• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-84
• /
• 2010

This study was attempted in order to offer basic data for implementing and applying Samjonseokjo(三尊石造), which is one of traditional stone construction method, by confirming how the constructive principle is expressed such as proportional beauty, which is contained in the modeling of Triad of Buddha Carved on Rock that was formed in the period of the Three States, centering on Triad of Buddha Carved on Rock in Susan. The summarized findings are as follows. 1. As a result of analyzing size and proportion of totally 17 of Triad of Buddha Carved on Rock, the average total height in Bonjonbul(本尊佛) was 2.96m. Right Hyeopsi(右挾侍) was 2.19m. Left Hyeopsi(左挾侍) was 2.16m. The height ratio according to this was 100:75:75, thereby having shown the relationship of left-right symmetrical balance. The area ratio in left-right Hyeopsi was 13.4:13.7, thereby the two area having been evenly matched. 2. The Triad of Buddha Carved on Rock in Seosan is carved on Inam(印岩) rock after crossing over Sambulgyo bridge of the Yonghyeon valley. Left direction was measured with $S47^{\circ}E$ in an angle of direction. This is judged to target an image change and an aesthetic sense in a Buddhist statue according to direction of sunlight while blocking worshipers' dazzling. 3. As for iconic characteristics of Buddha Carved on Rock in Seosan, there is even Hyeopsi in Bangasang(半跏像) and Bongjiboju(捧持寶珠) type Bosangipsang. In the face of Samjon composition in left-right asymmetry, the unification is indicated while the same line and shape are repeated. Thus, the stably visual balance is being shown. 4. In case of Triad of Buddha Carved on Rock in Seosan, total height in Bonjonbul, left Hyeopsi, and right Hyeopsi was 2.80m, 1.66m, and 1.70m, respectively. Height ratio in left-right Hyeopsibul was 0.60:0.62, thereby having been almost equal. On the other hand, the area ratio was 28.8:25.2, thereby having shown bigger difference. The area ratio on a plane was grasped to come closer to Samjae aesthetic proportion. 5. The axial angle of centering on Gwangbae was 84:46:50, thereby having been close to right angle. On the other hand, the axial angle ratio of centering on Yeonhwajwa(蓮華坐: lotus position) was measured to be 135:25:20, thereby having shown the form of inequilateral triangle close to obtuse angle. Accordingly, the upper part and the lower part of Triad of Buddha Carved on Rock in Susan are taking the stably proportional sense in the middle of maintaining the corresponding relationship through angular proportion of inequilateral triangle in right angle and obtuse angle. 6. The distance ratio in the upper half was 0.51:0.36:0.38. On the other hand, the distance ratio in the lower half was 0.53 : 0.33 : 0.27. Thus, the up-down and left-right symmetrical balance is being formed while showing the image closer to inequilateral triangle. 7. As a result of examining relationship of Samjae-mi(三才美) targeting Triad of Buddha Carved on Rock in Susan, the angular ratio was shown to be more notable that forms the area ratio or triangular form rather than length ratio. The inequilateral triangle, which is formed centering on Gwangbae(光背) in the upper part and Yeonhwajwa(lotus position) in the lower part, is becoming very importantly internal motive of doubling the constructive beauty among Samjae, no less than the mutually height and area ratio in Samjonbul.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.611-616
• /
• 2007

Purpose: The latissimus dorsi muscle flap is a versatile flap used in a variety of reconstructive procedures. The most common complication of LD muscle flap is donor site seroma, reported to occur in 20 to 79 percent of cases. The formation of dead space under the flap is intimately associated with seroma formation. The authors think that the use of progressive tension suture at closing donor site can decrease the formation of dead space and ultimately reduce the incidence of donor site seroma. Methods: A retrospective review was performed with 38 patients who underwent latissimus dorsi muscle harvest for breast reconstruction from March 2003 to September 2004. Progressive tension sutures were used during donor site closure in 22 patients. This group was compared with controls group(16 patients) who underwent latissimus dorsi muscle harvest without using this technique. Operation time, length of hospital stay, period of drainage, complication, and satisfaction about postoperative scar of donor site were examined. Results: The average length of hospital stay was 10.2 days and 12.7 days, and the mean duration of drainage were 7.3 days and 11.7 days in each progressive suture group and control group. These results were statistically significant (p<0.05). In the 22 patients who underwent progressive tension suture, none had seroma, hematoma or skin necrosis. In control group(16 patients), there happened one seroma formation and one partial skin necrosis. These complications were healed by aspiration of seroma and wound revision. The patients' satisfaction was not statistically significant, but the higher points were given by the patients who underwent progressive tension suture. Conclusion: This technique, progressive tension suture, is an effective method to reduce or eliminate donor site seroma, which is the most common complication associated with latissimus dorsi muscle harvest.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.985-994
• /
• 1995

In this paper, we propose two hot standby architectures which not only provide high system availability but also lose little data on fault occurrence. In order to evaluate the performance of the proposed hot standby architectures, the warm standby architecture. In order to evaluate the performance of the propose d hot standby architectures, the warm standby architecture which is made from the hot standby architecture by eliminating its synchronization unit is considered. After system unavailability for each architecture is computed by using the corresponding Markov state diagram, the results are compared and evaluated. As the results, in most cases, hot standby architectures have higher availability than warm standby architecture. Also, hot standby architecture with external synchronization unit always maintains a little higher availability than hot standby architecture with internal synchronization unit. Active set time and personnel recovery rate for each architecture have little effect on system availability. However, in the case that data recovery time is too long, system availabilities of hot standby architectures and warm standby architecture degrade rapidly. In this case, the performance degradation of hot standby architectures is severe, and system availabilities of hot standby architectures eventually become lower than system availability of warm standby architecture.

• Korean Journal of Materials Research
• /
• v.1 no.3
• /
• pp.156-167
• /
• 1991

The purpose of this study is to develop a data base for material selection of turbofan engines, which is preferred in these days on many application due to their high performance with economical operation. Hundreds of Super Alloys have been developed by this time, each having special properties. Since it is very difficult task for a design engineer to select materials of adequate Properties for specific engine components, a good data bate is strongly desired to manage informations on various kinds of materials. However, no basic research is reported in this area so far in our country. The operating conditions such as temperature, pressure, rpm of spools are assumed to be provided by other mechanical studies. Creep rupture strength, corrosion resistance, yield strength, thermal expansion, melting point, etc., are considered as typical properties in this study to search a group of candidate materials. Formability, manufacturing or purchase cost can also be important variables to be considered. As a result of this study, a user-friendly computer program has been developed for input of new material information, interactive material selection, and output of selection results. Finally, discussion is presented from. the viewpoint of materials engineering. A method to evaluate the performance of the selected materials is also suggested.

• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.553-564
• /
• 2008

Generalizability theory was employed to examine how the reliability of polygraph test is affected by the number of relevant questions, the number of repeated tests (the number of of charts), and the number of raters(scorers). The data consisted of the results of the polygraph tests administered to 31 crime suspects. The sample was drawn from the real polygraph tests based on Backster ZCT and archived by the Prosecutor's Office of the Republic of Korea. The numerical scores assigned by thirteen raters to the test charts were analyzed to determine the generalizability of the scores. The largest variance component was accounted for by the examinee factor(43.97%) and the residual variance component was 16.84% of the total variance. The variance component due to the interaction between the examinee and the chart factors was 12.17% and the variance component due to the three way interaction of the examinee, the repeated test, and the relevant question factors was 10.31%. The generalizability coefficient for the current measurement procedure as practiced by the Korean Prosecutor's Office was 0.74 which suggests that the current procedure is acceptable. However, measurement procedures with the combination of more than two relevant questions, more than three repeated tests, and more than two raters were generally found to yield generalizability coefficients larger than 0.80. Therefore, such procedures need to be considered seriously in order to significantly improve the reliability of polygraph test.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.2
• /
• pp.159-183
• /
• 2001

The praying sentences of the script of Saddharmapundarika-sutra NO.5 which was made by prayer Bang-Ui, prince Ik-An, was investigated and the cover painting, Byonsangwha(Buddha's preaching painting), and letter style written in the script were discussed in this study. The cover painting on the script is known to be followed to the style of the cover painting as shown in a set of 7 rolls of Saddharma pundarika-sutra of the Horim Museum collection. It is not so difficult to say that the characteristics of cover painting of the script would be suceeded to those of scripts of the end of Koryo and the early Choseon Dynasty. Lotus and its surround was decorated with arabesque figure whose stems were drawn with golden paste and the arabesque figures were done with silver paste. However, for the expression of lotus and arabesque pattern the special feature of drawing style that was originated from the end of Koryo Dynasty to draw the outline with broad line and/or the hardness of drawing line became much more deepened than ever. It is not different to think that this characteristics should be those of Choseon Dynasty. On the Byeonsangwha(buddha's preaching painting) the painting of scattered flowers on stairs of Sumera-Mandala and the scheduled clouds (underseen from heaven) were as similar as to the Byeonsangwha style of the end of Koryo and the early Choseon Dynasty. However, the image of Shakyamuni and/or the halo(光背) is nearly same as the characteristics shown on the Beonsangwha of Saddharma pundarika-sutra of Nesosa' collection, a set of seven rolls which was completed in the 15th year of king Taejong(AD 1415). It is apparent that these characteristics are those of Choseon Dynasty. After king Chungsean in Koryo Dynasty, letter style of Chao Meng-Fu was shown in the script of late Koryo Dynasty as a new letter style.

• Science of Emotion and Sensibility
• /
• v.20 no.3
• /
• pp.109-118
• /
• 2017

This study examined the effects of button response to probe and irrelevant stimuli on P300 amplitude and lie detection rate in P300-based concealed information test. Participants underwent the P300-based concealed information test (P300 CIT) in two conditions. In one button condition participants were instructed to press the left mouse button only when the target was present. In two button condition, they were asked to press the left mouse button for target and right button for non-target. The results showed that the response time to target stimulus was not significantly different between the two conditions, and the response time to the probe stimulus was significantly longer than the irrelevant stimulus. The P300 amplitudes for the probe and irrelevant stimulus were all smaller in one button condition compared to two button condition. However, the P300 amplitude difference between the probe stimulus and the irrelevant stimulus did not show a significant difference in the two experimental conditions, and the lie detection rate did not differ significantly between the two conditions. Based on these findings, the effect of button response on P300 CIT with a short inter-stimulus interval was discussed.

• Journal of Korean Foot and Ankle Society
• /
• v.1 no.1
• /
• pp.59-64
• /
• 1997

The aims of free tissue transplantation to the injured foot are to cover the exposed blood vessels, nerves, muscles, tendons and bones, to clear up infection, to lessen the morbidity, to shorten the hospitalization, and to prepare for further surgical procedures when no local or transpositioning flaps are available. Authors have carried out free flap transplantation in 13 cases of crushing injury, osteomyelitis and electrical burn in the foot at Chonbuk National University Hospital from June 1992 through May 1996. The results were as follows : 1. 9 cases of 13 (69%) were sustained from the traffic accident. 2. The dorsalis pedis free flap transplantation has been performed most frequently in 5 cases (38.5%), followed gracilis muscle flap in 4 cases(30.7%), rectus abdominis muscle flap in 2 cases(15.4%), latissimus dorsi muscle flap and upper arm flap in 1 each. 3. 6 muscle flaps were covered with split thickness skin graft 20 days after microsurgical anastomosis. 4. All of 13 cases were survived after microsurgical procedure and showed excellent coverage in the foot.

• Archives of Reconstructive Microsurgery
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2002

Large soft tissue defects around the knee joint are known to significantly diminish joint function. Severe soft tissue defects on the anterior aspect of the knee joint especially bring on significant joint motion limitation. Although simple split skin grafts can cover the skin defect, the progressing scar contracture of the grafted skin causes joint stiffness. One of the best solutions of large soft tissue defects around the knee joint is covering the defect with a good quality skin flap. Separated flaps with one vascular pedicle are good candidates for covering anterior and posterior aspects of the joint for example. Authors performed 12 cases of combined scapular and latissimus dorsi free flaps from 1984 to 2000. Among them, we experienced 5 cases of knee joint defect covering using the double free flap for coverage of the soft tissue defect with preservation of the knee joint function and satisfactory results. The system of flaps based on the subscapular artery and vein provides a variety of composite free flaps. The possible flaps that can be harvested based on this single vascular pedicle include the scapular and parascapular skin flap, the serratus anterior and latissimus dorsi muscular flap, the lateral scapular bone flap, the latissimus dorsi-rib flap, and the serratus anterior-rib flap. This combined flap is available for multiple tissue defects or complex defects because it can be incorporated with skin, muscle and bone flaps. A main advantage is the independent vascular pedicles of each component, which allow freedom in orientation of each components. Consequently it can be freely applied to any form of three dimensional defects on the upper and lower extremities. The combination of scapular cutaneous flap and latissimus dorsi musculocutaneous flap can be resurfaced for massive cutaneous defects on the extremities. We report the use of the combined scapular and latissimus dorsi free flap in five patients to reconstruct massive defects on the extremities with resultant improved joint function. There was no flap failure and minimal complications and disadvantages. The anatomy of this flap is reviewed and the indication and advantages are discussed. All of the five flaps survived and there was no scar contracture affecting the joint motion.