• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.74-78
• /
• 2011

In this paper, the bandpass filter for ITS system of 5.8 GHz is proposed by using the dual-mode resonator with the radial stub. As alternating the open stub with the radial stub, the size of the dual mode resonator can be reduced about 39.6% and the out-of-band characteristics of the bandpass filter using dual mode resonator can be enhanced from 19.4 dB to 29.1 dB by using the stub of $6.9{\Omega}$ i.e. realized by parallel two radial stubs with $60^{\circ}$ angle. The fabricated bnadpass filter using the dual mode resonator has the center frequency of 5.72 GHz with the fractional bandwidth of 4.1%. Also, the filter has the insertion loss and return loss of 1.79 dB and 19.4 dB, respectively.

• Korean Journal of Optics and Photonics
• /
• v.27 no.5
• /
• pp.181-187
• /
• 2016

We report on the parameter-dependent optical characteristics of the unidirectional single-mode lasing square ring cavities. Using the taper-step section in the square cavities, the resonant direction can be selected and we characterize the optical losses by changing the taper lengths. Various kinds of square ring cavities are fabricated, based on InGaAsP/InGaAs multiple quantum well semiconductor materials. From the experimental results we obtain the optimized taper length for a given device structure, while maintaining unidirectional single-mode lasing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.633-640
• /
• 2002

In this paper, the small chip meander antenna for dual-frequency operation is presented. The proposed chip meander antennas was fabricated by the ceramic chip using LTCC-MLC process. It is a novel compact dual-frequency design using a meandered patch that achieves more degrees of freedom for adjusting dual-frequency operation and the size reduction with narrow frequency ratio. And it is proposed that the 3D structure for additional size reduction of the meander antenna. The size reduction of the 3D meander antenna is as large as 50 % as compared to the design for dual-frequency operation not using 3D structure. It is observed that the principle of dual-frequency operation through current distribution, return loss and radiation pattern.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.123-128
• /
• 2022

Applying rigorous modal transmission-line theory (MTLT), the properties of resonant diffraction gratings under conical light incidence is investigated. The mode vectors pertinent to resonant diffraction under conical mounting vary less with incident angle than those associated with diffraction gratings in classical mounting. Furthermore, as the evanescent diffracted waves drive the leaky modes responsible for the resonance effects, the conical mounting imbues diffraction gratings with larger angular tolerance than their classical counterparts. Based on these concepts, the angular-spectral and wavelength-spectral performance of resonant diffraction gratings in conical and classical mounts by numerical calculations with spectra found for conical incidence are quantified. These results will be useful in various applications demanding resonant diffraction gratings that are efficient and physically sparse.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2002

This paper proposes a new improved lumped element equivalent circuit analysis method to analyze withdrawal weighted SAW resonators of irregular electrode configurations, which enables to calculate the frequency response of withdrawal weighted SAW resonators. This method has led to the derivation of Smith equivalent circuit's y-parameters for a single ground electrode and formulated the resonator's admittance by calculating the total current into an IDT assembly. To illustrate the effectiveness of the technique, this method was applied to the design of a simple ladder filter and the change of the filter performance was investigated in relation to the weighting of the series and parallel resonators, respectively. The results shows that the withdrawal weighted resonator ladder filters provide better performance in their bandwidth and transition characteristics than normal ones. This new equivalent circuit analysis method can also serve as a better tool to design and analyze general SAW resonator filters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.424-429
• /
• 2016

This paper presents dual-mode ring-resonator bandpass filter using LUC of artificial-transmission-lines. The conventional ring-resonator bandpass filter has limitation in miniaturization because the conventional ring-resonator is based on a one wavelength operation, and problem due to undesire harmonics. The ring-resonator bandpass filter is miniaturized and show higher order mode rejection by configuring a ring-resonator with LUC of artificial-transmission-lines. The two-stage bandpass filter is designed and fabricated with a ring-resonator and input/output interdigital coupled line. A fabricated filter shows dual-mode, rejection of whole ultra wide band, sharp skirt characteristics and has ring area reduced by 60 % compared to the conventional ring-resonator bandpass filter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.41-49
• /
• 2013

This paper suggests the dielectric resonator antenna using LTCC process for mm-wave car radar system. In this paper, dielectric resonator antennas (DRA) operated in 76-77 GHz frequency band are designed. And, using the LTCC process, the structures of dielectric resonator with SRR (split ring resonator) inside and those of dielectric resonator with probe inside are suggested. Linear polarization antennas and circular polarization antenna are designed for the DRA with probe inside. Three kinds of the DRA antennas are designed and their characteristics are calculated using CST RF simulation tool. The designed antennas are fabricated and measured and the measured results are compared with calculated results. The measured operating frequencies of DRAs are within 76 GHz to 77 GHz, which are close to the calculated results, and the measured gains are about 8.15 dBi to 10.82 dBi.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.131-134
• /
• 1992

해양에서 자연적으로 형성된 기포 또는 기포집단의 그 자체의 공진특성에 의해, 해중에서 사용하는 음파의 전달과정에 여러 가지 영향을 미칠 수 있음이 제기되어 왔다. 본 실험은 기포집단이 수중에서 음파의 전달과정에 어떤 영향을 주는가를 알아보기 위한 것으로, 수중에 수직형태의 판형기포 집단을 발생시켜 1 kHz ~ 100 kHz의 주파수를 가지는 음파를 각각 투과시킴으로써 주파수별 음파전달손실을 측정하였다. 측정결과, 개개 기포의 공진주파수 영역에서 투과손실이 최대가 됨을 알 수 있었고, 그 이하의 주파수영역에서는 기포판의 두께공진모드에 의한 변화가 관측되었으며, 공진주파수 이상의 고주파수영역에서는 주파수 증가에 따라 투과손실이 감소하는 현상을 알 수 있었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.44-45
• /
• 2000

GHz 급의 아주 높은 반복율을 가지면서, 피코초 단위의 펄스 열을 발진시키는 레이저를 만들기 위해 능동형 모드록킹 방법을 이용하였다. 이 방법은 공진기안에 광 변조기를 삽입하고, RF 신호를 가하여 시간적으로 공진기내에서의 손실을 변화시키는 방법이다.$^{(1)}$ 공진기 길이를 충분히 길게 하면서도 고 반복율을 가지는 레이저를 만들기 위해 조화 모드록킹 방법을 사용했는데, 이는 레이저 펄스의 반복율을 공진기 길이에 의한 기본 반복율의 정수배가 되도록 하는 방법이다.$^{(2),(3)}$ 3차 조화 모드록킹 방법을 이용한 Nd:YLF 레이저 시스템을 그림 1에서 나타내었다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.128-129
• /
• 2000

단원자를 이용한 Cavity-QED 실험등을 위해서는 고분해능 분광학이 필요하다. 레이저 주파수 안정화는 고분해능 분광학을 위한 필수적인 선결 과제이다. 본 연구에서는 다이오드 레이저를 대상으로 전류되먹임 방법에 의해 주파수 안정화를 하였다. 오차 신호를 얻기 위해 공진기를 사용하였는데 공진기는 원자 전이선을 이용한 경우보다 더 높은 신호 대 잡음비를 얻을 수 있다. 일단 공진기에 안정화된 레이저는 주파수 특성을 그대로 유지한 채 AOM이나 EOM 등을 이용하여 필요한 원자 전이선으로 주파수 이동시켜 고분해능 분광에 활용할 수 있다. (중략)