• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.89-94
• /
• 2015

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and thet of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.92.1-92.1
• /
• 2015

열전소재의 열전성능을 평가하기 위해서는 샘플 내 상하부 온도구배가 필요하다. 하지만 진공챔버 내에서는 대류효과가 제한되어, 1 mm 이하 두께의 얇은 샘플은 상하부 방향으로 온도 구배를 조성하기 어렵다. 온도 구배를 조성하기 위해서는 샘플의 두께 방향을 관통하는 열유속이 필요하며, 진공 분위기에서 열유속을 조성하기 위해서는 히터뿐만 아니라 별도의 열배출기가 요구된다. 본 연구에서는 열전특성 측정 장비 내 수냉식 열배출기의 설계를 위해, 열배출기의 층수를 달리하며 열전달거동을 수치해석적인 방법으로 연구하였다. 열배출기의 층수에 따른 영향을 평가하기 위해서 동일한 채널길이를 유지시키면서 층수를 달리하는 기하학적인 구조들을 설계하였다. 수치해석을 용이하게 진행하기 위해, 열배출기의 형태는 단순한 bar 형태를 가진 1-5층의 다층 구조 로 설계하였다. 열배출기들 각각의 열전달 효율을 평가하기 위해, 수냉식 열배출기의 열배출량에 가장 큰 영향을 미치는 질량유량을 0.1-1 g/s로 변화 시키면서 열전달 거동을 확인하였다. 또한 냉각수의 기화 현상을 방지하기 위해 발열체의 온도를 290-370 K로 바꿔 가며 열전달 거동을 확인하였다. 수치 해석결과, 5층의 열배출기가 최대 120 W/cm2 로 높은 단위면적당 열배출량을 가지는 것을 확인하였으나, 열배출기 전체의 열배출량을 기준으로하는 열배출효율은 0.6 정도로 낮은 효율을 가짐을 확인하였다. 반면에 3층의 열배출기의 경우, 열배출 효율이 0.8에 달하며, 2층의 열배출기 보다 열배출 효율이 좋다는 것을 확인할 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2003

An eddy current testing system was developed for detection of flaws in the ferromagnetic steel tubes. Because the eddy current signals from the ferromagnetic steel tubes could be distorted easily due to an irregularity of magnetic permeability, magnetic saturation is required to suppress this variation of magnetic fields. A magnetic saturation probe with the Hemholtz coil was designed for the inspection of the steel tubes. The bandwidth pass filters were adapted to minimize the noise from the DC magnetization. When using the designed test probe, the flaw signals could be discriminated from the noise. The system was tested at the production line and showed a capability of detecting flaws, like a drilled hole of the diameter of 2.0mm at the moving speed of 1m/sec.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.4
• /
• pp.63-74
• /
• 1989

It is well-known that the fuel injection system if a diesel engine has taken a more important place in understanding of diesel combustion process with combustion chamber. But a diesel fuel injection system has an assembly of many complex and intricate problems such as the desired rate of injection, secondary injection and injection pump etc., in addition to the atomization for ignition and combustion, the penetration and diestribution for proper utilization of air. The analysis is carried out by simplifing and modeling the injection phenomena and dividing into three parts comprising of fuel injection pump, high pressure pipe and fuel injection nozzle. The purpose of this paper is to describe an analytical simulation of the injection system and to speed up the work of developing injection systems for new engines. The effects of important injection parameters as predicted by the present model are found to be in good agreement with experiment. It can be seen that there is an optimal pipe diameter for maximum quantity injected.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1040-1047
• /
• 2002

In this paper, we investigated noise decoupling on the power bus by the screw connection, used to the mechanical join and grounding of the PCB ground to chassis. The screw connection penetrates the power bus and then it affects noise propagation on the power bus. To verify effect of the screw connection, we compare bare board with board having screws connection with 0.5 mm separation between power bus and chassis. From these results, we observed that the power bus noise was decreased about 5 dB at the frequency range from 0.1 GHz to 1 GHz. Also, we verified that a 4-layer PCB with signal trace had the better signal quality up to 600 MHz by the screw connection. Therefore, these results will be useful in designing to the high speed circuit and chassis.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2012

After flash memory card(FMC) was manufactured by $B^2it$ process, interfacial reaction of silver bump with thermal stress was studied. To investigate bonding reliability of Ag bump, thermal shock and thermal stress tests were conducted and then examined on the crack between Cu land and Ag bump interface. Diffusion reaction of Ag bump/Cu land interface was analyzed using SEM, EDS and FIB. The Ag-Cu alloy layer due to the interfacial reaction was formed at the Ag/Cu interface. As the diffusivity of Ag ${\rightarrow}$ Cu is faster than Cu ${\rightarrow}$ Ag, a lot of (Cu, Ag) alloy layers were observed at the Cu layer than Ag. These alloy layers contributed to increase the Cu-Ag bonding strength and its reliability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.169-174
• /
• 2011

Acoustic emission (AE) signals were detected and analyzed in real time during the polymerization shrinkage of composite resin restoration in an artificial dental ring with a class I cavity. Most AE hit events were observed in the initial curing period of the 1st region with high contraction rate. The range of the $2^{nd}$ region for the stainless steel specimen was shorter than that for the PMMA specimen but longer than that for the human dentin specimen. AE hit events showed a blast-type signal having an amplitude in the range of 25.45 dB and a frequency band of 100.200 kHz or 240.300 kHz. These values of amplitude and frequency indicated the fracture of resin or of the adhesive layer.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.285-293
• /
• 1994

The transport of radionuclides in a compacted bentonite is dominated by diffusion. Through-diffusion tests for iodide were performed to investigate the diffusion characteristics of anionic radionuclides in a domestic bentonite. The bentonite used was sampled from the southeastern area of Korea and the solution was synthetic groundwater spiked with a tracer of I -125(as Na$^{125}$ I). The dry densities of compacted bentonite were 1.2, 1.4, and 1.7 Mg/㎥. The apparent diffusion coefficients and the effective diffusion coefficients of the iodide decrease with increasing dry density. The values were from 3.80 to 7.12$\times$10$^{-11}$ $m^2$/s for the apparent diffusion coefficients and from 1.25 to 7.97$\times$10$^{-12}$ $m^2$/s for the effective diffusion coefficient, respectively. The experimental results also showed that the apparent diffusion coefficients depended on the pore structure of compacted bentonite and the effective diffusion coefficients were attributed to the pore structure and the effective porosity that represents the available pathway for the diffusional transport of iodide. The results obtained will be used as basic data for the safety assessment of a repository.

• Korean Journal of Environment and Ecology
• /
• v.27 no.1
• /
• pp.85-98
• /
• 2013

In order to propose effective conservation management plan, this study verified ecological characteristics, humanities and Social characteristics. The research site is private property which is owned belonging to the Kim's of Gimhae that have long history. The study site is more than a thousand years old and was created for protecting from typhoon. There held the religious ritual what is called Dongsinje until 1960s. There have been protected and managed by the villagers. As the results of analysis, the area of windbreak are $12,392.69m^2$. The windbreak is dominated old years deciduous broad-leaved tree such as Zelkova serrata, Celtis sinensis, Aphananthe aspera. Around there were farmlands(52.1%), urbanized area(26.3%), forest area(16.6%). The vegetation communities of windbreak were classified by considering the dominant species and current status of forest. The forest types are following as; A. aspera community(I) which is using less pressure, Platycarya strobilacea-Carpinus coreana-Z. serrata community(II). Z. serrata community(III) which is using high pressure, Z. serrata-A. aspera community(IV), Z. serrata community(V) which is damaged under canopy trees. The windbreak was in good condition whereas, there were concerns the some wrong status was being undermined such as the wrong forest restoration projects in the past, the trails that is penetrating inside the forest, building up education facilities. Therefore, in order to restore the value of windbreak what is so called Suwol forest, we should improve the problems of forest ecosystem such as wrong management, forest fragmentation by facilities and decline in forest by lack of growing the next generation trees. In addition, we should remove excessive resting facilities and lead to passive use of forest. to improve the way of wrong management, moreover, we should close off he trails that is penetrating inside the forest for improving fragmentation. We should restore vegetation restoration and fostering the next generation trees for forest ecosystem. In order to restore unique of histo-cultural and ecological forest landscape, the next generation trees should be grown up that is the dominant species in Suwol forest. Moreover, as a results of comparing the between good vegetation communities and damaged vegetation communities, it is necessary to complementary planting for demeged vegetation communities, therefore there needs to 10.8 under canopy trees, 79.7 shrubs.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.215-233
• /
• 2016

Timelapse which was appeared Georges Mellieoseu in 1897 was not familiar to people and was not popular in film or broadcast industry in spite of long history. But about 5 years ago, timelapse has become distinguished in all around image art, because it show us aesthetic extraction of time and variation of color in Vimeo and Youtube which neve been seen before. So nowadays latest camera has come out with default menu which can shoot timelapse. But popularity of timelapse seem not development of cinematography technique or appearance of new function but production of image which reflects ages of present with fully accept digital media property. This study is approached from two formative characteristics. First it is strengthen of time which is showed timelapse and analog media from a comparison angle. Second, it is how to extend their sense and imitate images through resolution which can be possible high quality image and color especially with Raw data Through these methodology, this study defines correlation of character of digital media and artistic value of images in timelapse. And also it cleary assures the era of penetrating art has not only visual amusement as known but, also representative value of our ages and technology of media.