• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.714-719
• /
• 2013

A turboprop aircraft for this study is required to operate at icing condition in order that it performs its given mission. So an air intake system of the turboprop aircraft should be designed and verified not only to provide the maximum possible total pressure at engine inlet at normal flight condition, but also to include an inertial separator which protects Foreign Object Debris (FOD) like ice or snow at icing condition from entering into the engine inlet screen which can cause or lead an catastrophic engine failure like engine flame-out or severe damage. So an air intake assembly incorporating a variable geometry inertial separator has been designed and then CFD/structural analysis for the assembly was performed to see its design results. Then 35% scaled model of the air intake assembly was manufactured and wind tunnel test was done. This paper describes the detailed design results for the aerodynamic design, analysis and wind tunnel testing during the development process of the air intake assembly.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.59-60
• /
• 2000

에어로졸을 분리할 수 있는 장비로는 전기적 이동차 분석기(differential mobility analyzer), 싸이클론(cyclone), 습식 충돌기(impinger), 습식 싸이클론(wet cyclone), 확산 배터리(diffusion battery), 관성 임팩터(inertial impactor), 그리고 가상 임팩터(virtual impactor) 등이 있다. 이중 가상 임팩터는 설계 및 제작이 비교적 간편하고, 입자를 분리 및 농축하는데도 좋은 성능을 나타냄으로 널리 사용되어져 왔다. (중략)

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.470-475
• /
• 2017

Since the intake air of gas turbine engine of marine purpose contains water particles, inertial separator for separating the air and water particles are provided. Saw type and wave type separator are now used to separate inflow water particle from the gas. In this paper, the design parameters of saw type separator are studied by numerical simulations. Using the commercial CFD program, Star-CCM+, Lagrangian-Eulerian method was used to perform the analysis of two phase flow of the mist in the air. This method solves Reynolds-Averaged Navier-Stokes equations in Eulerian framework for the continuous phase, while solves equation of motion for individual particles in Lagrangian framework. Lagrangian multiphase method was applied to monitor the particles of different sizes and shapes and to verify collision between particles by chasing particles. Water particles were injected through injectors located at the inlet of the separator and escape mode was used which assumes that the particles attached on the surface of inertial separator were removed from the simulation, effectively escaping the solution domain. Through the numerical computations with the inlet condition of constant water particle size in the wetness fraction of 85%, efficiency of eliminating the water particle and the pressure drop between the inlet and outlet were examined.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.207-208
• /
• 2003

현재 싸이클론, 임팩터, 원심분리기, 전기적 이동차분석기 등 다양한 기기들이 에어로졸을 샘플링 하거나 입경별로 분리하는데 이용되고 있다. 이러한 다양한 샘플러 중에, 임팩터는 설계 및 제작이 간편하고 입자를 쉽게 분리 및 포집할 수 있어서 입자 분리기술로 May(1945)가 개념을 처음 도입한 이래로 많은 연구가 진행되었고, 현재는 관성 임팩터(inertial impactor)의 단점을 극복한 가상 임팩터(virtual impactor) 및 컵 임팩터(cup impactor) 기술이 널리 적용되고 있다. 컵 임팩터 기술은 PM$_{10}$, PM$_{2.5}$ 등 많은 환경 계측 장비의 도입부에 사용되고 있는 기술이다 (중략)략)

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.583-586
• /
• 2009

우리나라에서의 실내공기 중 미생물에 대한 연구는 사무실, 유치원, 극장, 도서관등 다중이용시설과 병실 내 공간에 존재하는 곰팡이를 비롯한 오염 미생물 수에 대한 조사가 이루어지고 있으나 노인요양시설을 대상으로 한 바이오에어로졸이 포함되어 있는 미생물의 종류에 대한 연구는 아직 미비한 실정이다. 따라서 본 조사에서는 1개 광역도 1개 도농복합도시 지역의 노인요양시설을 대상으로 실내 미생물 오염상태가 건강에 미치는 영향과 적절한 실내 환경유지를 위한 미생물 오염 방지 및 개선방안에 대한 기초자료를 제공하고자 노인요양시설의 실내 미생물의 오염실태를 조사하였다. 2007년 4월 1일부터 5월 31일까지 2개월 동안 1개 광역도 1개 도농복합도시 지역의 노인요양시설 5곳을 대상으로 실내 외의 공기 중 바이오에어로졸 조사하기 위해 관성충돌 채취법을 적용한 미생물 채취기인 air IDEALTM(Biomerieux)를 이용하여 면양혈액한천배지와 Sabouraud Dextrose Ager를 사용하여 채취하여 배양하였다. 배양하여 분리 동정한 결과 다음과 같은 결론을 얻었다. 1. 각 시설별 전체 미생물의 분리는 300 L 실내에서 S 요양원이 263 cfu/m3로 가장 많았고, U 요양원이 123 cfu/m3로 가장 낮은 수가 분리되었다. 진균의 수는 300 L 실내에서 G 요양원이 73 cfu/m3로 가장 많았으며, C 요양원은 40 cfu/m3로 가장 낮은 비율로 분리되었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.148-156
• /
• 2005

The purpose of this paper is to propose an approach to design a robust servo controller based on the mixed $H_2/H_{\infty}$ theory, and confirm its validity by applying to a benchmark problem. First, the existing $H_{\infty}$ servo problem is modified to a structure for the mixed $H_2/H_{\infty}$ control problem by virtue of the internal model principle. By making use of proposed structure, we can divide specifications required in the robust servo system design into $H_2$ and $H_{\infty}$ performance criteria, respectively. It is shown that the proposed design approach is quite effective through an application to a three inertia benchmark problem.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.149-158
• /
• 2006

A review has been made on what kind of method can be applied to predict the dynamic derivatives of the separated PLF(Payload Fairing) halves of a launch vehicle in consideration of technology and budget. An optimal approach is selected considering the geometric characteristics of the PLF halves, the aerodynamic conditions and the required accuracy. The time history of aerodynamic force/moment coefficients are obtained for the forced harmonic motions by solving the unsteady Euler equations derived with respect to the inertial reference frame. and the dynamic derivatives are deduced by integration of the aerodynamic coefficients for one period. In this research, the dynamic derivatives are presented for 0.6$\leq$ M $\leq$2.0, $-180^{\circ}$ $\leq$$\alpha$ $\leq$$180^{\circ}$ and $-90 ^{\circ}$$\leq$$\beta$$\leq$$90 ^{\circ}$.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.28-36
• /
• 2000

This study describes to analyze the characteristics for separation and recovery of both the dried particles and the purified solvent from the waste solvent through the vaporization process by the continuous and instantaneous vacuum drying system. The vacuum drying system for the waste solvents recovery consists of a feeding pump, a double pipe heat exchanger, a vacuum spray chamber, and a condenser. The vacuum drying system heats the waste solvent to the vapor in the double pipe heat exchanger and the expanded vapor is sprayed at the end of the tube. The vaporized solvent in the condenser are recovered. The particles in the waste solvent are separated and dried from the vapor in the vacuum spray chamber. Performance evaluation of the vacuum drying system was conducted using the mixture of the dried pigment particles and benzene or alkylbenzene as test samples. For the mixture of 10 wt% pigment particles an 90% benzene, the recovery efficiency of benzene was 88% with the purity of 99% and the recovery efficiency of dried particles was 94% with the moisture of 1.1 wt%. The size of pigment particles was decreased from $6.5\mu\textrm{m}$ to $5.6\mu\textrm{m}$ in diameter due to high speed spraying and dispersion in the vacuum drying system during drying process. Therefore, the vacuum drying system showed to be an effective method for separating particles and solvent in the waste solvent.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.371-374
• /
• 2012

본 연구는 "사이클론과 관성충돌 및 백필터의 제진원리를 일체화한 고효율 멀티 제진시스템의 최적화 설계를 위한 수치 해석적 연구(I) : 집진기 입구 최적화 설계"에 이은 일련의 연구로서 앞선 연구에서 도출된 사이클론부 하단 벤츄리(Venturi)에서의 강한 하향 기류의 가속에 따른 분진 재비산 가능성에 대한 추가적 검토를 위한 연구이다. 사이클론부를 통과한 기류가 상향 흐름으로 방향을 전환할때 좀 더 가속시켜 빠르게 곡률반경을 형성하여 조대 입자의 분리를 극대화시키기 위한 목적으로 사이클론부 하단을 벤츄리 형상으로 설계하였으나, 유동장 분석 결과 벤츄리를 통과한 처리가스 흐름이 가속되면서 호퍼 하단까지 약 4~5 m/s의 강한 하향 흐름을 형성하고 호퍼 하부의 말단 부근에서 상향 흐름으로 방향 전환을 하고 있는 것으로 예측됨에 따라 설계 의도와는 달리 벤츄리 설치시 호퍼 하단에 포집된 분진의 재비산을 예방하는데는 크게 역할을 하지 못하는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2485-2491
• /
• 2009

Culture was performed by using Sheep Blood Agar Plate (BAP, Asan Pharmaceutical) and Sabouraud Dextrose Ager (SDA, Asan Pharmaceutical) along with air $IDEAL^{TM}$ (Biomerieux), which is a microbe interceptor based on inertial impaction interception, in order to investigate bioaerosol in indoor and outdoor air at five elderly care facilities in a metropolis and an urban-rural consolidated city for two months from April 1 to May 31, 2007. From the culture followed by isolation and identification, the following conclusions were drawn. 1. As for the general isolation of microbes in each facility, care center S had the largest amount of microbes (263 cfu/$m^3$) isolated in a 300L room, followed by care center U having 123 cfu/$m^3$ isolated. 2. As for the number of bacteria isolated from a medium intercepting 300 L indoor, the largest amount of other unidentified or non-pathogenic Gram positive cocci (321 cfu/$m^3$) was isolated and most of the other Gram positive cocci were CNS (Coagulase Negative Staphylococcus). 3. As for the number of fungi isolated from a medium intercepting 300 L in a room, the largest number of Aspergillus spp. (66) was isolated, followed by Mucor spp. (62 cfu/$m^3$), Penicillium spp. (53 cfu/$m^3$), Alternaria spp. (50), and other unidentified or non-pathogenic fungi (42 cfu/$m^3$). 4. As for the rate of indoor and outdoor pollution, the average number of interceptions was all larger indoor than outdoor; the research differentiating the amount of air into 300 L and 500 L demonstrated that the larger amount of air led to more bacteria, making no great variation in the species.