• Korean Journal of Optics and Photonics
• /
• v.35 no.3
• /
• pp.107-114
• /
• 2024

In this study, the feasibility of using the covariance-matrix-adaptation-evolution-strategy (CMA-ES) algorithm in a multichannel coherent-beam-combining (CBC) system was experimentally verified. We constructed a multichannel CBC system utilizing a spatial light modulator (SLM) as a multichannel phase-modulator array, along with a coherent light source at 635 nm, implemented the stochastic-parallel-gradient-descent (SPGD) and CMA-ES algorithms on it, and compared their performances. In particular, we evaluated the characteristics of the CMA-ES and SPGD algorithms in the CBC system in both 16-channel rectangular and 19-channel honeycomb formats. The results of the evaluation showed that the performances of the two algorithms were similar on average, under the given conditions; However, it was verified that under the given conditions the CMA-ES algorithm was able to operate with more stable performance than the SPGD algorithm, as the former had less operational variation with the initial phase setting than the latter. It is emphasized that this study is the first proof-of-principle demonstration of the CMA-ES phase-control algorithm in a multichannel CBC system, to the best of our knowledge, and is expected to be useful for future experimental studies of the effects of additional channel-number increments, or external-phase-noise effects, in multichannel CBC systems based on the CMA-ES phase-control algorithm.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.340-346
• /
• 2000

Traveling wave type semiconductor optical amplifiers integrated with spot-size-converter (SSC-TW-SOA) have been extensively studied for the improvement of coupling effiClency With single-mode fiber and fO! the cost reducClon 111 a packaging In tlIis paper the slructural dependence of the spot-slZe-converter on the effective facet reflectlvllY $R_{eff}$ was experimentally as well as thcoretienlly mvestlgated. It was shown that not only a sufficient mode-conversion in a sse region along the latersl and tran~verse directions but also an introductIOn of angled-facet were very essential in order to reduce $R_{eff}$ Very small ripple less than 0.1 dB in an amplified spontaneous emission spectrum was observed with the fabncated SSC-lW-SOA which consists of the wrndow length of $20\mu\textrm{m}$, facet angle of $7^{\circ}$, and antlrelleetioll-coated facet of ] % reflectivity.tivity.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.216-220
• /
• 2007

A widely tunable add/drop filter composed of double ring resonators is implemented with high-index-contrast polymer waveguide. To enhance the productivity, directional couplers are designed to have good fabrication tolerance. The refractive indices of the core and cladding in the 1550 nm wavelength are 1.51 and 1.378, respectively. Drop response in comparison with neighborhood peak gets enhanced by more than 2.9 dB at the wavelength where both rings resonate. This filter can be used to build widely tunable laser diode through hybrid-integration with reflective SOA.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.248-255
• /
• 2006

Most optical security systems use a 4-f correlator, Mach-Zehnder interferometer, or a joint transform correlator(JTC). Of them, the JTC does not require an accurate optical alignment and has a good potential for real-time processing. In this paper, we propose an image encryption system using a position shift property of the JTC in the Fourier domain and a random phase image. Our encryption system uses two keys: one key is a random phase mask and the other key is a position shift factor. By using two keys, the proposed method can increase the security level of the encryption system. An encrypted image is produced by the Fourier transform for the multiplication image, which resulted from adding position shift functions to an original image, with a random phase mask. The random phase mask and position shift value are used as keys in decryption, simultaneously. For the decryption, both the encrypted image and the key image should be correctly located on the JTC. If the incorrect position shift value or the incorrect key image is used in decryption, the original information can not be obtained. To demonstrate the efficiency of the proposed system, computer simulation is performed. By analyzing the simulation results in the case of blocking of the encrypted image and affecting of the phase noise, we confirmed that the proposed method has a good tolerance to data loss. These results show that our system is very useful for the optical certification system.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.247-253
• /
• 2019

In this study, compounds with azo-mesogenic groups at 4-, 3,5-, or 3,4,5-positions of one phenyl ring were synthesized, and their liquid crystallinity and photochemistry were investigated. The compounds in the Azo1 and Azo2 series had linear and planar geometries, respectively, while those in the Azo3 series had relatively bulky structures. Compounds of BA-Azo2 and BA-Azo3 did not show any liquid crystallinity. Compounds of BE-Azo1 and BE-Azo2 exhibited a monotropic liquid crystallinity, while the other compounds showed an enantiotropic liquid crystallinity. The liquid crystalline behavior was imparted by the azo-mesogenic groups, and most of the liquid crystalline compounds formed a smectic phase. All the RM-AzoX compounds exhibited photoisomerism because of the presence of the azo groups in the molecule. The rate of photoisomerization followed the order of RM-Azo3 < RM-Azo1 < RM-Azo2 and was considered to depend on the steric hindrance around the azobenzene groups in the molecule. These results suggest that the liquid crystallinity and photochemical property of the compounds are affected by the position or the number of azo-mesogenic groups phenyl ring of the molecule.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.350-355
• /
• 2011

A soluble polyamide containing photosensitive l,4-phenylenediacrylic acid (PDA) in main chain with biphenyl moiety was synthesized. The chemical structure of synthesized polyamide was investigated by means of $^1H$ NMR spectroscopy. The polymer was stable up to $280^{\circ}C$ and soluble in organic solvents, giving a good quality of thin films. The photoreaction of unpolarized LTV irradiated films was investigated by means of UV-vis absorption spectroscopy and FTlR spectroscopy, and liquid crystals (LCs) alignment property was examined by exposing to linearly polarized UV light (LPUVL) of 260~380 nm. The polyamide in film has excellent photoreactivity to unpolarized UV light. Direction selective photoreaction of PDA moiety in Lhe film was found to further induce nematic liquid -crystals to align along a perpendicular direction with respect to the electric vector of LPUVL, regardless of exposure energy of LPUVL. In addition, pretilt angle was measured by means of crystal rotation method. LPUVL-exposed polymer film induced the alignment of liquid-crystals (LC) with a pretilt angle of 0.2~$0.5^{\circ}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.338-338
• /
• 2012

사파이어 ($Al_2O_3$)는 높은 밴드갭 에너지 (~19.5 eV)를 가진 물질로서 우수한 내마모성, 강도, 전기 절연성 및 안정한 화학적 특성을 갖고 발광다이오드 기판, 보석재료 등 각종 산업 및 기술적 분야에서 널리 사용되고 있다. 특히, 플립칩 발광다이오드 구조의 경우 광추출효율을 향상시키기 위해 높은 투과도를 갖는 사파이어 기판이 요구되어 왔으며, 지금까지 건식/습식식각방법을 이용한 사파이어 표면에 마이크로 크기의 심한 거칠기 또는 요철이 형성된 나노크기의 격자구조를 형성시키는 연구가 진행되어 오고 있다. 그 중, 나노 크기의 격자구조는 공기에서 반도체 기판까지 선형적인 유효굴절률 분포를 갖기 때문에 표면에서 생기는 Fresnel 반사 손실을 줄일 수 있다. 이러한 구조를 형성하기 위해서는 식각 마스크가 필요한데, 형성 방법으로 레이저 간섭 리소그래피, 전자빔 리소그래피, 나노임프린트 리소그래피 등이 있으나, 비싼 가격과 복잡한 공정 절차 등의 단점을 지니고 있다. 따라서 본 연구에서는 식각 마스크 패턴을 위해, 보다 저렴하고 간단한 실리카 나노구 및 열적응집 금 나노 입자를 이용하였다. 양면 폴리싱 c-plane 사파이어 기판을 사용하였고, 단일 층의 주기적인 실리카 나노구를 기판 표면에 스핀코팅에 의해 도포한 후 유도결합플라즈마 식각 장비를 이용하여 식각하여 주기적인 패턴을 갖는 렌즈모양의 격자구조를 형성하였다. 그리고 주기적으로 형성된 격자 위에 열 증착기를 이용하여 금 박막을 증착한 후 급속열적어닐닝(rapid thermal annealing)을 이용하여 열처리함으로써 비주기적인 금 나노입자를 형성시켰다. 형성된 금 나노패턴을 이용하여 동일한 조건으로 식각함으로써 광대역 및 전방향성 높은 투과도를 갖는 원뿔 모양의 사파이어 나노구조를 제작하였다. 제작된 샘플의 패턴 및 식각 형상은 전자현미경을 사용하여 관찰하였으며, UV-vis-NIR 분광광도계 (spectrophotometer)를 사용하여 투과율을 측정하였다. 렌즈 모양 표면 위에 원뿔모양의 나노구조를 갖는 사파이어 기판은 일반적인 사파이어 기판보다 향상된 투과율 특성을 보였다.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.335-341
• /
• 2002

In this paper, we investigated a novel UV sensor using evanescent field coupling between the side polished fiber and photo-functional polymer waveguide. It was found that resonant wavelength shifts occur due to variation in the refractive index of polymer planar waveguide for its photo-functional properties on exposed UV. Spiroxazine (photochromic dye) was used as the planar waveguide. The resonant wavelength responses were exhibited at 1.44 nm/mW, 1.64 nm/mW, and 1.78 nm/mW when UV irradiations were exposed for 20 seconds, 30 seconds, and 40 seconds, respectively. The recovery time of sensor was independent of UV exposure power and 90% recovery time was 100 seconds.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.441-447
• /
• 1985

Several benzanilides were prepared by acylation of anilines with substituted benzoyl chlorides. While 2-chlorobenzanilides were photocyclized, 2-methylbenzanilide and 2'-methylbenzanilide were cleaved to give photo-Fries type products. 2-Nitrobenzanilide and 2'-nitrobenzanilide were inert in the above conditions due to lowering energy of the excited state by the nitro group. N, N-dibenzoylaniline and N, N-di-(2-chlorobenzoyl) aniline gave photo-Fries type reaction products effectively. In the benzanilide photo-Fries type reaction the excited singlet state was believed to be involved, since no oxygen effect was observed on the reaction rate. Quantum yield for 2-methylbenzanilide is higher in nonpolar and less viscous solvents than in polar and viscous solvents. The solvent cage radical pair is suggested in the photo-Fries type reaction of benzanilides.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.61-70
• /
• 1999

An optical switch composed of three-identical, equally-spaced $Ti:LinbO_3$ waveguides and overlaid Al electrodes of CPW structure was designed and fabricated. Patterned Ti was diffused into z-cut $LinbO_3$ substrates at $1025^{\circ}C$ for 6 hours to make a three-waveguide directional coupler. $SiO_2$ buffer layer of $1.2{\mu}m$ was grown by the PECVD to reduce the propagation loss of TM mode, and Al electrodes were built on the layer for switching the guided beam. For an incident beam of ${\lambda}=1.3{\mu}m$, almost perfect optical coupling between two outer waveguides was observed. When an electric field was applied to detune the three waveguides anti-symmetrically, the optical switching phenomenon was successfully confirmed.