• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.223-228
• /
• 2008

The most critical point in the medical use of radiation is to minimize the patient's entrance dose while maintaining the diagnostic function. Low-energy photons (long wave X-ray) among diagnostic X-rays are unnecessary because they are mostly absorbed and contribute the increase of patient's entrance dose. The most effective method to eliminate the low-energy photons is to use the filtering plate. The experiments were performed by observing the image quality. The skin entrance dose was 0.3 mmCu (copper) filter. A total of 80 images were prepared as two sets of 40 cuts. In the first set (of 40 cuts), 20 cuts were prepared for the non-filter set and another 20 cuts for the Cu filter of signal + noise image set. In the second set of 40 cuts, 20 cuts were prepared for the non-filter set and another 20 cuts for the Cu filter of non-signal image (noisy image) with random location of diameter 4 mm and 3 mm thickness of acryl disc for ROC signal at the chest phantom. P(S/s) and P(S/n) were calculated and the ROC curve was described in terms of sensitivity and specificity. Accuracy were evaluated after reading by five radiologists. The number of optically observable lesions was counted through ANSI chest phantom and contrast-detail phantom by recommendation of AAPM when non-filter or Cu filter was used, and the skin entrance dose was also measured for both conditions. As the result of the study, when the Cu filter was applied, favorable outcomes were observed on, the ROC Curve was located on the upper left area, sensitivity, accuracy and the number of CD phantom lesions were reasonable. Furthermore, if skin entrance dose was reduced, the use of additional filtration may be required to be considered in many other cases.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.453-460
• /
• 2009

The purpose of this study was to determine the dose distribution and image quality according to slice thickness and BC(beam collimation) in the gantry aperture. CT scans were performed with a 64-slice MDCT(Brilliance 64, Philips, Cleveland, USA) scanner. To determine the dose distribution according to BC, a ionization chamber was placed at isocenter and 5, 10, 15, 20, 25 and 30 cm positions from the isocenter in the 12, 3, 6 and 9 o'clock directions. The dose distribution for phantom scan was also measured using CT head and body dose phantom with five holes at the center of the phantom and the positions of the 12, 3, 6 and 9 o'clock directions. The image noise measurement for different BCs was performed using an AAPM CT phantom. Water-filled block of the phantom was moved by 5 cm or 10 cm to the 12 o'clock direction, and the image noise was measured at the center of the phantom, and the points of 12, 3, 6 and 9 o'clock direction respectively. Some points were placed beyond the scan field of view (SFOV), so that measurement was not possible at that points. The results are as follows: The CTDIw showed a larger decrease as the source goes farther from the iso-center or the BC became wider. The CTDIw depends on the BC width more than the number of the channel of a detector array. The value of CTDIW decreased with increasing BC, but the value decreased 16.6~31.9% in the head phantom scan in air scan and 51.0~64.5% in the body phantom scan. The value of the noise was 3.9~5.9 in the head and 5.3~7.4 in the body except for BC of $2{\times}0.5\;mm$, regardless of the degree of deviation from the iso-center. When a subject was located within the SFOV, the position did not significantly affect image quality even if the subject was out of the center.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.351-363
• /
• 2020

It is well known that alluvial sediment located in coastal region has been easily affected by geohazard like ground subsidence, marine or meteorological disasters which threaten invaluable lives and properties. The subsidence is a sinking of the ground due to underground material movement that mostly related to soil compaction by water extraction. Thus, continuous monitoring is essential to protect possible damage from the ground subsidence in the coastal region. Radar interferometric application has been widely used to estimate surface displacement from phase information of synthetic aperture radar (SAR). Thanks to advanced SAR technique like the Small BAseline Subset (SBAS), a time-series of surface displacement could be successfully calculated with a large amount of SAR observations (>20). Because the ALOS-2 PALSAR-2 L-band observations maintain higher coherence compared with other shorter wavelength like X- or C-band, it has been regarded as one of the best resources for Earth science. However, the number of ALOS-2 PALSAR-2 observations might be not enough for the SBAS application due to its global monitoring observation scenario. Unfortunately, the number of the ALOS-2 PALSAR-2 Stripmap images in area of our interest, Busan which located in the Southeastern Korea, is only 11 which is insufficient to apply the SBAS time-series analysis. Although it is common that the radar interferometry utilizes multiple SAR images collected from same acquisition mode, it has been reported that the ALOS-2 PALSAR-2 Stripmap-ScanSAR interferometric application could be possible under specific acquisition mode. In case that we can apply the Stripmap-ScanSAR interferometry with the other 18 ScanSAR observations over Busan, an enhanced time-series surface displacement with better temporal resolution could be estimated. In this study, we evaluated feasibility of the ALOS-2 PALSAR-2 Stripmap-ScanSAR interferometric application using Gamma software considering differences of chirp bandwidth and pulse repetition frequency (PRF) between two acquisition modes. In addition, we analyzed the interferograms with respect to spectral shift of radar carrier frequency and common band filtering. Even though it shows similar level of coherence regardless of spectral shift in the radar carrier frequency, we found periodic spectral noises in azimuth direction and significant degradation of coherence in azimuth direction after common band filtering. Therefore, the characteristics of spectral bandwidth in the range and azimuth direction should be considered cautiously for the ALOS-2 PALSAR-2 Stripmap-ScanSAR interferometry.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1435-1442
• /
• 2008

The purpose of this study was to identify the influence of consumption value on healthy functional food choice. Also, this study explored the role of health motivation, health concern, and food involvement as a moderating variable in the relationship between consumption value and healthy functional food choice. A total of 281 responses were collected using on-site survey (response rate 96.0%) from college students in Daegu, Gyeoungbuk Province. The questionnaire contained questions on consumption value, health motivation, health concern, food involvement, and purchasing intention of healthy functional food. The respondents rated the items using a 5-point scale from 1 (strongly disagree) to 5 (strongly agree). According to the confirmatory factor analysis, item evaluating using factor loading resulted in the retention of 25 consumption value items loading on seven factors, four health motivation items loading one factor, six health concern items loading on one factor, and four food involvement items loading on one factor with an internal consistency. Results of stepwise regression found that social value-I, emotional, functional, epistemic, and conditional values among consumption value determined the purchasing intention of healthy functional food. Results of hierarchical regression showed that health concern had a positive effect on the relationship between social value-I and purchasing intention of healthy functional food.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.17-37
• /
• 1998

중소기업간 협력 활동은 사업의 전체 혹은 일정 부분에 대하여 분업이나 협업의 관계를 맺는 공동사업의 형태로 나타난다. 기업간 연결의 강도에 따라 기업들간에 형성되는 분업과 협업의 관계를 시장형, 중간조직형, 위계조직형으로 구분할 때, 중소기업간 공동사업은 중간조직형에 속하는 일종의 기업간 네트워크라고 볼 수 있다. 물론 네트워크형의 협력관계를 추진하는 방식도 업무제휴, 지분제휴, 합작투자, 컨소시엄 등으로 다양하다. 그러나 완전한 자본적 통합에 따른 위계적 조직과는 달리 참여기업들이 독립성을 유지하면서, 네트워크 밖의 기업에 대해 경쟁우위를 확보하기 위해 형성한다는 공통점을 가지고 있다. 기업간 협력관계를 통해 참여 기업들이 얻을 수 있는 혜택에 관한 기존연구들은 크게 두 가지로 나누어 볼 수 있다. 하나는 기업의 생산함수를 중심으로 그 이점을 파악하는 것이고 다른 하나는 관계의 종류에 따라 기업간 거래관계를 관리하는 소위 거래비용의 효율성을 중심으로 혜택을 파악하는 접근방법이다. 전자의 접근방법을 따를 때, 기업간 협력의 근본 유인은 규모의 경제(혹은 비경제), 범위의 경제, 집적의 경제, 구도의 경제 등이 협력관계에서 발생하는 혜택의 근본 원천이다. 기술과 제도의 발전, 시장과 경쟁환경의 변화에 따른 기업간 협력의 필요성은 갈수록 증대되고 있다. 소비자들의 요구는 매우 개성화 다양화되고 종합화되는 추세이다. 더불어 기술개발의 비용이 큰 폭으로 증가하고 있으며, 경쟁의 격화로 기술 및 제품의 진부화도 급속도로 이루어지고 있다. 세계화 상품고도화 서비스산업화 정보화 등으로 특징지워지는 새로운 경쟁환경 아래에서 장기적으로 기업의 경쟁력을 향상시키기 위해서는 시장중심적인 관점에서 형성된 기업간 전략적 연계를 바탕으로, 정보의 집적을 통해 다양한 생산성 향상 혹은 관계효율성 향상의 경제를 추구하는 것이 필연적 전제 조건이 되었다. 기업간 경쟁보다는 최종제품의 생산과 판매를 위해 형성된 기업네트워크간의 경쟁이 중시되는 시대인 것이다. 동서간(東西間) 중소기업(中小企業)의 협력(協力)을 새삼스럽게 논의하는 것은 다분히 정치적이라는 느낌을 준다. 경제적인 관점에서 실익이 있음에도 불구하고 동서간 중소기업의 협력이 이루어지지 못하고 있다면, 그 이유는 기업정보의 수집과 유통상의 문제이거나 문화나 기업관행에 대한 잘못된 선입관에서 비롯된 관계 관리비용 계산상의 문제일 것이다. 현실적으로 이 가능성은 매우 낮다. 산업의 발전 정도나 연관성에 있어서 동서축보다는 남북축을 따라 기업간 협력이 이루어질 수 밖에 없는 우리나라의 현재 상황이 동서간보다는 남북간 경제교류를 유도하고 있는 것이다. 동서간 중서기업 협력체제의 구축에 대한 논의가 본질적으로 정치적 관심에서 비롯되었다는 전제 하에, 구축의 방안을 논의하고자 한다. 경제적으로도 타당하면서 정치적으로 관심을 유발할 수 있는 협력체제 구축방안으로, 기업간 네트워크의 조직 주체로서 최근에 논의되고 있는 새로운 형태의 마케팅회사를 동서간에 공동으로 설립할 것을 제안한다. 영구 지속적 공동사업관계보다는 프로젝트별 공동사업을 전제로 기업들 사이의 효과적인 네트워크를 형성함으로써 일종의 가상적 기업을 결성할 필요가 있다. 이러한 기업간 네트워크 형성의 실행주체가 될 수 있는 새로운 마케팅 전문기업의 형태로는 공동회사(空洞會社)(hollow company), 종합상사(綜合商社)(General Trading Company), 거래형 마케팅회사(Marketing Exchange Company), 변환형 마케팅회사(Marketing Coalition Company) 등을 들 수 있다. 양 지역에서는 소비자환경과 기술환경의 특성 및 양 지역의 경제에 대한 파급효과를 고려하여 가장 적합한 마케팅회사의 유형은 선택하여 육성하고, 이를 중심으로 강력한 양 지역 및 다른 지역에 입지한 기업간의 네트워크를 구축하여야 한다. 마케팅회사를 설립하고 완전한 마케팅 서비스를 제공할 수 있도록 육성하기 위해서는 많은 투자가 필요하다. 마케팅회사의 핵심기능 분야인 금융부문, 정보부문, 영업조직 등은 모두 막대한 투자를 필요로하는 기능영역이다. 정보부문은 기술의 발전과 범세계적인 정보관련기관과의 제휴를 통해 독자적인 구축이 어느 정도 가능하나, 영업조직의 구축을 위해서는 기존업체와의 연대가 필수적인 것으로 판단된다. 지속적으로 효과적인 기업간 네트워크를 형성하고 유지하기 위해서는 또한 기업간 관계를 관리하는 방식과 제도 및 수단에 대한 연구가 필요하다. 양 지역 산 학 관의 공동노력을 통해서 새로운 경제 환경에 가장 적합한 기업 형태로 제시된 바 있는 마케팅 전문회사 중심의 기업간 네트워크를 성공적으로 구축한다면, 양 지역 및 국가 경제의 지속적인 동력원이 될 수 있을 것이다

• Korean Journal of Cognitive Science
• /
• v.15 no.4
• /
• pp.1-14
• /
• 2004

When two objects are tying in the same visual direction there occurs abrupt depth change between two objects, which is against the assumption of the computational model for stereopsis on the surfaces in a natural scene. For this reason, this stimulus configuration is popularly used in the studies for the effectiveness of the constraints employed in the computational model. Contrary to the results from two nails (or objects) tying in the same visual direction, the two different surfaces from random-dot stereogram (RDS) in the same situation can be seen simultaneously in the different depth. The seemingly contradictory results between two situations my reflect the different strategies imposed by binocular mechanism for each situation during binocular matching process. Otherwise, the surfaces tying in the same visual direction is not equivalent situation to two objects tying in the same visual direction with regards to matching process. In order to examine above possibilities, the stereoscopic depth of the surface was measured after manipulating the visual direction of the surface elements. The visual direction of each dot pair from different surfaces in RDS (in Experiment 1) or the visual direction of line (hawing rectangle with regard to that of the vertical line (in Experiment 2) was manipulated. The stereoscopic depth of the surface was found to be varied depending on visual direction of the surface elements in both RDS and line hawing stimulus. Similar to the results from two nails situation depth of the surface was greatly reduced when each surface element was tying in the same visual direction as that of the other surface element or the other object. These results suggest that binocular mechanism imposes no different strategy in resolving correspondence problem in both two objects and two surfaces situation. And the results were discussed in the context of usefulness of the constraints employed in the computational model for stereopsis.

• Korean Journal of Cognitive Science
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2002

This study was performed to analyze the physical attributes of the faces and affective words on the fares. For analyzing physical attributes inside of a face, 36 facial features were selected and almost of them were the lengths or distance values. For analyzing facial contour 14 points were selected and the lengths from nose-end to them were measured. The values of these features except ratio values normalized by facial vortical length or facial horizontal length because the face size of each person is different. The principal component analysis (PCA) was performed and four major factors were extracted: 'facial contour' component, 'vortical length of eye' component, 'facial width' component, 'eyebrow region' component. We supposed the five-dimensional imaginary space of faces using factor scores of PCA, and selected representative faces evenly in this space. On the other hand, the affective words on faces were collected from magazines and through surveys. The factor analysis and multidimensional scaling method were performed and two orthogonal dimensions for the affections on faces were suggested: babyish-mature and sharp-soft.

• Korean Journal of Cognitive Science
• /
• v.28 no.1
• /
• pp.1-26
• /
• 2017

This study investigated the cortical generators of P300 in college students with schizotypal traits by using an auditory oddball paradigm, event-related potentials (ERPs) and standardized low resolution brain electromagnetic tomography (sLORETA) model. We also investigated the relationship between the current density of P300 and the clinical symptoms of schizophrenia. Based on the scores of Schizotypal Personality Questionnaire(SPQ), schizotypal trait (n=37) and control (n=42) groups were selected. For the measurement of P300, an auditory oddball paradigm, in which frequent standard tones (1000Hz) and rare target tones (1500Hz) were presented randomly, was used. Participants were required to count the number of the target tones during the task and report this at the end of the experiment. The two groups did not differ significantly in the accuracy of the oddball task. The schizotypal trait group showed significantly smaller P300 amplitudes than control group. In terms of source localization, both groups showed the P300 current density over bilateral frontal, parietal, temporal and occipital lobes. However, the schizotypal trait group showed significantly reduced activations in the left superior temporal gyrus and the right middle temporal gyrus, but increased activations in both left inferior frontal gyrus and right superior frontal gyrus compared to the control group. Furthermore, a negative correlation between the current density of the right superior frontal gyrus and SPQ disorganization score was found in the schizotypal trait group. These findings indicate that the individuals with schizotypal traits have dysfunctions of frontal and temporal areas, which are known to be the source of P300, as observed in patients with schizophrenia. In addition, the present results indicate that the disorganization score, rather than total score, of the SPQ is useful in predicting the risk of future schizophrenia.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.859-867
• /
• 1997

In order to utilize the processing wastes of squid, chitosans were manufactured from the pens of domestic squid, Todarbdes pacificus and foreign squid, Ommastrephes bartrami and then, its rheological properties were studied. The amounts of nitrogen and minerals of the domestic squid pens were $11.4\%\;and\;0.1\%$ respectively, whereas those of its chitosan were $7.5\%\;and\;0.2\%$. In case of foreign squid pen and chitosan, the amounts of nitrogen and minerals were $12.1\%,\;0.8\%\;and\;7.8\%,\;0.2\%$ respectively. Intrinsic viscosity $([\eta]) $ of domestic and foreign squid pen chitosans were decreased with increasing pH from 3.4 to 5.4 which might be due to the reduced repulsion in inter- of intra- chitosan molecules. Intrinsic viscosity of the domestic and foreign squid pen chitosans were decreased with increasing NaCl concentration thus indicated that the domestic and foreign squid pen chitosans were polyelectrolyte molecules and stiffness of squid pen thitosans were 0.11 similar to that of k-carrageenan. Flow type of squid pen chitosan solutions were pseudoplastic fluids without yield stress by the viscosity measurement. But the squid pen chitosan solutions showed newtonian fluid up to $0.15\~0.24\%$ concentration for domestic and $0.21\~0.24\%$ concentration for foreign at $10\~50\%$. Concentration dependence of consistency index in infinitive dilute domain (Kc) were higher in the dilute domain than entangled domain. Activation energies (Ea) of the squid pen chitosans were 3.7, 6.3, 3.6, 4.0 and 4.1 Kcal/g moi for domestic and 3.2, 3.1, 3.4, 3.8 and 3.6 Kcal/g mol for foreign at 0.1, 0.15, 0.25, 0.35 and $0.5\%$, respectively.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.85-116
• /
• 2017

The purpose of this study is to analyze conditions that robots depicted in cinematographic works like animations or movies sympathize with and form an attachment with the nuclear person and organize characterizing strategies for emotional sympathetic robots. Along with the development of technology, the areas of artificial intelligence and robots are no longer considered to belong to science fiction but as realistic issues. Therefore, this author assumes that the expressive characteristics of emotional sympathetic robots created by cinematographic works should be used as meaningful factors in expressively embodying human-friendly service robots to be distributed widely afterwards, that is, in establishing the features of characters. To lay the grounds for it, this research has begun. As the subjects of analysis, this researcher has chosen robot characters whose emotional intimacy with the main person is clearly observed among those found in movies and animations produced after the 1920 when robot's contemporary concept was declared. Also, to understand robots' appearance and behavioral tendency, this study (1) has classified robots' external impressions into five types (human-like, cartoon, tool-like, artificial bring, pet or creature) and (2) has classified behavioral tendencies considered to be the outer embodiment of personality by using DiSC, the tool to diagnose behavioral patterns. Meanwhile, it has been observed that robots equipped with high emotional intimacy are all strongly independent about their duties and indicate great emotional acceptance. Therefore, 'influence' and 'Steadiness' types show great emotional acceptance, the influencing type tends to be highly independent, and the 'Conscientiousness' type tends to indicate less emotional acceptance and independency in general. Yet, according to the analysis on external impressions, appearance factors hardly have any significant relationship with emotional sympathy. It implies that regarding the conditions of robots equipped with great emotional sympathy, emotional sympathy grounded on communication exerts more crucial effects than first impression similarly to the process of forming interpersonal relationship in reality. Lastly, to study the characters of robots, it is absolutely needed to have consilient competence embracing different areas widely. This author also has felt that only with design factors or personality factors, it is hard to estimate robot characters and also analyze a vast amount of information demanded in sympathy with humans entirely. However, this researcher will end this thesis as the foundation for it expecting that the general artistic value of animations can be used preciously afterwards in developing robots that have to be studied interdisciplinarily.