• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.143-144
• /
• 2019

Recently, environmental pollution related to global warming is on the rise. Meanwhile, renewable energy is a representative example of many efforts to develop eco-friendly energy to solve the depletion of natural resources and the depletion of petroleum resources in conjunction with global warming. Among them, photovoltaic power generation is increasing the subsidies for the government to increase the production of photovoltaic electricity of the general public, showing a high growth rate. However, polysilicon, which is a raw material of the photovoltaic panel, generates waste called polysilicon sludge in the manufacturing process. In order to produce 1 ton of polysilicon, about 2 tons of waste polysilicon sludge is generated. In 2012, polysilicon sludge was generated at 78,000 tons, with an average of about 220 tons per day. The sludge generated due to insufficient treatment of polysilicon sludge is currently solidified and is processed by landfilling. Therefore, in this study, polysilicone sludge is used as the concept of admixture, and the physical properties of the matrix according to the polysilicon sludge replacement ratio based on light burned magnesia is determined.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.14-20
• /
• 2019

This paper presents a safety assessment based approach for the safe operation for PCS(Power Conditioning System) of photovoltaic and energy storage systems, applying FTA. The approach established top events as power outage and a failure likely to cause the largest damage among the potential risks of PCS. Then the Minimal Cut Set (MCS) and the importance of basic events were analyzed for implementing risk assessment. To cope with the objects, the components and their functions of PCS were categorized. To calculate the MCS frequency based on IEEE J Photovolt 2013, IEEE Std. 493-2007 and RAC (EPRD, NPRD), the failure rate and failure mode were produced regarding the basic events. In order to analyze the top event of failure and power outage, it was assumed that failures occurred in DC breaker, AC breaker, SMPS, DC filter, Inverter, CT, PT, DSP board, HMI, AC reactor, MC and EMI filter and Fault Tree was drawn. It is expected that the MCS and the importance of basic event resulting from this study will help find and remove the causes of failure and power outage in PCS for efficient safety management.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.356-365
• /
• 2022

Agrivoltaic systems, also called solar sharing, stated from an idea that utilizes sunlight above the light saturation point of crops for power generation using solar panels. The agrivoltaic systems are expected to reduce the incident solar radiation, the consequent surface cooling effect, and evapotranspiration, and bring additional income to farms through solar power generation by combining crops with solar photovoltaics. In this study, to evaluate if agrivoltaic systems are suitable for viticulture, we investigated the microclimatic change, the growth of vines and the characteristics of grape grown under solar panels set by planting lines compared with ones in open vineyards. There was high reduction of wind speed during over-wintering season, and low soil temperature under solar panel compared to those in the open field. There was not significant difference in total carbohydrates and bud burst in bearing mother branches between plots. Despite high content of chlorophyll in vines grown under panels, there is no significant difference in shoot growth of vines, berry weight, cluster weight, total soluble solid content and acidity of berries, and anthocyanin content of berry skins in harvested grapes in vineyards under panels and open vineyards. It was observed that harvesting season was delayed by 7-10 days due to late skin coloration in grapes grown in vineyards under panels compared to ones grown in open vineyards. The results from this study would be used as data required in development of viticulture system under panel in the future and further study for evaluating the influence of agrivoltaic system on production of crops including grapes.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.385-390
• /
• 2016

In our study, ceramics coatings by additives of nano alumina and magnesia have cured on 304 stainless steel at $170^{\circ}C$ 2h. We designed and experimented the coated specimens that were characterized by laser induced fluorescence spectroscopy using the charge coupled device and scanning electronic microscopy(SEM). The result was revealed the ceramic coatings added fillers has more excellent on adhesive property and scratch resistance, and less weight loss in acid solution than ceramic coatings non-added fillers. Therefore, this study has designed and manufactured the electromagnetic spectrometry with CCD and then analyzed the coatings on 304 stainless steel using the High Resolution Charge Coupled Device in improving the corrosion resistance of 304 stainless steel. Nowadays, coatings of stainless steel have increased by industrial demand in hygienes, aviation, instrumentations and robotics as the industry special application develops.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.75-82
• /
• 2011

Recently the technology of green growth became more important role among the problems of running out of fossil fuels and global warming. To procure a new growth power combined with energy and green growth, a lot of investment for wind power, photovoltaics system, fuel cell and biofuel expanded day by day. Among these, wing power has a merit of a highly economic and no discharge of toxic substance. These days government and industrial companies actively support the development of wind power technology with lots of investment, but domestic related education and equipment still stay in research level when it is compared with foreign advanced countries which lead the wind power technology. Therefore to expand the base of basic skill required in the related industrials and to advance technology, we are in the situation to be needed a development of a new curriculum and educational equipment which is analogous with the actual industrial system. In this paper a development of a new educational equipment for the learning of turbine control is introduced. This educational equipment has been developed for students to get easy understanding for the theory of wind turbine control. And finally to demonstrate the effect of the use of the developed equipments and curriculum a questionnaire carried out.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.665-676
• /
• 1996

Domestic metal mines have contributed to the national industrialization of Japan for over a century through their stable supply of raw materials. However, due to the changes which have taken place in the industries structure, mining industry has been shifted to downstream industries. At present, only three major mines are in production. In recent times, changing economic conditions have made it increasingly difficult to develop new base metal mines. Subsequently, the deposit type targeted has shifted from base metals to epithermal associated gold deposits which, if of sufficient grade and tonnage, can be economical. Accompanying the dramatic rise in the price of gold during the late 1970's, has been an increase in the geological information and our understanding of epithermal gold deposits around the Pacific rim region. In particular, the common acceptance of the plate tectonic theory and the correlation's between modem geothermal systems and fossil epithermal systems were most important developments. In 1988, the Mining Council authorized the domestic exploration of 19 districts, targeting epithermal gold mineralization. Since 1989 the Metal Mining Agency of Japan, semi-government organization, has been conducted gold exploration in such area. With new genetic concepts and new technologies, promising gold mineralization has been discovered. Two such areas which are at an advanced stage of exploration are Seta, in northern Hokkaido, and Noya, in central Kyushu.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.12-18
• /
• 2023

In 2018, the demand for silver (referred to as Ag) in the electrical and electronics sector was 249 million tons. The demand stood at 81 million tons in the solar module production sector. Currently, due to the rapid increase in solar module installation, the demand for silver is increasing drastically in Korea. However, Korea's natural metal resources and reserves are insufficient in comparison to their consumption, and the domestic silver ore self-sufficiency rate was as low as 2.2% as of 2021. This implies that a recycling technology is necessary to recover valuable metal resources contained in the waste plating solution generated in the metal industry. Therefore, this study compared and analyzed, the results of the impact evaluation through life cycle assessment according to an improvement in the process of recovery of valuable metals in the waste plating solution. The process improvement resulted in reducing GWP (Global Warming Potential) and ADP(Abiotic Depletion Potential) by 50% and 67%, respectively. The GWP of electricity and industrial water was reduced by 98% and 93%, respectively, which significantly contributed to the minimization of energy and water consumption. Thus, the improvement in recycling technology has a high potential to reduce chemical and energy use and improve resource productivity in the urban mining industry.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.258-258
• /
• 2016

최근 디스플레이 산업의 발전에 따라 고성능 디스플레이가 요구되며, 디스플레이의 백플레인 (backplane) TFT (thin film transistor) 구동속도를 증가시키기 위한 연구가 활발히 진행되고 있다. 트랜지스터의 구동속도를 증가시키기 위해 높은 이동도는 중요한 요소 중 하나이다. 그러나, 기존 백플레인 TFT에 주로 사용된 amorphous silicon (a-Si)은 대면적화가 용이하며 가격이 저렴하지만, 이동도가 낮다는 (< $1cm2/V{\cdot}s$) 단점이 있다. 따라서 전기적 특성이 우수한 산화물 반도체가 기존의 a-Si의 대체 물질로써 각광받고 있다. 산화물 반도체는 비정질 상태임에도 불구하고 a-Si에 비해 이동도 (> $10cm2/V{\cdot}s$)가 높고, 가시광 영역에서 투명하며 저온에서 공정이 가능하다는 장점이 있다. 하지만, 차세대 디스플레이 백플레인에서는 더 높은 이동도 (> $30cm2/V{\cdot}s$)를 가지는 TFT가 요구된다. 따라서, 본 연구에서는 차세대 디스플레이에서 요구되는 높은 이동도를 갖는 TFT를 제작하기 위하여, amorphous In-Ga-Zn-O (a-IGZO) 채널하부에 화학적으로 안정하고 전도성이 뛰어난 SnO2 채널을 얇게 형성하여 TFT를 제작하였다. 표준 RCA 세정을 통하여 p-type Si 기판을 세정한 후, 열산화 공정을 거쳐서 두께 100 nm의 SiO2 게이트 절연막을 형성하였다. 본 연구에서 제안된 적층된 채널을 형성하기 위하여 5 nm 두계의 SnO2 층을 RF 스퍼터를 이용하여 증착하였으며, 순차적으로 a-IGZO 층을 65 nm의 두께로 증착하였다. 그 후, 소스/드레인 영역은 e-beam evaporator를 이용하여 Ti와 Al을 각각 5 nm와 120 nm의 두께로 증착하였다. 후속 열처리는 퍼니스로 N2 분위기에서 $600^{\circ}C$의 온도로 30 분 동안 실시하였다. 제작된 소자에 대하여 TFT의 전달 및 출력 특성을 비교한 결과, SnO2 층을 형성한 TFT에서 더 뛰어난 전달 및 출력 특성을 나타내었으며 이동도는 $8.7cm2/V{\cdot}s$에서 $70cm2/V{\cdot}s$로 크게 향상되는 것을 확인하였다. 결과적으로, 채널층 하부에 SnO2 층을 형성하는 방법은 추후 높은 이동도를 요구하는 디스플레이 백플레인 TFT 제작에 적용이 가능할 것으로 기대된다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.134-134
• /
• 2017

전북지역의 130여개 스마트온실 중에서 주요한 10여개의 주요 온실에 대한 온습도, 이산화탄소, 광센서 및 기타 센서의 사용실태에 대한 조사를 수해하였다(2016년 9월~12월). 온실의 선정은 온실의 종류(비닐/유리)와 복합제어기 종류(국산/외산)를 중심으로 조사하였다. 국내외 업체의 장단점, 스마트기기의 활용과 문제점, 클라우드 기반의 3세대 한국형 스마트온실의 적용기반에 대한 조사를 수행하였다. 융복합 제어기와 센서는 자체의 신뢰성 이외에 운용상의 알고리즘 차이에서 오는 문제로 인해 농가에서 측정결과에 대한 신뢰성이 낮고, 측정이 부정확하고 일일측정 데이터에 대한 활용이 어렵고, 설정 값을 사용자가 직접 계산하고 값들을 입력해주어야 한다는 단점에 대한 의견이 대부분이다. 외국 제품은 데이터 측정값의 활용이 용이하고 복합 환경 상황에 알맞게 자동 계산 시스템이 체계적으로 작동하여 제어에 반영되며 국내 업체 설정 값의 범위보다 세밀하게 설정이 가능하다는 장점이 있으나 설치비용이 국내대비 3~4배 높고 고장 시 A/S가 느린 편이며 영어로 구성된 복잡한 시스템이기 때문에 100% 활용하기 어렵다는 단점이 있다. 스마트기기 활용은 복합 환경제어를 하는 농가이면 국내 업체와 외국 업체 모두 활용하고 있으며 주로 스마트 폰으로 사용되고 전용 어플이 아닌 PC원격 제어 소프트웨어인 팀뷰어(Teamviewer)를 이용하여 복합제어기 PC를 직접 조작하여 사용한다. 클라우드 활용으로는 복합환경제어기 회사에서 작물별 제어 방법과 데이터 정보를 제공하지 않는 점에 대한 농가의 불편함이 많은 편으로 작물별 농사방법이 많고 지역별 농사방법이 다르기 때문에 조사한 전북지역의 농가 10곳 모두 클라우드를 사용하지 않는 것으로 조사되었다. 다양한 온실 및 생육환경에 따른 표준화된 운영의 문제점을 개선하여 스마트팜에서 중요한 역할을 수행하는 복합센서의 표준시험방법과 절차를 개발하여 관련산업의 발전에 응용할 필요성이 있으며 단순한 하드웨어의 표준화 또는 개선방향보다는 농가의경험과 누적된 토양,작물 등의 재배 생육정보를 이용한 작물생육모델과 온실모델의 일치를 통해 센서-생육환경예측-검증방법의 포준화가 필요한 것으로 사료된다.