• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.579-598
• /
• 2019

We investigated geochemical contaminants and Fe, Al behavior in precipitates of acid mine drainage (AMD) from the Donghae abandoned coal mine, Taebaek, Gangwon Province using aqueous chemical analyses, XRD, IR, and ²⁷Al NMR, Our results showed that water chemistry changed with pH and Eh, and saturation indices of chemical species in the AMD. According to saturation calculated by visual MINTEQ, the AMD was saturated with various Fe-, Al-oxyhydroxide minerals. Reddish brown precipitates are composed of schwertmannite, ferrihydrite, and goethite, whereas whitish precipitates are composed mostly of alumimous minerals such as poorly crystallized basaluminite with trace Al₁₃-Tridecamer. It is important to apply active treatment methods rather than simple storage pond and to control the precipitation and solubility of iron species and aluminous species for ensuring remediation and control for the AMD discharged from the Donghae abandoned coal mine.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.249-254
• /
• 2000

We investigated the microstructure, electrical property, and magnetic property of Co/Al multilayer after annealing treatment. CoAl was formed during depositing Co/Al multilayer due to the interfacial reaction. After annealing treatment, $Co_2Si$ was formed at the Co/Si interface. The sheet resistance of Co 2 nm/Al 2 nm multilayer have the lowest value and the Rs of multilayer decreased with the increase of annealing temperature due to the formation of $Co_2Si$ phase. The Ms of 2 nm Co/2 nm Al multilayer have the lowest value and the Ms of multilayer increased with the increase of film thickness.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.327-332
• /
• 1996

In this study, the effects of $WSi_x$, thickness and fluorine concentration in tungsten polycide gate structure on gate oxide were investigated. As $WSi_x$, thickness increases, gate oxide thickness increases with fluorine incorporation in gate oxide, and time-to-breakdown($T_{BD,50%}$) of oxide decreases. The stress change with $WSi_x$ thickness was also examined. But it is understood that the dominant factor to degrade gate oxide properties is not the stress but the fluorine, incorporated during $WSi_x$ deposition, diffused into $WSiO_2$ after heat treatment. In order to understand the effect of fluorine diffusion into oxidem fluorine ion implanted gates were compared. The thickness variation and $T_{BD,50%}$ of gate oxide is saturated over 600 $\AA$ thickness of $WSi_x$. The TEM and SIMS studies show the microstructure less than 600 $\AA$ thickness is dense and flat in surface. However, over 600$\AA$, the microstructure of $WSi_x$ is divided into two parts: upper porous phase with rugged surface and lower dense phase with smmoth interface. And this upper phase is transformed into oxygen rich crystalline phase after annealing, and the fluorine is captured in this layer. Therefore, the fluorine diffusion into the gate oxide is saturated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.4
• /
• pp.489-493
• /
• 1993

The major objective of this study carried out was to compare the binding of Kintoki bean lectin (KBL) and Taro tuber lectin (TTL) to the mouse intestinal segments using $^3$H-labeled lectins and to assess the effect of such binding on the ability of the small intestine. Binding of $^3$H-KBL or $^3$H-TTL was studied under various conditions of time course, temperature, concentration, pH and additives of sugars, EDTA or unlabeled native lectin. The interaction of the lectins to intestinal tissue was stronger in KBL than in TTL, which was supposed to be the major reason for the stronger antinuritional enen of KBL. The optimal binding conditions were at 37$^{\circ}C$ for 60mins and at pH 7. The binding of both lectins were inhibited by fetuin and EDTA.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.847-858
• /
• 2014

Until now, a lot of image quality assessment techniques or tools for optimal human visual system(HVS)-awareness have been researched and SSIM(Structural SIMilarity) and its improved techniques are representative examples. However, they often cannot cope with various images and different distortion types robustly, and thus this can cause a large gap between their index values and HVS-awareness. In this paper, we conduct image quality assessment on SSIM and its variants intensively and analyze the causes of each component function's observed anomalies. Then, we propose a novel image quality assessment technique to compensate and improve such anomalies. Additionally, through extensive image assessment simulations, we show that the proposed technique can indicate HVS-awareness more robustly and consistently than SSIM and its variants for various images and different distortion types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.626-626
• /
• 2013

P-N 접합에 의해 절연된 게이트를 통해 전류 통로를 제어하는 접합형 전계효과 트랜지스터(Junction Field Effect Transistors; JFETs)는, 입력 임피던스가 크고, 온도에 덜 민감하며, 제조가 간편하여 집적회로(IC) 제조가 용이하고, 동작의 해석이 단순하다는 장점을 가지고 있다. 특히 JFET는 선형적인 전류의 증폭 특성을 가지고 있으며, 잡음이작기 때문에, 감도가 우수한 음향 센서의 증폭회로, 선형성이 우수한 증폭회로, 입력 계측 증폭 회로 등에 주로 사용되고 있다. 기존에 사용되는 JFET 소자는 구조와 제조 공정에 따라서, 컷 오프 전압($V_{cut-off}$)과 드레인-소스 포화 전류($I_{DSS}$)의 변화가 심하게 발생하여, 소자의 전기적 특성 제어가 어렵고, 소자의 수율이 낮다는 문제점이 있다. 본 연구에서는 TCAD 시뮬레이션을 통해 게이트 전압에 의해 채널이 형성되는 채널 층의 상하부에 각각 $Si_xGe_{1-x}$로 이루어진 상부 및 하부 확산 저지층을 삽입한 JFET 소자 형성하여, 게이트 접합부의 접합 영역 확산을 저지하고, 상기 게이트 접합부가 계면에서 날카로운 농도 구배를 갖도록 함으로써, 공정 변화에 따른 전기적 특성의 편차가 작아지는 JFET 소자 구조를 만들어 전기적 특성을 개선하였다. JFET은 채널층에 삽입된 $Si_xGe_{1-x}$ 층의 두께, Ge 함유량 및 n채널층의 두께를 변화하였을 때, off 상태의 게이트-소스 전압이 감소한 반면에 드레인-소스 포화 전류($I_{DSS}$)와 컨덕턴스(gm) 값이 증가하였다. 삽입된 $Si_xGe_{1-x}$층이 Boron이 밖으로 확산되는 현상이 감소하여 채널이 좁아지는 현상을 막아 소자의 전기적 특성을 개선함으로써 제조공정의 변화에 관계없이 컷오프 전압을 정확하고 안정되게 제어할 수 있고 이를 통해 소자의 수율을 높일 수 있을 것으로 기대된다.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1223-1232
• /
• 2016

A virtual network technology can provide a network reflecting the requirements of various services. The virtual network can distribute resources of the physical network to each virtual slice. An efficient resource distribution technique is needed to reflect the requirements of various services. Existing bandwidth distribution techniques can only control downlink traffic without taking traffic conditions on the network into account. Downlink and uplink share the same resources in a wireless network. The existing bandwidth distribution techniques assumed that all stations generate saturated traffic. Therefore, the existing bandwidth distribution technique cannot make traffic isolation in a virtual wireless network. In this paper, we proposed a traffic-based bandwidth control techniques to solve these problems. We applied Software-Defined Networking(SDN) to the virtual wireless network, monitored the traffic at each station, and searched for stations that generated unsaturated traffic. We also controlled both uplink and downlink traffics dynamically based on monitoring information. Our system can be implemented with legasy 802.11 clients and SDN-enabled APs. After the actual test bed configuration, it was compared to existing techniques. As a result, the distribution performance of the proposed technique was improved by 14% in maximum.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.6
• /
• pp.547-557
• /
• 2013

The mode II fracture toughness and strength due to shear stress are important parameters in the stability of caprock and injection zone with application to geological sequestration of carbon dioxide. In this research, a short beam compression test has been used to determine the shear strength and the mode II fracture toughness for Coconino sandstone. The average value of the shear strength and mode II fracture toughness are estimated to be 23.53 MPa and 1.58 MPa${\surd}$m respectively. The stress intensity factor is suggested by finite element analysis using the displacement extrapolation method. The effect of biaxial stress and water saturation on the fracture toughness has also been investigated. The fracture toughness increases with confining stresses, but decreases by 11.4% in fully saturated condition.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.93-97
• /
• 1988

The physico-chemical properties of clay minerals(Kaolinite, Montmorillonite) and the competitive adsorption of various cations in them were investigated as a basic research for the development of clean and hygienic water from hard and contaminated water. The cation adsorption forces of various cations in two clay minerals were high in the order of $Ca^{{+}{+}}$ > $Mg^{{+}{+}}$ > $K^+$ > $Na^+$, and the orders of cation selectivity coefficients(K) in Montmorillonite, calculated by Kerr's equation, were $^KCa^{{+}{+}}/K$ > $^KMg^{{+}{+}}/K$, $^KCa^{{+}{+}}/Mg$ > $^KK^+/Mg$. The amount of adsorbed cations was most high in Na-saturated Montmorillonite among several samples. So, in order to more effectively remove various divalent cations in hard and contaminated water, Na-saturated Montmorillonite is most desirable.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.467-480
• /
• 2014

This study was focused on measurement methods for stone cultural heritages by analyzing Ultrasonic (P-wave) velocity variations according to the water content and anisotropy of rocks. As a result of analyzing of rock properties, the water content and saturation degree were rapidly changed at the beginning of drying and then showed exponential curve which their rates of change gradually decreased. However, P-wave velocity and its rate of change maintained constant values after natural drying of 10 hours. Therefore, the ultrasonic measurement for stone cultural heritages should be performed after natural drying of 10 hours considering the weather and moisture conditions. In addition, the highest values of anisotropy coefficient exhibited in granite and limestone, and indirect method was insensitive to anisotropy compared to direct method. However, all rocks remained anisotropy by indirect method. Accordingly, ultrasonic measurement considering various directions is required. The research results will contribute to customized non-destructive testing and precise diagnosis for lithological characteristics of stone cultural heritage.