• Title/Summary/Keyword: 관내

Search Result 1,266, Processing Time 0.027 seconds

Quantity of Ice Slurry in Cooled Tube by Continuous Ice Making using Organic Water Solution (유기수용액에 의한 냉각관내 연속제빙시의 제빙량)

  • ;Hidetoshi Miura;Akihiko Horibe;Hideo Inaba
    • Journal of Energy Engineering
    • /
    • v.9 no.3
    • /
    • pp.221-227
    • /
    • 2000
  • 본 논문은 냉각된 원관내에서 유동하는 프로필렌글리콜 수용액의 제빙에 관하여 실험한 것이다. 실험은 수용액의 질량농도, 수용액의 유속, 관벽의 온도, 펌프의 압력 등을 변화시키면서 행하였다. 그 결과 관내에서의 제빙량은 프로필렌글리콜 수용액의 관내유속, 벽면과 냉각도 및 수용액의 농도에 영향을 받고 있었고, 수용액의 질량농도가 낮을수록 또 시험수용액의 유속이 빠를수록 관내에서의 제빙량은 증가하는 경향을 띄었다. 그리고 관내제빙율에 영향을 미치는 인자들의 효과를 검토하여 관내제빙율에 관한 우차원식을 얻었다.

  • PDF

Computation of Plug Capacity for Open -Ended Piles Driven into Sands (모래지반에 타입된 개단말뚝의 관내토지지력 산정)

  • 백규호;이승래
    • Geotechnical Engineering
    • /
    • v.9 no.4
    • /
    • pp.7-16
    • /
    • 1993
  • Calibration chamber tests were conducted on open -ended model piles driven into dried siliceous sands with different soil conditions in order to clarify the effect of soil conditions on plug capacity, The model pile used in the test series was devised so that the bearing capacity of an open -ended pile could be measured out into three components , outside shaft resistance. plug resistance and tip resistance. Under several assumption, the value of earth pressure coefficient in the soil plug is calculated. It is gradually reduced with increase in the longitudinal distance from the pile tip. At the bottom of soil plug, it tends to decrease with increase in the penetration depth and relative density, and to increase with the increase of ambient pressure. In comparison of measured and calculated plug capacities using the one -dimensional analysis, we note that API code and one -dimensional analysis combined with P suggested by Randolph et al. and O'Neill et al. result in great underestimation of the plug capacity. Therefore, based on the test results, an empirical equation was suggested to compute the earth pressured coefficient to be used in the calculation of plug capacity using the one -dimensional analysis. and it produces proper plug capacities for all soil conditions.

  • PDF

A study on the reasonable standard of Max. flow in a pipe for designing the best Pipe network (우수관 설계를 위한 관내 최대유속기준 타당성 검토에 관한 연구)

  • Lee, Jung-Min;Kim, Young-Jin;Park, Jong-Pyo;Hyun, Kyoung-Hak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.1696-1700
    • /
    • 2010
  • 현재 국내에서 적용하고 있는 관내 최대유속기준 3.0m/s의 타당성을 평가하고자 SWMM 모형을 이용하여 최대유속 적용기준에 대한 우수관거 수리분석 연구를 수행하였다. 강우시 모니터링 지점의 우수유입에 따른 관내 실측결과와 검 보정을 통하여 모형을 구축하였으며, 설계빈도(10년 빈도) 홍수 유입시 관내 수리특성을 분석하였다. 관 최적 설계안 수립을 위한 관거 모델링 수행을 통해 관 경사, 조도계수 변화에 따른 관내 최대유속 민감도 분석을 수행하고 최대유속 기준 변화에 따른 최적설계안을 제시하였다. 일반적으로 우수관거 수리계산시 실무에서는 MAKESW 프로그램을 사용하고 있다. 본 연구에서는 MAKESW가 반영하지 못하는 호우시 관거내 유속, 유량변화 시계열을 SWMM 모형을 통하여 우수관거 수리분석을 수행하였다. 실제 사업지구의 경우 MAKESW를 이용하여 설계된 관내 최대유속이 3.0m/s 이하 일지라도 월류, 압력류, 배수영향을 종합적으로 고려하는 SWMM 모형의 수행결과는 일부 관거에서 설계기준 이상의 유속이 발생하는 것으로 나타났다. 설계빈도 홍수량 유입시 관 경사, 조도계수 변화에 따른 관거 내 최대유속 민감도 분석을 수행한 결과, 관 경사가 5‰ 증가할 때 관내 최대유속은 약 4~26% 증가했으며, 관경사가 완만한 경우 관 경사 증가에 따른 최고유속의 증가 민감도는 더 커졌다. 관 조도계수에 따른 최고유속 분석결과 관 조도계수가 0.005 커질 때 최고유속은 약 30% 증가하는 것으로 분석되었다. 현재 국내의 최대 유속기준을 준수하려면 규정보다 훨씬 많은 맨홀 또는 암거의 낙차공을 설치해야 하기 때문에 공사비 증대를 초래할 수 있다. 아직 기본적인 연구단계지만 본 연구결과와 보완연구를 통하여 최적의 관내 최대유속 기준조건을 우수관거 설계계획에 반영한다면 공사비 절감, 공기단축 등의 효과가 있을 것으로 판단된다.

  • PDF

Porewater Pressure Buildup Mode Induced in Near-field of Open-ended Pipe Pile during Earthquake and Sequake (지진과 해진시 개단강관말뚝 주변에 유발된 간극수압의 발생 양상)

  • 최용규
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.2 no.4
    • /
    • pp.23-30
    • /
    • 1998
  • During an earthquake, there are three components of excitation : horizontal excitation of the ground, vertical excitation of the pile due to superstructure feedback produced by vertical excitation of the ground, and the seawater excitation by the vertical ground shaking, that is, "the seaquake." These excitations could have effects on the pore pressure buildup mode induced in the near-field of open-ended pile and the soil plugs in open-ended pipe piles installed at offshore sites. While the ground and pile excitation could be modeled by exciting the soil and pile with simulated motions, seaquake excitation induced by the vertical ground shaking can be modeled by pulsing the water pressure at the seabed. The objectives of this study were to observe buildup trend for the porewater pressures developed in near-field of open-ended pipe pile installed in the calibration chamber during the simulated earthquake and seaquake and, also to confirm the cause for reduction of soil plugging according to pore pressure buildup. During the simulated horizontal seismic motion, there was no upward flow through soil plug because the similar magnitude of excess porewater pressure were occurred at the top and under the toe of soil plug. During the horizontal seismic motion, relatively higher hydraulic gradients caused upward flow in the soil plug and then the degradation of plugging resistance was about 20%. During seaquake, in the case of the open-ended pile installed in a deep sea with more than 220m of water depth, soil plug failed completely because of high upward hydraulic gradients through soil plug.soil plug.

  • PDF

Soil Plugging Behavior of Open -ended Pile for Different Installation Methods (말뚝의 설치 방법에 따른 관내토의 폐색 거동)

  • 최용규
    • Geotechnical Engineering
    • /
    • v.11 no.4
    • /
    • pp.25-36
    • /
    • 1995
  • A specially designed model open -ended pile, which was composed of inner tube and outer tube, wry driven in the pressure chamber by two diffenent intallation methods, that is, impact -driving and vibratory driving, and static compression loading test was done for that pile. Through the measurement of bearing capacities in the separated resisting parts of open -ended pile, bearing mechanism of open-ended pile and soil plugging behaviors for different installation methods were studied. It appears that 20% out of soil plugging force of impact -driven pile was developed during driving, while the rest was developed during static compression loading and t.he magnitude of confining pressure applied to the chamber did not affect soil plugging behavior. Also. it appears that, soil plugging force of vibratory pile was not developed during driving, while it was developed weakly as about 0.5~0.7 times as that of impact pile during static compression loading. and the confining pressure of pressure rhamber had an effect on the soil plugging. In the ultimate loading condition unit soil plugging force did not approach to the failure condition.

  • PDF

HID 램프용 전자식 안정기 회로 및 특성 이해

  • 김기정
    • Electric Engineers Magazine
    • /
    • v.230 no.10
    • /
    • pp.30-33
    • /
    • 2001
  • 음향공명 발생원인 가스가 들어있는 방전관내에 방전전류가 흐르면 전력에너지가 발생하여 열을 발생 시키고 이 열은 방전관내의 압력변화를 가져온다. 이 압력변화는 방전관내의 음향변화와 같다. 주기적인 압력변화가 내벽에 반사되어 정재파가 발생되는 현상이 방정관의 고유진동수이며 이 고유진동수와 전원주파수가 일치될 때 음향공명현상이 일어난다.

  • PDF

The Effect of Ultrasonic Vibration on Heat Transfer Augmentation of Forced Convective Flow in Circular Pipes (초음파 진동이 관내 강제대류 유동의 열전달 증진에 미치는 영향)

  • Jeong Ji Hwan
    • Journal of Energy Engineering
    • /
    • v.13 no.4
    • /
    • pp.275-280
    • /
    • 2004
  • Augmentation of heat transfer by ultrasonic vibration in pipes are investigated. Measurements of convective heat transfer coefficients on circular pipe walls are made with and without ultrasonic vibration applied to water. These data are compared with each other to quantify the effects of ultrasonic vibration on heat transfer enhancement. Numerical analysis has been also performed in order to extend the ranges of examined temperature and flow rate. FLUENT Ver.6.1 is used to simulate velocity and temperature fields and evaluate heat transfer coefficient with and without ultrasonic vibration. The results show that the ultra- sonic vibration enhances the Nusselt number of forced convection flow and the increase rate strongly depends on flow rate.

Effects of particle size and density on solid recycle characteristics of Loop-seal in a Circulating Fluidized Bed (순환유동층내 Loop-seal 에서의 고체재순환에 대한 입자크기 및 밀도의 영향)

  • 김성원;안정렬;김상돈
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1999.11a
    • /
    • pp.31-34
    • /
    • 1999
  • 기-고체간의 접촉효율이 높고, 층 내 전체에 걸쳐서 균일한 기-고의 접촉을 갖는 등 많은 장점이 있어 석탄연소로, 촉매반응기와 같은 여러 기-고 반응기에 적용이 확대되고 있는 순환유동층은 높은 유속에서 조업되므로 상승관내 고체입자들은 즉시 비산하게 된다. 따라서, 원활한 반응에 필요한 상승관내 적절한 고체체류량 유지를 위해 고체입자들 대부분은 싸이클론에서 포집 되어 고체재순환부에 의하여 상승관내로 재주입 된다.(중략)

  • PDF

Studies on Bovine Maturation and Developmental Acquisition after Treatmtent with Different Cryoprotectants 1. Toxic Effects of Propanediols on In Vitro Maturation and Fertilization Bovine Oocytes (소 수정란의 동결처리에 의한 난자성숙과 발육능 획득에 관한 연구 1. 미성숙 소난자의 시험관내 성숙과 수정시 Propanediols의 독성 효과)

  • 석호봉;파스칼멕미오
    • Journal of Embryo Transfer
    • /
    • v.8 no.1
    • /
    • pp.25-30
    • /
    • 1993
  • 소 난자의 시험관내 수정시 이성체인 1, 2 propanediol과 1, 3 propanediol과의 동결보호제의 이용에 대한 독성효과를 조사하였다. 프랑스에 있는 도축장의 난소에서 채취한 미성숙 난자 212개를 시험관내 성숙과 heparin(10$\mu$g/ml)첨가에 의한 수정 및 배양을 실시하였다. 소 난자의 시험관내 성숙과 수정시 propanediol의 독성효과를 시험한 결과 1,3 propanediol은 80%의 정상 난할분할율과 5.7%의 낮은 다핵분할구율을 나타내었다. 이것은 1,2 propanediol의 73.9%, 10.3%와 미처리대조구의 73.9%, 7.7%와 비교되었으나 처리간의 유의성은 없었다. Heparin 처리구는 1,2 propanediol의 첨가 유무에 관계없이 미처리구에 대하여 고도의 유의성 차이가 인정되었다. (P<0.05)

  • PDF

배수관내의 공기압력 변동의 완화방법

  • 유건석;이용화
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.32 no.10
    • /
    • pp.27-30
    • /
    • 2003
  • 배수관내의 공기의 압력변동을 완화시키는 방법의 하나인 통기밸브 등에 대해 소개한다. 배수설비의 목적은 위생기구로부터의 오배수를 건물 밖으로 신속하게 배출함과 동시에 배수관내에 악취성분을 포함하고 있는 오염된 공기가 실내로 침입하여 실내공기가 오염되는 것을 방지하기 위한 역할도 한다. 하수가스의 침입을 방지하기 위해 각종 형상의 배수트랩을 설치하는데, 여러 가지 원인에 의해 트랩내의 봉수는 파괴되기도 한다. 봉수파괴 원인 중에서도 가장 큰 영 향을 미치는 사이 폰 작용에 의한 봉수 파괴는 배수 수직관 및 수평주관내의 공기의 압력변동이 원인(유도사이펀 현상)이 되어 발생하거나 배수자신(자기사이펀 현상)에 의해 발생한다. 배수관내의 압력은 배수부하가 발생한 경우에는 그 배수에 의한 공기의 이동 등에 의해 변동하며, 배수가 없어도 배수관 접속부의 기압변동이나 상승기류에 의해 변동된다.(중략)

  • PDF