• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.23-27
• /
• 2007

Blu-ray disc 이후의 차세대 고밀도 광 기록 기술로 주목받는 홀로그래픽 데이터 스토리지 시스템을 설계, 제작하고 기록 재생 test 를 수행하였다. 시스템은 각도 다중화법을 채택하였고, 파장 405nm, NA 0.55 신호광 Fourier 변환 렌즈로 미디어에 defocus 하여 기록하였다. 1 page 용량은 raw bit 로 0.74Mbit 이고, SLM 과 CCD 의 over-sampling 비율은 1:1.5 가 되도록 구성하였다. 얻어진 raw 이미지는 위치 및 distortion 보상등의 신호처리 후, 70page 다중화 조건에서 bER $1{\times}10-2$ 수준으로 재생해 낼 수 있었다. 온도 변화에 의한 신호 열화를 보상하기 위해 External Cavity Tunable Blue LD 를 개발하여 온도 변화 $10^{\circ}C$까지 보상 가능함을 확인하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.81-86
• /
• 2005

As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement to the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.203-208
• /
• 2005

In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the optical alignment characteristics of multi-axis ultra precision stage were studied. The alignment algorithms were studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Two kinds of alignments, such as 1 ch. input vs. 1 ch. output optical stack, and 1 ch. input vs. 8 ch. output PLC stacks were performed for investigating the alignment characteristics.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.13-24
• /
• 2018

As part of the "Carbon free Island 2030" policy, the local government of Jeju Island is currently working to reduce carbon through renewable energy supply. However, renewable energy is difficult to predict due to intermittent characteristics. If the share of renewable energy increase, it is difficult to plan of supply of electricity to grid due to that characteristic of renewable. In this paper analyze the fluctuation rate and the capacity credit of wind power and PV to find out how much wind power and PV contribute to supply of electricity of power system in Jeju. As a result mean value of variation rate of wind power and PV is about 3%, 5% and capacity credit is about 10% and 2% respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1271-1276
• /
• 2015

The recent trend is that diesel power generation on islands where its prime cost for power generation is high is replaced by new and renewable energy. Therefore, south Jeolla province is progressing the construction project of self-sufficient islands for the areas where power is supplied by depending on diesel generators, which is the project that power is supplied through eco-friendly energy source using sunlight, wind power and energy storage device etc. However, it is difficult to construct new and renewable energy source with the capacity to respond to the load perfectly due to its environmental and geographical conditions regarding capacity design of new and renewable energy. Besides, Microgrid design considering appropriate capacity design of the system components and efficient operation is required through the analysis of climate conditions and load patterns from the design stage for optimal composition of a hybrid system with economic feasibility. Therefore, this study is aimed to conduct a research on optimal combination, capacity calculation and economic feasibility by comprising a hybrid power generation system which will replace 40% of power generation by diesel as new and renewable energy source for Geomun Island where has more than 300 households and requires expansion of the facility among islands located in southwest coast.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.507-517
• /
• 2010

The KOREAN AIR - R&D Center has developed a solar array for STSAT-2 Flight Model, SaTReC-KAIST, using a fully localized technology and has verified the performance through a launch vibration test, orbit environment test and electrical performance test. The solar array will be launched at NARO Space Center by KSLV-I which is the first Korean launch vehicle, in May 2010. In this paper, a current-voltage curve that shows the power characteristics of solar arrays was derived by applying elements that affects the power performance of STSAT-2's solar arrays to the solar cell equivalent models. The result was compared to LAPSS test results, and accuracy of the solar cell equivalent model and the power performance simulation has been analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.140-141
• /
• 2010

터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 기존 터치패널은 유리 기판 위에 ITO박막(투명전도막)을 진공코팅하여 사용하여 왔지만, 최근 터치패널은 경량화를 고려하여 PET 필름 기판 위에 ITO 박막을 진공코팅하여 사용하고 있다. PET 필름의 유연성 때문에 ITO 코팅된 필름을 PC 혹은 강화유리 위에 OCA 물질을 이용하여 다시 고정하여야 한다. 이때 터치패널 제작시 생산공정이 늘어나 생산성이 떨어지고, 터치패녈의 광투과율도 떨어지는 2차적인 문제가 발생한다. 이를 해결코자하는 터치페널 업체의 needs가 있고, 최근에 이를 해결하기 위하여 PC, 강화유리, 그리고 COP 기판 위에 ITO 박막을 직접 진공코팅하는 공정개발이 진행되고 있다. ITO 박막은 진공코팅 중에 열을 가하여 결정화를 이루어야 하는데, PC, 강화유리 그리고 COP 기판의 열에 약한 특성을 고려하여, 열을 가하지 않고 ITO 박막을 진공코팅하여야 한다. 이러한 ITO 박막의 진공코팅 공정에는 In-line magnetron sputtering system이 사용된다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 강화유리 기판 위에 터치패널용 고투과율 투명전도성 ITO 박막을 제작하고 그 특성을 조사하였다. ITO 박막의 면저항은 230Ohm/cm2, 최고 광투과율은 90.96%(@541~543nm), 그리고 550nm에서 광투과율은 90.45%로 ITO 박막 코팅 전후에 투과율 차이가 0.4임을 확인하였다. 정전용량방식의 터치패널에서는 ITO 박막 코팅 전후에 투과율 차이가 1 이하의 특성을 필요로 하는데, 이는 ITO 박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 needs를 고려하면 본 연구에서 매우 중요한 연구성과를 얻었다고 말할 수 있다.

• Journal of Sensor Science and Technology
• /
• v.11 no.1
• /
• pp.39-47
• /
• 2002

Optical disk drives read information by replacing a laser beam on the disk track. As information has become larger, the more accurate position control of a laser beam is necessary. In this paper, we report the analysis and fabrication of the micro mirror for optical disk drivers. The mirror was fabricated by using MEMS technology. Especially, the Process using the lapping and polishing step after the bonding of the mirror and electrode plates was employed for the process reliability. The mirror size was $2.5mm{\times}3mm$ and it needed about 35V for displacement of $3.2{\mu}m$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.538-547
• /
• 2004

Optical Burst Switched (OBS) networks usually employ one-way reservation by sending a burst control packet (BCP) with a specific offset time, before transmitting each data burst frame (BDF). Therefore, The quality of service may be degraded because contentions may lead to loss of BDFs. Especially, this phenomenon becomes more serious when burst size is longer. This necessitates an effective method of prevention to avoid burst collision in nodes. OBS networks can employ several methods to avoid such burst losses. One is that burst size is cut short to reduce burst loss probability during scheduling time. In this paper, we evaluate the burst generation and transmission using Sub-Carrier Multiplexting (SCM) in OBS networks. We propose an appropriate burst assembly architecture and transmission scheme based on SCM in OBS networks. The performance of SCM in OBS networks is examined in terms of number of Sub-Carriers per wavelength, burst loss probability, throughput, and total bandwidth of an optical fiber.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.476-481
• /
• 2014

In this paper, we design the pre-equalizer of transmitter circuit in order to enhancement modulation bandwidth of white LED which is light source of VLC (Visible Light Communication). Also, we eliminate yellow light component by optical filtering which mitigate frequency response of white LED. Power loss by optical filtering is overcome by using convex lens. By applying proposed system, 3 dB bandwidth deciding modulation bandwidth of white LED increases from 3 MHz to more than 25 MHz and the transmission distance increases by optical design which secure additional signal power. We optically modulate NRZ-OOK signal to LED and receive light signal using APD. We analyze received data using CSA and RFSA. As a result, we experimently demonstrate the possibility that transmits NRZ-OOK signal up to 30 Mbps in 4.5 m, 50 Mbps in 1.5 m through the pre-equalizer and optical design.