• Title/Summary/Keyword: 공진 파장

Search Result 237, Processing Time 0.033 seconds

Unidirectonal single-mode operation of a Nd:YAG laser by using a planar semimonolithic ring cavity (평면 반일체 고리형 공진기를 이용한 Nd:YAG 레이저의 단방향 단일 모드 발진)

  • 박종락;이해웅;윤태현;정명세
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.4
    • /
    • pp.311-317
    • /
    • 1999
  • Unidirectional single-mode operation of a diode-pumped Nd:YAG laser with a planar semimonolithic ring cavity has been demostrated at 1064 nm. The semimonolithic cavity consists of a laser active medium placed in a magnetic field, a crystal quartz plate, and an output coupling mirror. They form an optical diode by acting each part as a Faraday rotator, a reciprocal polarization rotator and a partial polarizer, respectively. An eigenpolarization theory for the cavity configuration was presented and losses for the eigenmodes were calculated. A pump-limited single-mode output power of 155 mW and a slope efficiency of 17% were obtained when the laser was pumped by a 1.2 W, 809 nm diode-laser. A laser linewidth of less than 100 kHz is inferred from a beat note frequency spectrum between two identical laser systems and continous single-mode tuning range was more than 2 GHz.

  • PDF

Thermo-Optically Tunable Filter Using Evanescent Field Coupling Between Side-Polished Polarization Maintaining Fiber and Polymer Planar Waveguide (측면 연마된 편광유지 광섬유와 폴리머 평면도파로 사이의 소산장 결합을 이용한 열 광학 가변 필터)

  • 윤대성;김광택
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.2
    • /
    • pp.33-38
    • /
    • 2004
  • We have demonstrated a tunable Inter based on an asymmetric directional coupler made of a side-polished polarization maintaining fiber coupled with a polymer planar waveguide. The thermo-optic effects of the polymer planar waveguide induced by a micro-strip heater placed on the top layer of the device leads to shift of resonance wavelength of the coupler. The fabricated device exhibited wide tunable range exceeding 230 nm with 720 ㎽ of applied electrical power.

Dye Laser Oscillator with System Monitoring Longitudinal Mode of Lasing Frequency (발진된 주파수의 종모드를 모니터하는 시스템이 부착된 색소 레이저 발진기)

  • Im, Kwon;Ko, Do-Kyung;Park, Sung-Hee;Kim, Yong-Ki;Cha, Byung-Heon;Kim, Chul-Joong
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2002.07a
    • /
    • pp.62-63
    • /
    • 2002
  • 파장가변 색소 레이저 발진기는 반사형 회절격자에 비스듬히 입사하는 Grazing Incidence형 공진기 구조로 설계되었다.[1-2] 색소용액이 고속으로 순환되는 색소 셀에 여기광인 레이저 광원을 입사시키는 방법은 색소 셀과 색소 용액 순환방향 및 펌핑 광의 방향이 서로 수직을 이루도록 구성되어 있다. 또한, 두 개의 펌핑 광을 양방향에서 동시에 입사시킬 수 있도록 함으로써, 색소 셀 내부의 색소 용액이 여기 광을 균일하게 흡수하도록 설계하였다. (중략)

  • PDF

The Fabrication of a SAW Resonator Filter Using the Coupling-of-mode Method (결합 모드 방법에 의한 표면 탄성파 공진자 필터 제작)

  • 유일현;권희두
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.1
    • /
    • pp.17-23
    • /
    • 1998
  • 본 논문은 높은 전기 역학적 결합 계수를 갖고 있는 64°LiNbO3기판에 leaky표면 탄성파를 이용하여 종 결합 형태의 대역이 넓고, 손실이 적은 필터의 제작을 위한 연구이다. 이 기판 위에 1차 모드와 2차 모드를 이용하고 입력 IDT와 출력IDT사이의 거리, 그리고 전 극의 두께 및 전극 개수를 적절하게 조절하므로서 통과 대역 폭이 15MHz이상, 삽입 손실 1.28dB 및 저지대역 50dB인 특성을 얻을 수 있었다. 아울러, 전극의 두께는 파장과의 비를 고려해 2500Å으로 할 때 최적의 결과를 얻을 수 있었으며, IDT와 IDT 사이의 거리는 0.25 λ, IDT와 반사기 사이의 거리는 0.46λ로 할 때 가장 이상적인 결과를 얻을 수 있었다. 제 작한 필터는 329.3MHz의 중심 주파수를 갖고 있는 소자로서 소형이고 낮은 삽입 손실을 갖 고 있으며, 무선 호출기에 사용 가능하다.

  • PDF

Spontaneous emission of organic light emitting material using an optical-microcavity structure (광학적 미세공동 구조를 이용한 유기발광물질에서의 자발방출)

  • 정부영;김남영;이창희;이석목;황보창권;설창
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.318-319
    • /
    • 2000
  • 1987년에 Tang과 VanSlyke가 유기발광물질중의 하나인 8-hydroxyquinoline aluminum(Alq$_3$)을 사용하여 유기발광소자의 특성[1]을 발표하였으며, 1990년에 영국의 Cambridge대학 Cavendish 연구소는 Poly(p-phenylene vinylene)[2]를 이용한 고분자 발광소자의 특성을 보고하였다. 저분자와 고분자를 이용한 이 두 편의 논문은 낮은 인가전압, 높은 형광효율, 반도체의 성격을 보고하고 있다. 이와 같은 특성들은 실질적인 전기 발광소자에 대한 적용 가능성 및 대형 디스플레이에 대한 개발 잠재력[3]을 시사하고 있다. 특히 본 연구에 사용된 Fabry-Perot 공진기 형태의 광학적 미세공동구조는[4,5] 발광파장을 조절할 수 있을 뿐만 아니라 에너지 재분포로 인해 발광세기를 향상시킬 수 있다는 점에서 다른 EL소자들이 가지는 일반적인 구조와 대조되는 장점을 가지고 있다. (중략)

  • PDF

Effect of Swirl Injector with Variable Backhole on Acoustic Damping in Liquid Rocket Engine (액체로켓 스월인젝터의 음향학적 감쇠기능)

  • ;;;;;;Bazarov, V. G.
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.34 no.8
    • /
    • pp.79-86
    • /
    • 2006
  • Swirl injector with adjustable backhole length was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of variable backhole injector as an acoustic absorber, backhole injector was regarded as a quarter-wave resonator. As a result of theoretical approaches and acoustic tests, backhole injector with adjustable length could decrease the unstable modes of combustion chamber. And the damping efficiency was estimated by measuring damping rates experimentally.

Effect of Surface Recombination on the Light-Emitting Property of Two-Dimensional Photonic Crystals (표면 비발광 결합이 2차원 광결정의 발광 특성에 미치는 영향)

  • ;;;R. Sellin;D. Birilberg
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2001.02a
    • /
    • pp.20-21
    • /
    • 2001
  • 광결정(photonic crystal)은 빛의 파장 크기 정도의 격자 상수를 지닌 1차원, 2차원, 또는 3차원의 주기적인 구조이다. 최근에 2차원 광결정 공진기 구조에서 광펌핑으로 레이저 발진이 성공한 결과가 발표되면서 광결정 구조를 이용한 광소자로의 응용이 본격적으로 시작되고 있다. 하지만, 2차원 광결정 발광 구조에서는 능동 매질이 공기 중과 접한 영역이 넓어서 필연적으로 면에서의 비발광 결합이 중요한 문제가 된다. 이러한 문제 때문에 반도체에 기반한 광결정 구조 중에서는 비발광 결합이 비교적 적은 InP/InGaAsP 계열 물질이 능동 매질로 이용되어 왔다. 본 연구에서는 광결정 발광 구조에서 표면 비발광 결합이 실제로 어느 정도나 영향을 미치는가에 대한 연구를 수행하였다. (중략)

  • PDF

Elimination of polarization dependency of fiber-to-planar waveguide couplers using a half-waveplate (반파장판을 이용한 광섬유-평면도파로 결합기의 편광 의존성 제거)

  • Lee, Kyu-Hyo;Kim, Hyo-Kyeom;Kim, Kwang-Taek
    • Korean Journal of Optics and Photonics
    • /
    • v.16 no.2
    • /
    • pp.138-142
    • /
    • 2005
  • In this paper, a method to eliminate the polarization dependent properties of fiber-to-planar waveguide couplers using a thin half-waveplate is proposed and demonstrated. The operation principle of the device is explained and the fabrication technology is presented. It is experimentally shown that the resonance wavelengths of the device are independent of the polarization state of input light.

Pulse Compression of an Additive-Pulse Mode-Locked CW Nd:YLF Laser by Using an Optical Fiber and a Grating Pair (광섬유와 회절격자쌍을 이용한 Additive-Pulse Mode-Locking된 CW Nd:YLF 레이저의 광펄스 압축)

  • 안승준
    • Korean Journal of Optics and Photonics
    • /
    • v.4 no.1
    • /
    • pp.66-72
    • /
    • 1993
  • Additive-pulse mode-locking (APM) was performed in a $1.053{\mu}m$ cw Nd:YLF laser by coupling a nonlinear external external cavity to the main cavity. The APM pulsewidth was 4.5 ps and the average output power was 1.5 W. This APM pulse was compressed by an optical fiber and a grating pair to be as short as 210 fs with a peak power of 17 kW.

  • PDF

Laser doppler velocimeter using the self-mixing effect of a $CO_2$ laser (산란광의 되먹임을 이용한 $CO_2$ 레이저 도플러 속도 측정)

  • 최종운;김용평;김윤명
    • Korean Journal of Optics and Photonics
    • /
    • v.7 no.2
    • /
    • pp.157-161
    • /
    • 1996
  • A simple laser Doppler velocimeter(LDV) using a $CO_2$ laser with its self-mixing effect has been developed. We measured the laser power which was modulated by Doppler frequency, when monochromatic laser light was focused to a moving target. The Doppler-shifted frequency was controlled by changing rotating speed of the turntable or the cosine of the angle between the direction of the laser beam and that of the rotating velocity.

  • PDF