• Journal of Plant Biology
• /
• v.26 no.1
• /
• pp.33-39
• /
• 1983

Twigs bearing floral buds of Rhododendron yedoense var. poukhanense(Ryp) and R. sinmsii(Rs), hardy species in Korea, were used to investigate the cold hardiness in relation to the developmental and anatomical characteristics, and the changes of water content. In floral buds of both species, the reproductive organs, pistils and stamens, matured within the bud scales in early ctober to prepare for a cold acclimation. The ray parenchymatous areas occupied in xylem were 41% in Ryp and 38% Rs. As the storage temperature is raised from 2 to 17$^{\circ}C$, water content increased more highly in Rs than in Ryp. Exotherm temperature of floral bud in Ryp was generally lower than that in Rs. The result supports that the higher cold-hardiness is achieved owing to the earlier maturation of floral buds, to the larger area of ray parenchyma in xylem, and to the lesser increase of water content as the storage temperature is raised.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.499-505
• /
• 2004

The objective of this study is to investigate the effect of supercooling repression on the TMA clathrate by adding ethylene glycol. For this purpose, phase change temperature, supercooling, specific heat, latent heat and rate of volume change were measured and evaluated experimentally for heat source temperatures of -6$^{\circ}C$, -7$^{\circ}C$, -8$^{\circ}C$. The results show that supercooling was decreased. Thus the experimental results are expected to be used for the increase of coefficient of performance of low temperature thermal storage system in the building.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.337-341
• /
• 2004

Bulk metallic glasses(BMG) with good mechanical properties have problems that engineering application fields have been limited because of limitation of the alloy size. In order to solving this problem, the friction welding of BMG has been tried using the superplastic-like deformation behavior under the supercooled liquid region. The apparatus for friction welding test was designed and constructed using pneumatic cylinder and gripper based on a conventional lathe. Friction welding have been tried to combination of same BMG alloy and crystalline alloys. The results of welding test were evaluated by X-ray diffraction, measurement of hardness and mechanical properties test. In order to obtain the optimized welding test conditions the temperature of friction interface was measured using Infrared thermal imager.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.14-22
• /
• 1999

본 연구는 일반적으로 소·중용량의 냉동·공조기에 많이 사용되고 있는 플레이트 핀 코일형 공냉응축기를 대상으로 수치해석에 의해 응축기의 특성을 파악하였다. 해석에서는 응축기를 과열증기영역, 2상영역 및 과냉각액영역으로 구분하여 공냉 응축기의 성능에 큰 영향을 미치고 있는 공기온도, 공기측열전달률, 입구 냉매온도, 응축온도 및 질량유량 등을 파라메터로하여 이들의 상호관계와 이들이 응축완료점까지의 거리 및 방열량 등에 미치는 영향을 파악하였다. 해석결과로는 해석모델로부터 각 영역의 냉매 상태량, 온도분포 및 열전달률을 구할 수 있었고, 일반적으로 응축기의 성능에 많은 영향을 미치는 각종 파라메터들을 중심으로 광범위한 동작조건에서 이들의 상관관계 및 특성을 파악하므로서 응축기 설계를 위한 기초 자료 및 설치장소나 주위환경 등에 따라 서로간에 다양한 영향을 미치는 실제장치의 동적특성 해석을 위한 자료를 얻을 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.220-223
• /
• 2004

The initial conditions such as the film thickness and the void fraction at the onset of annular flow are required for the analytical dryout model. The Disturbance Wave Instability model(DWI model) is one of the model describing the Annular-to-Intermittent Flow regime Transition(AIFT). The experimental CHF conditions for the uniformly heated tube were compared with the predictions by the modified Levy model, for which the initial conditions at AIFT were estimated by the DWI model. For the flow through long tubes with small inlet subcooling, the effect of AIFT model on the dryout prediction was little. However, the use of DWI model gave better prediction of CHF in a short tube.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.409-412
• /
• 2006

Bulk metallic glass (BMG) strips of $Cu_{54}Ni_6Zr_{22}Ti_{18}$ were produced by warm rolling of the amorphous powder canned with copper. Controlling of temperatures of the rolled sample and rolls was essential for the successive rolling process. Because improper controlling of the sample temperature gave rise to the crystallization of BMG loading to the catastrophic fracture of BMG strips, the temperature of rolls should be properly controlled for achieving successful powder rolling of BMG. The variations of the strain state and temperature in the roll gap was simulated by the finite element method(FEM) using various roll temperatures.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.513-514
• /
• 2006

A CFD analysis for a thermal mixing experiment during steam jet discharge was performed to develop the analysis methodology for the thermal mixing between steam and subcooled water and to find the optimized numerical method. In the CFD analysis, the steam condensation phenomena by a direct contact was modelled by the so-called condensation region model. The comparison of the CFD results with the test data showed a good agreement as a whole, but a small temperature difference was locally found at some locations. However, the commercial CFD code of CFX4.4 together with the condensation region model can simulate the thermal mixing behaviour reasonably well when a sufficient number of mesh distribution and a proper numerical method are adopted

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.694-698
• /
• 2007

This present study has dealt with the effect of surfactant on the freezing of aqueous solution Sodium chloride aqueous solution was used to measure the effect of surfactant and the main parameters of this experiment were temperature of bath, revolution of stirrer. and the radial velocity of NaCl solution. The acquired main conclusions are as follows; 1) the lower super-cooling temperature make hardly to attach the ice on beaker, 2) the size of ice become smaller to add the surfactant, 3) the ice packing factor increase with increasing of stirrer revolution.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.533-538
• /
• 2009

The present study has been conducted to an analysis of two stage refrigeration cycle with alternative refrigerant R410A. In the analysis, single stage cycle (R22 and R410A) compared to COP changing with supercooling degree. Secondly, two stage refrigeration cycle is investigated to the existence of intercooler or supercooler. At results, supercooler contributes to the increase of cooling capacity and the decrease of COP.

• Journal of computational fluids engineering
• /
• v.14 no.1
• /
• pp.45-52
• /
• 2009

Ice accretion may occur when the sold surface passes through the clouds containing supercooled water droplets. In the case of aircraft, it can result in serious performance degradation and safety hazard. In this study, numerical analysis code has been developed to predict the rime ice shapes on a 2-D airfoil and the computation results are validated against experimental data of NASA and other computation results of well-known ice prediction code, LEWICE. In addition, the effects of various numerical parameters on the ice shape have been systematically investigated.