• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.37-47
• /
• 1995

본 논문은 마찰력을 측정하는 시스템에 동특성 변화를 주어서, 이에 의해 발생하는 마찰현상의 변화와 수직하중의 변동특성에 관하여 측정을 하였으며, 미끄럼속도 및 하중조건 변화와 미끄럼운동을 하는 두물체 재료조합 변화에 따른 상기의 마찰특성변화에 관하여 실험적 및 이론적 고찰을 행하였다. 시스템의 동특성 변화를 주기 위하여 시스템의 강성(Stiffness)의 변화를 주었고, 또한 수직 하중 부과 방법을 Dead weight를 이용한 방법과 공압(Pneumatic)에 의한 방법을 비교함으로써 관성력 및 감쇠(Damping) 특성에 변화를 주었다. 시험 대상의 물체들은 강(Steel) 및 폴리머류의 Rosin과 PTFE를 선정하여, 재료변화에 따른 마찰특성 변화를 유도하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.38-51
• /
• 1984

Mononobe-Okabe에 의해서 옹벽에 대한 동적 토압계산법이 개발된 이래 본론두중 옹벽의 과동에 의한 변위에 대해서는 많은 연구가 이루어졌으나 Mononobe-Okabe식이 원래 옹벽 자체의 관성을 고려치 아니하였고 또 동적 하중의 작용점을 제시하지 않으므로서 전도모멘트를 계산할 수 없게 하므로서 옹벽의 전도에 의한 변위에 대해서는 연구가 되지 아니하였다. 본 연구의 목적은 해석적 방법과 모형실험을 통해서 지진 및 폭파 등의 동적 하중에 의한 옹벽의 전도에 의한 변위를 고찰하고자 하는 바 그 결과를 요약하면 다음과 같다. 1. 활동에 대한 항복가속도가 있는 것과 마찬가지로 전도에 대한 항복가속도가 있다. 이 항복가속도는 옹벽의 안전율이 증가함에 따라 증가한다. 2. 이론치와 실험치는 경향으로 보아 일치한다. 실험치가 이론치보다 작은 것은 모형실험에서 옹벽측면과 컨테이너 사이의 마찰에 기인한 것으로 보아지며 마찰을 줄임으로써 이론치에 더 접근시킬 수 있을 것이다. 3. 옹벽의 회전각도의 크기는 지반가속도가 클수록, 옹벽저면이 작을수록 그리고 흙의 내부마찰각이 작을수록 크게 증가한다. 4. 실용적인 규격의 옹벽의 변위는 활동에 의한 것보다 전도에 의한 것이 훨씬 크며 전체 변위의 대부분을 차지한다. 5. 옹벽 상단의 횡적 변위는 옹벽 설계를 결정짓는 중요한 요소가 될 수 있다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.228-232
• /
• 2002

본 연구에서는 다목적 실용위성 2호기에 적용된 금속 구조물 중 알루미늄 샌드위치 패널 구조인 탑재체 플랫폼과 튜브 스트럿(tube strut) 구조에 복합재료 응용기술을 적용하였다. 복합재료 구조로의 대체 설계에서도 관성하중 및 음향진동등과 같은 극심한 발사환경과 더불어 운용하게 될 우주 열환경을 고려하였다. 연구의 목적은 금속소재보다 비강도, 비강성이 우수한 복합재료를 위성 구조물에 사용함으로써 무게를 경량화함에 있다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.29-30
• /
• 2006

나이모닉 일체형으로 사용되고 있는 선박용 2 행정 저속엔진의 배기밸브 스핀들을 고온, 고압, 배기가스 및 반복 충격 하중에 노출된 스핀들의 Head부분은 기존의 나이모닉 소재를 적용, 기존 재질의 우수한 성질을 유지하고 설계적으로 나이모닉 소재의 적용이 불필요한 Stem부는 오스텐나이트 계열의 SNCrW 소재를 사용하여 관성마찰 용접 방식으로 접합하여 제품을 제작하고, 접합부의 미세조직 관찰, 성분분석, 인장, 경도, 피로시험 등의 기계적, 금속적 특성평가를 통해 마찰용접제품에 대한 신뢰성을 확인하고 양산 생산을 위한 기술적 토대를 마련하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.4
• /
• pp.175-184
• /
• 2006

Two methods of the nonlinear static pushover analysis have been presented for the performance-based seismic design and evaluation of MDOF continuous bridges. Guidelines for buildings presented in FEMA-273 applying the Displacement Coefficient Method (DCM) and in ATC applying the Capacity Spectrum Method(CSM) have been modified for MDOF bridges. Two methods are compared with the time- history analysis. The lateral load distribution pattern for seismic loads has been examined in the static pushover analysis. The force-based fiber frame finite element has been implemented in the modeling of reinforced concrete piers.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.113-120
• /
• 2011

Retractable roof system is one of the special feature in stadium or complex structure. And this retractable roof system makes possible to use spacial structure all-weather. This retractable roof system is able to classified into overlapping, parallel movement and folding system. Moving load, impact load, inertial or braking loads, these dynamic loads induced by movements of retractable roof system. So it is necessary to analysis of spacial structures are subjected to these dynamic loads. Dynamic loads that are induced by the retractable roof movements can be applied to moving mass method or moving force method. But, moving force method is appropriate because the retractable roof movements is slow relatively. In this paper, new application method of moving forces induced by the retractable roof movements is proposed. And vibration analysis of spacial structures are executed by using the proposed method. This proposed equivalent moving force can be easily applied to spacial structure that is subjected to dynamic loads induced by movement of the retractable roof system.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.87-98
• /
• 2011

In this study, the magnitude and phase variation of dynamic earth pressure acting on a pile in liquefiable soils were analyzed using a series of 1g shaking table tests. In the case of a pile in dry sand, the value of the dynamic earth pressure was the highest near the surface due to the inertia force of the upper load on the pile and it decreased as the depth of the pile got lower. On the other hand, for a pile in liquefiable sand, the magnitude and shape of the dynamic earth pressure were similar to those of the excess pore pressure and was largely affected by the deformation of soils. Furthermore, the inertia force of the upper load and the dynamic earth pressure acted in opposite directions in cases of dry sand and saturated sand where low excess pore pressure had developed. However, after liquefaction, those force components near surface acted unfavorably in the same direction. Finally, the Westergaard’s solution was modified and proposed as a method to evaluate the magnitude of dynamic earth pressure acting on a pile during liquefaction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.209-215
• /
• 2010

In this study, seismic response analyses of a MW class wind-turbine have been conducted considering applied wind-loads using advanced computational method based on CFD and FEM. Typical lateral and vertical acceleration levels induced by earthquake is also considered herein. Practical numerical method for seismic response analysis of wind-turbine tower models are presented in the time-domain and the effects of wind load and seismic excitation for responses are compared to each other. It is importantly shown that possible earthquake effect during typical operating conditions should be taken into account in the design of huge wind-turbine tower systems because of its enormous inertia characteristics for induced maximum stress level.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.17-23
• /
• 1990

When a thin walled member is subjected to compression in a condition such as collision, the energy is mainly absorbed by axial crumpling. In this case, dynamic crushing strength of the member is increased due to the effects of strain-rate compared with the static strength, even though the inertia effect is neglected. In this paper, the method of predicting the static crushing for tubular members is presented using the kinematic method of plasticity. Since, a predicted crushing load, taking account of the dynamic yield stress, usually overestimates the effects of strain-rate, the average plastic flow stress for the effects of strain-rate is used to obtain the dynamic crushing load for tubular members. The analytical results are compared with the experiments published in references, and a good correlation is observed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.143-150
• /
• 2015

At present, the actual condition is that Korean modular structures are limited to a low rise detached house and military barracks. And there is no standardized structural design method of stacked modular structure. Accordingly, in general, they don't review impact force in the stage of stacking and installing a module, the effect which wind load has on a structure in the stage of lifting, and inertial force occurring in the stage of lifting or transporting a module in the process of constructing a structure. Therefore, this study investigated the construction method of modular system to be studied in stages, and decided on the position to which load was applied and boundary condition in structural analysis at each construction stage. Besides, inertial force according to each speed was calculated in the lifting and wheeled transport of module. And we calculated impact load according to lifting speed in module stacking and installation work and wind load due to instantaneous wind speed in the installation work by lifting. On the basis of the suggested method, in the modular system to be studied, it carried out review of structure by changing determining conditions of load being applied by construction stage, such as in the stage of lifting, in the stage of transport, and in the stage of installation, and drew construction conditions securing stability structurally.