• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.141-153
• /
• 2005

PV 태양광 발전은 PV 재료가 고가이므로 일반 전력비용에 비해 상대적으로 비용이 높아진다. 저가형 광학 집광기술과 PV를 통합하게 되면, 비용뿐만 아니라 설치면적 등에서 유리하게 되나, 집광기의 단점이 함께 추가되게 된다. 집광기는 작은 수광각과 송신광선을 갖고 있어 PV 모듈에 필요한 태양광, 광학손실의 손실정도를 최소화하기 위한 신중한 시스템 디자인과 2축형 트레킹 장치가 필요하다. 고정식 비집광 시스템보다 더 많은 에너지를 얻기 위해서는 광학시스템의 손실율을 줄이고, 고효율의 PV 모듈을 이용한 PV셀의 상호연결이 필요하다. 본 논문에서는 우선, 비이미지 프레넬 렌즈 집광기를 사용한 PV 시스템에 대하여 간단하게 설명한 후, 출력전력값을 이론적으로 예측하고 PV 효율과 시스템 성능을 제시하였다. 프레넬 렌즈 선형 집광기 통합 PV 시스템과 비집광 PV 모듈의 출력전력값과 시스템 비용을 비교하면, PV 전력비용을 줄일 수 있는 집광기의 이용이 유용한 것을 알 수 있다. 따라서, 집광형 PV 시스템은 미래의 에너지 이용에 매우 유리한 시스템이라 할 수 있다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.239-257
• /
• 1996

$\beta$-BaB2O4는 고출력 가시광선 및 적외선을 발진시키는데 유용한, 비선형 특성을 가진 물질이다. $\alpha$-$\beta$ 상전이 온도가 녹는점보다 18$0^{\circ}C$ 낮기 때문에 보통 flux법으로 단결정을 성장시킨다. 수년전 Itoh등은 $\beta$-BaB2O4단결정을 congruent조성의 용액으로부터 Czochralski법으로 metastable한 상태에서 직접 성장시켰다. 그렇지만 그 공정은 잘 이해되지 않고 있으며 재현하기가 매우 어렵다. 저자들은 $\beta$-BaB2O4단결정을 용액표면온도도 1034$^{\circ}$-1085$^{\circ}C$, pulling rate 3mm/h, 10-30 rpm의 범위에서 성장시켰으며 융액표면의 온도구배는 $\beta$-상으로 성장시키는데 매우 중요한 인자로 여겨진다. Seed로는 직경 1-2mm의 c축방향 $\beta$-BaB2O4단결정 봉이 상용되어 성장방향을 조절하고 열응력을 최소화시켰다. 성장된 $\beta$-상의 단결정들은 6-fold모양을 하며 표면에 작은 비늘같은 것들이 붙어있고 중심부에 core가 있는 것을 알았다. Flux법으로 성장시킨 $\beta$-BaB2O4단결정을 사용한 seeds는 단결정 성장 및 냉각 중에 cracks이 자주 발생하였으며, boule의 cracks은 afterheater를 사용할 경우 다소 줄일 수 있었다. 성장된 단결정의 광학특성이 측정되었다.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.205-213
• /
• 2012

In this study, the stability of cream containing the ethyl acetate fraction of C. obtusa leaf extract was evaluated. The pH, viscosity, and absorbance were measured under the 4 different temperatures (4, 25, 37 and $45^{\circ}C$) and under the sun light during the 12 weeks. The control cream without containing the extract did not show pH change under the different temperatures mentioned above. However, the pH of the cream with the extract was decreased 0.11 at $4^{\circ}C$ and $25^{\circ}C$. Under the $37^{\circ}C$, $45^{\circ}C$ and sun light condition, the pH was decreased 0.55, 0.84 and 0.59, respectively. After treating the cream for 12 weeks under the different temperatures, the viscosity was measured for the cream containing the extract and control cream. The values were decreased by 2,404 cPs in average compared to the initial value for the former and control cream were decreased by 1,296 cPs in average for the latter. On the other hand, the viscosity of control cream treated under the $45^{\circ}C$ for 12 weeks was decreased (1,915 cPs) relative to the cream containing the extract, which showed 3,810 cPs decrease in viscosity. The cream containing the extract did not show absorbance change at $4^{\circ}C{\sim}37^{\circ}C$ for 12 weeks. Instead, the absorbance of the cream treated under $45^{\circ}C$ and sun light condition was decreased 32.5 % and 35.2 %, respectively. This decrease in absorbance is relatively small compared to the 54.8 % decrease of the extract sampled from the cream using ethanol solution. This indicates that the extract is stabilized in the cream. In addition, any change in color or smell was not observed through 12 weeks of the experimental time period. Also physical changes as creaming and cohesion were not shown. The results show that the cream containing C. obtusa leaf extract was relatively stable. However, it is concluded that it is still not clear in the stability of the cream containing the extract when it is stored for a long time. Accordingly, it is suggested that further study is needed for the application of the extract to cosmetics.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.209-218
• /
• 2013

The Sonoran Desert, which is located in North America, has been frequently used for vicarious calibration of many optical sensors in satellites. Although the desert area has good conditions for vicarious calibration (e.g. high reflectance, little vegetation, large area, low precipitation), its adjacency to the sea and large variability in atmospheric water vapor are the disadvantages for vicarious calibration. For vicarious calibration using top-of-atmospheric (TOA) reflectance, the atmospheric variability brings about degraded precision in vicarious calibration results. In this paper, the location with the smallest radiometric variability in TOA reflectance is sought by using 12-year Landsat 5 data, and corrected the TOA reflectance for bidirectional reflectance distribution function (BRDF) which is another major source of variability in TOA reflectance. Experiments show that the mid-western part of the Sonoran Desert has the smallest variability collectively for visible and near-infrared bands, and the variability from the sunarget-sensor geometry can be reduced by the BRDF correction for the visible bands, but not sufficiently for the infrared bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1833-1839
• /
• 2011

In this study, Global Gravitational Model EGM2008, EGM96 and 16,786 gravity points measured on land were compared and analyzed. On the assumption that land gravity data is most accurate, the correlation coefficient, differences, MSE and difference variance along the height were computed between land gravity data and EGM2008, EG96. The correlation coefficient, land gravity data and EGM2008, was computed most largely with 0.824 and the correlation coefficient with EGM96 was computed with 0.538. The standard deviation of differences between land gravity and EGM2008, EGM96 were 13.196 magl, 18.685 mgal respectively. Also the difference variance scope of EGM2008 was smaller than EGM96. There was no large variance of free-air anomaly differences between land gravity data and EGM2008 along the height however free-air anomaly differences with EGM96 varied along the height changes. Consequently EGM2008 nicely expresses Korea gravity field more than EGM96.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.299-307
• /
• 2019

Photocatalysis is an environment friendly technique for degrading organic dyes in water. Tungsten oxide is becoming an active area of research in photocatalysis nanomaterials for having a smaller bandgap than the previously favored titanium dioxide. Synthesis of hierarchical structures, doping platinum (Pt), coupling with nanocomposites or other semiconductors are investigated as valid methods of improving the photocatalytic degradation efficiency. These impact the reaction by creating a redshift in the wavelength of light used, effecting charge transfer, and the formation/recombination of electron-hole pairs. Each of the methods mentioned above are investigated in terms of synthesis and photocatalytic efficiency, with the simplest being modification on the morphology of tungsten oxide, since it does not need synthesis of other materials, and the most efficient in photocatalytic degradation being complex coupling of metal oxides and carbon composites. The photocatalysis technology can be incorporated with water purification membrane by modularization process and applied to advanced water treatment system.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.115-119
• /
• 2002

The formation of inclusion complexes between cyclodextrin(CD) and Congo red was studied by spectrophotometric methods at various temperatures. The cavity sizes are 0.49 nm, 0.62 nm for $\alpha$-and $\beta$-CD, respectively. Therefore, $\alpha$-CD was not found to form an inclusion complex with Congo red due to steric hinderance. In the $\beta$-CD use two $\beta$-CD molecules formed an inclusion complex with one molecule of Congo red, from the slope of the S-shaped curve increased. Two prominent isosbestic points appear at 346 nm and 478 nm. The formation constants were decreased with the increasing temperatures, due to low binding energy between $\beta$-CD and Congo red. The thermodynamic parameters were calculated from the plot of $lnK_f$ vs 1/T. The $\Delta$H, $\Delta$S and $\Delta$G were -50.73 kJ/mol, $-108.96J/K{\cdot}mol$ and -18.26 kJ/mol, respectively.

• Journal of the Korean Vacuum Society
• /
• v.6 no.1
• /
• pp.85-90
• /
• 1997

A new ionized sputtering process was developed to fill small trench or via using additional ionizing mechanism of sputtered particles from 32cm $AlCu_x$(x=0.5%) cathode target with rotating magnet, then drawn toward substrate by small negative DC potential. The radial uniformity in RFI magnetron sputtering was studied by plasma diagnosis and appropriate RFI coil design to improve it. Optical emission intensities of excited species. $Ar^{\circ}, \;Ar^+;Al^+, \;Al^{\circ}$ are measured across the radial direction and showed close correlation with deposit's bottom to top thickness ratios in trenches and vias of submicron opening and 1.5 aspect ratio. After increase of the diameter of RF coil from 29 cm to 32 cm and improved the power leading feedthrough symmetry by removal of asymmetric single turn region, there was an increase of uniformity from 7.5% to 1.5% in bottom to top thickness ratio in 0.6 $\mu\textrm{m}$ vias.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.256-261
• /
• 2006

Wavefront aberrations of a laser beam that was reflected from an off-axis parabolic (OAP) mirror were measured to evaluate the optical performance of the OAP mirror. For a diamond turned OAP mirror, the root-mean-square (rms) value of higher-order aberrations was only $0.03{\mu}m$ for the laser beam size of about 34 mm. The other OAP mirror which was polished at a domestic company had the rms value of higher-order aberrations of $2.07{\mu}m$ for the same beam size. Although the diamond turned OAP mirror was well fabricated to have a small amount of aberrations, the aberrations were induced by the misalignment of the OAP mirror. Especially, 0 degree astigmatism increased with the sensitivity of $0.372{\mu}m/mrad$ when the OAP mirror was tilted in the tangential plane, which agreed well with the calculated results using a commercial ray tracing software.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.102-109
• /
• 1987

Some characteristics of $SnO_2$ film which was deposited on a slide glass substrate, using dibutyl tin diacetate and oxygen, by the chemical vapor deposition were observed. The optimum condition for the preparation of the film was found to be at 420$^{\circ}C$ of substrate temperature for 20 min of deposition. Important optical, electrical, and structural features of the film were examined. It was found that the typical $SnO_2$ film on the untreated substrate was 4000${\AA}$ in thickness, transmitted 90% of the visible liglit, and provided 5800 ohms/${\square}$ of the sheet resistance. It was also found that the surface treatments of the slide glass by acid leaching were beneficial. The film structure was found to be a mixture of polycrystalline tetragonal stannic oxide confirmed by the X-ray diffraction and to be spherical fine grains concluded by the scanning electron microscopy.