• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.73-81
• /
• 1998

The effect of vertical or horizontal throughflow on natural convection in horizontal porous layer was investigated. The computations were performed by employing Darcy-Brinkman-Forchheimer equation to consider the effect of inertia and viscous effect. The patterns of streamlines and isotherms are observed by changing the strength of throughflow. The vertical throughflow stabilizes the natural convection in porous layer. It also disturbs the developing vertical and horizontal velocity component of natural convection cell and increases the critical modified Rayleigh number. The horizontal throughflow influences the stabilization of natural convection in porous layer much more than the vertical throughflow. And it changes a stable convection into a oscillatory convection.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.296-301
• /
• 1996

이 연구의 목적은 원주방향 균열을 가진 페라이틱 배관의 파괴거동을 실험적으로 평가하는데 있다. 한계하중방법, SC.TNP 방법, R6방법, 그리고 ASME Code방법과 같은 여러 파괴거동 평가 방법의 타당성이 PWR 운전조건(압력:15.5MPa, 온도:228$^{\circ}C$)하에서의 직경 16인치의 대규모 배관파괴실험을 통해 조사된다. 모사지진하중, 단일주파수 사인함수하중, 정하중과 같은 여러 가지 형태의 하중이 배관의 하중지지능력에 미치는 영향이 조사된다. 또한 엘보우부위와 직관부의 영향과 표면균열 및 관통균일의 영향 등도 함께 조사된다. 결과는 다음과 같다. (1) 표면균열을 가진 배관의 파괴거동은 한계하중방법과 SC.TNP 방법에 의해 잘 예측할 수 있다. 반면 관통균열의 경우는 한계하중방법에 의해 잘 예측된다. (2) 모사지진하중하에서는 단일주파수 사인함수하중이나 정하중 하에서 보다 하중지지능력이 크게 예측된다. (3) 엘보우부위와 직관부, 관통균열과 표면균열 사이에 파괴거동에 대한 큰 차이는 없다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.63-68
• /
• 2002

본 논문에서는 관통형 고주파 노이즈 필터(noise filter)를 설계하고, 제작하였다. 분포정수형(distributed constant type) 노이즈 필터는 세라믹 다층 구조(multi-layer)를 가지며, 기존의 노이즈 억압 방법인 칩 페라이트 비드, 3단자 커패시터 그리고 집중 정수형(lumped constant type) 노이즈 필터에 비해 신호의 왜곡이 적고, 고주파 노이즈 억압특성이 우수하다. 본 논문에서는 기존의 분포정수형 노이즈 필터에 관통형 via-hole을 삽입하는 새로운 구조를 제안하였다. 제작된 노이즈 필터는 100MHz의 차단 주파수, 700MHz~1700MHz에서 20㏈이상의 감쇠 특성을 나타내었다. 또한, 기존의 노이즈 필터의 단점인 방향성 덴 공정에 대한 민감도를 개선시킴으로써 양산성이 향상되었다.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.227-229
• /
• 2006

3차원 실장을 하기 위해서 딥핑 방법으로 전기적 신호를 전달할 수 있는 비아를 가진 실리콘 웨이퍼를 제작하였다. 레이저를 이용하여 실리콘 웨이퍼에 개구부가 원형에 가까운 관통 홀을 형성하였다. 관통 홀의 벽에 도금 방법으로 시드 층을 형성하였다. 관통 홀의 충전 금속은 Sn-3.5Ag-0.7Cu 솔더를 사용하였다. 딥핑 방법으로 시드 층과 솔더 사이의 확산 현상 이용하여 전기적 신호를 전달 할 수 있는 비아를 형성하였다. 비아 내부에 일부 기공과 크랙이 발견되기도 했으나 딥핑 방법을 통해서 빠른 시간 내에 비아를 가진 실리콘 웨이퍼를 제작 할 수 있었다.

• Journal of Chest Surgery
• /
• v.33 no.7
• /
• pp.581-584
• /
• 2000

Because the penetrating cervical tracheoesophageal injury may be associated with significant morbidity and mortality, it is important to choose the optimal method of diagnosis and management in patient with tracheoesophageal injury. We obtained a satisfactory result from repair of tracheoesophageal injuries using cardiopulmonary bypass. If the bleeding from the unidentified deep injury and the spread of infection could be controlled, the repair using CPB might increase the margin of safety during operation in the similar cases.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.18.2-18
• /
• 1983

Children constitute a large majority of patients with foreign bodies in the nose. Adults with foreign bodies in the nose are usually mentally disturbed, and may be the victims of penetrating injuries or of operation on the nose. Foreign bodies enter the nose through the anterior naris, posterior naris, penetrating wound, $.$$.$$.$$.$ etc. Authors experienced a case of the broken pencil, 3.5cm in length, which entered the nose through the cheek and stayed there for 4 days.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.355-362
• /
• 2020

EFP composed of explosive, charge and liner generally penetrates standoff a target by Monroe effect. Its performance highly depends on penetrator characteristics and flight stability. Penetration ability can be dramatically reduced when the penetrator reaches the target with AOA, even if the penetrator has high kinetic energy and L/D ratio. Therefore, it is important to research not only penetrator characteristics and but also flight stability. In this work, the effect of liner shape on penetrator characteristics was examined using free flight test and numerical tools. It was found that tip velocity of penetrator was increased with decreasing liner thickness. It was also found that thicker liner had higher static margin leading to better flight status.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.175-177
• /
• 2011

오늘날 반도체 소자의 성능을 좌우하는 배선폭은 수십 나노미터급으로 배선폭 감소에 의한 소자의 집적은 한계에 다다르고 있다. 또한 2차원 회로 소자의 문제점으로 지적되는 과도한 전력소모, RC Delay, 열 발생 문제등도 쟁점사항이 되고 있다. 이런 2차원 회로를 3차원으로 쌓아올린다면 보다 효율적인 회로구성이 가능할 것이고 이에 따른 성능향상이 클 것이다. 3차원 회로 구성의 핵심기술은 기판을 관통하여 다른 층의 회로를 연결하는 실리콘 관통 전극을 형성하는 것이다.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.433-439
• /
• 1996

From January 1980 to July 1995, 32 patients with blunt diaphragmatic trauma and 12 wish penetrating diaphragmatic trauma were treated at Kyungpook University Hospital. The mean age of patients with blunt trauma was 37.6 years, and with penetrating trauma 29.2 years. The mean age was older in patients with blunt trauma by 8.4 years (p< 0.05). When simple chest X-ray diagnosis was performed, 24cases (75%) of the diaphragmatic injuries were found in blunt trauma and 4 case(33%) in penetrating trauma. When opei.ations were done due to injuries of thoracic or abdominal organ, 7 diaphragmatic injuries (58%) were found in penetrating trauma. Herniation occurred in 24 patients (75%) in blunt trauma and 5 patients (42%) in penetrating truma. The size of injured diaphragms in 29 cases in which hernia was discovered was 10.9 $\pm$ 4.3cm. On the other hand, the size in 15 cases in which hernia did not occur was 3.5 $\pm$ 2.9cm. There was a remarkable difference in their size depending on the presence or absence of hernia (p< 0.051. That is, a close relation between the sire of injured diaphragms and hernia was shown. All diaphragmatic injuries were repaired primarily. In blunt trauma approach of repair were as follows : 20 (63%) thoracic, 9 abdominal, 2 thoracoabdominal, and 1 thoracic and in penetrating trauma 6 (50%) abdominal, 4 thoracic, and 2 thoracic and abdominal. The complication rate was 19% in blunt trauma and 25% in penetrating trauma. Two patients with blunt trauma died with a mortality rate of 6.3% . All patients with penetrating trauma recovered. This study suggests that diaphragmatic injury should be suspected in all patients w th blunt as well as penetrating injury of the chest and abdomen. The size of injured diaphragms was larger in blunt trauma than in penetrating trauma. For herniation, it appeared to be more common in blunt trauma. The morbidity and mortality were related primary to the severity of associated injuries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1329-1335
• /
• 2011

On the basis of detailed 3D finite-element (FE) limit analyses, the plastic limit load solutions for pipes with slanted circumferential through-wall cracks (TWCs) subjected to axial tension, global bending, and internal pressure are reported. The FE model and analysis procedure employed in the present numerical study were validated by comparing the present FE results with existing solutions for plastic limit loads of pipes with idealized TWCs. For the quantification of the effect of slanted crack on plastic limit load, slant correction factors for calculating the plastic limit loads of pipes with slanted TWCs from pipes with idealized TWCs are newly proposed from extensive 3D FE calculations. These slant-correction factors are presented in tabulated form for practical ranges of geometry and for each set of loading conditions.