• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.30-38
• /
• 1991

자동차의 제동장치, 조향장치, 자동 변속장치 등에 요구되는 큰 힘을 얻기 위하여 유압식 구동장치가 중량당 출력비가 높고 응답특성이 좋으며 과부하에 대한 방지기능이 간단하게 이루어 진다는 장점이 있기 때문이다. 본 고에서는 우리나라에서도 전자제어식 제동장치, 조향장치, 자동변속장치, 현가장치 등의 개발을 시도하고 있는 현 시점에서 기술축적이 가장 취약한 분야라고 볼 수 있는 자동차용 전기유압밸브의 기본적인 메카니즘에 대하여 종합적으로 소개하고자 한다.

• 전기의세계
• /
• v.22 no.5
• /
• pp.33-38
• /
• 1973

3상 농형 유도전동기는 가장 경제적이고 편리한 동력원이다. 본 고에서는 유도전동기용 기동기에 대하여 여러가지 설계양식의 타당성과 장래의 개발가능성을 고찰한다. 기동기는 전동기를 기동시킬뿐만 아니라 정상상태하에서 정지시키는 장치이다. 또 기동기는 과부하에 의한 손상으로부터 전동기를 보호하고, 정전시의 우발적인 재기동을 방지한다. 기동기의 보호기능이 전기적으로는 중요하지만 이문제는 성가신 기동책무만큼 빈번히 발생하지는 않는다. 전동기용 기동기의 또하나의 기능은 회전방향의 전환 및 속도조정이다.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2010

Manure compost is a main product from animal wastes in Korea. Solid manure is usually treated by aerobic composting at manure composting facilities for land reinforcement. Agricultural use of manure compost as organic fertilizer resources, mainly manure compost, is now recommended in Korea. This study investigated the evaluation of durability about the manure composting machinery and structures which was controlled by aeration and periodic agitating. The questionnaire addressed three main topics as follows: operating practices, machinery and maintenance of the manure composting facilities are being operated. A total of the 22 manure composting facilities in an agricultural cooperative were surveyed. The results obtained in this survey were summarized as follow: The major causes of manure composting apparatus trouble were corrosion and wear, overloading and foreign matter etc. The highly trouble frequency of the agitator, packer and conveyor were chain, agitating blade and shaft, motor and screw vane, respectively. These analytical results can be used as basic information to establish the maintenance control methods and durability standard of manure composting facility.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.423-430
• /
• 2009

Recently as the inactive response characteristics of the existing RCD used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper confirms the unreliability of the existing RCD by electrical fault simulator and proposes a EFDPD by using semiconductor switching devices and a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the self circuit breaker in EFDPD rapidly cuts off the system. The proposed EFDPD confirms the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disasters, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1123-1125
• /
• 2001

최근 스위칭 전원장치를 사용하는 PC, UPS, 정류기 및 조명기기등 비선형부하의 증가에 따라 3상 4선식 배전계통에서 평형부하인 경우에도 중성선에 큰 고조파전류가 흘러 계통내 많은 문제를 야기하고 있다. 본 논문에서는 단상인버터에 의한 중성선전류 제어 기술 (6)로서 불평형하에서 기본파의 영상전류에 의해 필터장치에 과부하가 걸리는 것을 방지하기위한 새로운 제어기법을 제안하고 이론에 의한 분석과 모의실험 및 실험에 의하여 타당성을 입증한다.

• 전기의세계
• /
• v.43 no.4
• /
• pp.20-26
• /
• 1994

전력계통은, 발전기, 변압기, 모선, 선로등을 주요소로 한 많은 설비요소로 구성되며, 이들이 일체로 되어 하나의 안정상태를 유지하면서 운용되고 있다. 전력계통 구성요소중, 특히 가공선로는 지역적으로 널리 분포되어 있으므로, 뢰, 풍우, 염분 등 자연 현상의 영향을 받아 단락, 지락등 계통사고 발생이 불가피하며, 또 다른 구성요소들도 각각 고유한 사고형태와 사고빈도를 가지고 있다. 보호방식은 이들 각종 설비에 사고가 발생하였을 때에, 신속히 사고설비를 계통에서 제거하여, 사고 전류의 계속으로 인한 설비손상을 방지하는 것을 그 기본목표의 하나로 하고 잇다. 그러나 사고발생은 단지 설비의 손상을 가져올 뿐만 아니라, 하나의 안정상태를 유지하고 운용되고 있는 전력계통 전체에 대해서, 이 안정을 무너뜨리는 방아쇠로 작용하며, 사고의 계속, 또는 사고제거에 따른 계통구성의 급변등은 주파수의 저하, 계통탈조, 설비과부하등으로 파급되어 전계통 붕괴로 확대될 가능성을 가지고 있다. 이러한 경향은 전원의 원격화와 집중대용량화, 선로조류의 증가등으로, 계통이 복잡화함에 따라 더 증대하고 있다. 이러한 배경을 바탕으로 하여 보호방식의 책무는, 종전의 설비보호 위주에서 사고파급방지에 의한 계통보호(protection for power system disturbance)로 그 중점목적이 옮겨가고 있으며, 이 사고 파급방지보호장치를 계통안정화장치라고도 한다.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.40-47
• /
• 2009

Nowadays the diversity and large-capacity of electric appliances are strong effect on electrical fires augment in an alarming way. But, as the inactive response characteristics of the existing RCD (Residual Current protective Device) used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper is confirmed the unreliability of the existing RCD by electrical fault simulator and is proposed a Electrical Fire Disaster Prevention Device (EFDPD) by using a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the EFDPD has double protection function which operates self circuit breaker or rapidly cuts off the existing RCD. The proposed EFDPD is confirmed the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disaster, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.877-882
• /
• 2014

The reduction of CO2 emission has been discussed in the Marine Environment Protection committee in the International Maritime Organization as the biggest causes of GHG for the purpose of indexing CO2 amounts released into the atmosphere from ships. Accordingly, various methods including the change in the hull design to improve energy efficiency, the coating development to reduce friction resistances, the additives development for improving thermal efficiency in an engine, the low-speed operation to reduce fuel consumptions, and etc. have been applied. The main engine of a ship is an electronic engine for improving the efficiency of the whole load area. However, marine generator engines still use mechanical drive engines in intake, exhaust, and fuel injection valve drive cams. In addition, most of marine generator engines in ships apply a part-load operation of less then 80% due to an overload protection system. Therefore, marine auxiliary diesel engine set at 100% load is necessary to readjust in order to efficient operation because of part-load operation. The objective of this study is to report the results of the part-load fuel consumption improvement by injection timing readjust to identifying the operational characteristics of a marine generator engine currently operated in a ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.357-362
• /
• 2006

The wedge type rail clamp compresses with small clamping force at first, and with large clamping force when the wind speed increases because of the wedge working. At this time in order to display the wedge working, the rail clamp slips along a rail. If the supporter is not installed in the rail clamp when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. So the supporter has to be installed in the rail clamp. The proper position of this supporter is determined by the initial clamping force and the wege angle. Therefore in this study we adopted 5-kinds of wedge angle as the design parameters, and carried out the finite element analysis, in order to analyze the relationship between the initial clamping force and the proper position of supporter in the wedge type rail clamp.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.65-70
• /
• 2007

The wedge type rail clamp compresses with small clamping force at first, and with large clamping force when the wind speed increases bemuse of the wedge working. At this time in order to display the wedge working, the rail clamp slips along a rail. If the supporter is not installed in the rail clamp when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. So the supporter has to be installed in the rail clamp. The proper position of this supporter is determined by the initial clamping force and the wege angle. Therefore in this study we adopted 5-kinds of wedge angle as the design parameters, and carried out the finite element analysis, in order to analyze the relationship between the initial clamping force and the position of supporter in the wedge type rail clamp.