하여 간략하게 살펴보기로 하겠다.

• Journal of Plant Biology
• /
• v.32 no.1
• /
• pp.33-40
• /
• 1989

Polysomal polyadenylated mRNAs which were purified from pea leaves were fractionated by sucrose grandient sedimentation. Fractions corresponding to the peak at 11.5S were found to contain mostly mRNA encoding the precursor polypeptide to the small subunit of ribulose bisphosphate carboxylase (rbcS) by in vitro translation in wheat germ extract. Double-stranded cDNA which was synthesized from the 11.5S mRNA was cloned into Hind III site of plasmid pBR 325. A cDNA clone, H24, was identified to code for rbcS. In vitro translation product of the hybridization-selected mRNA was molecular weight 20,000, presumably the precursor of rbcS. The nucleotide sequences of the H24 showed almost complete homology with the sequences encoding the transit peptide of the rbcS-3A gene which was reported by Fluhr et al.(1986).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.338-343
• /
• 2011

In this paper, the FT-IR, conductivity and flow electrification phenomena of Vegetable oils were discussed. Vegetable oil has high flash point and eco-friendly properties compared to conventional mineral oil. Accelerated aging transformer oil samples produced in the oven at 140[$^{\circ}C$] for 500 hours, 1000 hours, 1500 hours, 2000 hours. Serial device to measure the flow electrification phenomena was designed and fabricated. Pico ammeter and the Labview data measurements were utilized. The effects of Temperature and antistatic agent on fluid flow electrification were investigated. Both Mineral and vegetable oil showed similar trends for temperature change. The polarity reversal occurred in mineral oil with antistatic agent above 10 ~ 30[ppm] and in vegetable oil with antistatic agent above 5[ppm].

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.28-30
• /
• 2007

본 논문은 변압기의 과부하 상태를 모의하고 내부 절연물의 잔존수명을 평가하기 위한 방법으로 열적 스트레스를 인가한 가속 수명 시험을 수행하여 광유 함침 절연지의 전기적 기계적 열화 특성을 분석하였다. 시험에 사용된 절연 재료는 변압기의 주 절연물로 널리 사용하고 있는 셀룰로스계 크래프트 절연지와 광유계 절연유를 사용하였다. 가속 열열화 시험은 IEEE/ANSI Standard C59.91-1981의 수명 예측 곡선에 의거하여 국내 배전환경에 부합하도록 $55^{\circ}C$ 절연시스템을 기준으로 하였으며, $150^{\circ}C$에서 약 1,000시간 동안 열 스트레스를 인가함으로써 변압기의 수명이 다하도록 모의하였다.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.55-57
• /
• 2007

오일 변압기 내부의 절연물은 절연지, 프레스보드, 광유 또는 식물유가 주로 사용되고 있다. 사용 기간과 과부하 조건에 따라 열화정도가 달라질 수 있으며, 내부 절연물의 열분해 및 가수분해로 인해 수분은 자연스럽게 생성될 수 있다. 생성된 수분은 절연을 약하게 하는 주된 요인으로 작용해 기기의 고장 또는 정전을 초래할 수도 있다. 본 논문에서는 변압기 내부 절연물의 주파수응답 특성과 절연상태 값을 바탕으로 변압기 내부를 전기적 소자로 등가화하였다. 그 후 등가화된 회로를 이용해 회복전압법의 원리에 따라 EMTP 프로그램을 활용해 분극특성을 모의하였다. 실제 측정 값과의 비교를 위해 보고된 문헌의 데이터를 활용하였고, RVM을 이용한 실측값과 유사한 결과를 얻게 되었다. 따라서 본 시뮬레이션에 활용된 전기적 소자값을 변경함으로서 내부 절연물의 열화정도에 대한 기대 파형을 예측할 수 있는 유용한 도구로 활용될 수 있음을 확인하였다.

• Journal of the Korean Professional Engineers Association
• /
• v.45 no.6
• /
• pp.28-32
• /
• 2012

Namhae chemical is one of the largest fertilizer manufacturing company in Korea which company has operating 4 unit agitator gear boxes and producing variety kinds of fertilizer production. The gearbox operating temperature of agitator is approximated in $55^{\circ}C{\sim}90^{\circ}C$ and required to keep operating continuous without stopping. The system required high performance oil and longer oil drain interval as limited workforce in maintenance team. It was lubricated by mineral gear oil of ISO VG 320 and also need to change to new oil frequently. Namhae Chemical would expect to keep stable operating condition without shut down and consider, lower cost of operation and equipment protection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1745-1750
• /
• 2017

Starting from the distribution transformer, the insulation oil for the oil immersed power transformer is being used to convert the vegetable oil from the existing mineral oil. Vegetable oil is better in temperature characteristics and insulation performance, is not toxic, and has better biodegradable characteristic than that of mineral oil. In order to investigate the corona inception voltage and dieclectic charateristics of the two insulating oils, three oil immersed transformers using mineral oil and vegetable oil were made and thermal cyclic aged. In this paper, the changes in the corona discharge inception voltage, chemical and electrical properties of the two sampled insulating oils from the transformers had been studied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.97-102
• /
• 2012

A hermetically sealed oil transformer is designed by applying expanding function of the tank due to the volume changes of the insulation oil according to the temperature rises. When the insulation oil expands, an increase in the volume of the corrugated fin prevents a pressure rise of the transformer. For a wind turbine transformer, a vegetable-oil-immersed transformer has the advantages of excellent biodegradation and fire-resistant properties like an exceptionally high fire point. When vegetable oil is substituted for mineral oil, however, the maximum winding temperature rises because of the decrease in the internal circulation flow rate resulting from the variations of the oil's physical characteristics, such as density and viscosity. The purpose of this study is to develop a hermetically sealed vegetable oil transformer that can be applied in a wind turbine and to analyze the thermal stability of the active part of the transformer to deal with pressure variations due to the temperature changes. In addition, thermal tests for the vegetable oil transformer have been performed, and the measured values are compared with the analysis results.

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.81-92
• /
• 2012

To product multi-grade oil like engine oil, a sort of mineral base oil is mixed with a fundamental additive liquid package and a polymer liquid as viscosity index improver in order to improve the lubricating property of oil. That is, engine oil is the mixture of more than two fluids. In this paper, it will be systematically organized the governing equation describing non-Newtonian thermo-hydrodynamic lubrication related with the mixture of incompressible fluids based on the principle of continuum mechanics. Then, in order to find how the thermal analysis effect on the bearing performance lubricated with the mixture of multi-fluids, it will be compared to the performances between the mixture of each liquid to be blended and multi-grade engine oil as a single fluid in a high speed journal bearing. It is found that, in the case of lower viscosity oil, the difference of pressure distribution between the above two cases turns out to be existed, even if the load capacity is same level.

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.239-245
• /
• 1997

The sorption kinetic was studied to evaluate feasibility of removing PCBs from mineral oil with activated carbon. Adsorption efficiency for Aroclor 1242 which is composed of lower chlorinated PCB formulations was $\geq$ 95%, whereas the adsorption efficiency for Aroclor 1260 having higher chlorinated constituents was considerably lower with the efficiency falling to 75%. The observed difference in the adsorption efficiency is attributed to the geometry of PCBs with non-planar and coplanar structure. The concentration of coplanar PCBs is appreciably higher in Aroclor 1242. Since toxicity is primarily associated with coplanar congeners, the preferential adsorption of coplanar congeners by activated carbon accounts for the fact that toxicity reduction can be achieved through this process. The efficiency of process was assessed in terms of Toxicity Equivalence Factor (TEF).