• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.113-115
• /
• 2005

본 연구는 저전압 교류 전류원으로부터 직류 부하에 에너지를 공급하기 위하여, 새로운 컨버터를 제안한다. 컨버터는 풀브리지 MOSFET 정류기와 플라이백 컨버터의 2단 구조로 구성되어 있으며, LC공진을 이용하여 AC/DC 전력변환을 수행한다. 컨버터 효율 개선을 위하여 컨버터 회로 내의 스위칭 소자는 3상한에서 동작한다. 제안된 컨버터의 동작원리 및 동작모드를 해석하고, 시뮬레이션을 통해 해석결과를 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.345-346
• /
• 2012

본 논문에서는 공진탱크만으로 고승압(>10)을 성취할 수 있는 새로운 비절연 컨버터를 제안한다. 제안한 컨버터는 스위치의 ZVS 턴온 및 다이오드의 ZCS 턴오프가 가능하여 스위칭 손실을 최소화 할 수 있으며 스위치의 전압정격이 출력전압보다 작아 작은 도통손실을 갖는 소자 선정이 가능하다. 제안하는 컨버터의 동작원리를 제시하고 실험을 통하여 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.161-162
• /
• 2018

철도챠량에서 일반적으로 사용되는 상용전원은 보조전원장치(이하 SIV)로 불리는 전력변환장치로부터 공급된다. 본 논문에서는 LLC 공진형 컨버터를 적용하여 스위치의 영전압 스위칭(Zero-Voltage-Switching, ZVS)을 통해 높은 효율을 달성하고, 고속스위칭에 의해 인덕터, 커패시터, 트랜스포머와 같은 소자의 부피를 줄이고 시스템의 효율을 높여 기존의 보조전원장치보다 약 40%이상 소형 경량화가 가능한 보조전원장치에 대한 연구를 소개한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.899-903
• /
• 2003

In this paper, a wide band helical antenna for mobile handset using parasitic element effect has been investigated. To obtain the effect of parasitic element, we utilized the cylindrical conductor which is not feed. As thickness of cylindrical conductor is increasing, second and third resonance frequency become abruptly variable. In case of that 4.5mm diameter parasitic element cylindrical conductor is inserted, normal mode helical antenna obtained bandwidth of around 900 MHz on the limit of R. L., - 5 dB.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.39-43
• /
• 2012

60GHz band RF transceiver was made with the NRD waveguide structure for the point- to-point communication. A dielectric line that of comprising NRD waveguide was the milling process was not easy because a material gets soft, and also compression and expansion according to a temperature were serious, so this line was not suitable for the device in which the resonance characteristic was important. In addition, the thing for comprising amplification module was difficult in the NRD waveguide structure. In this paper, a way in which to overcome mentioned in upper part, the transceiver was made by below technology. Components in which the resonance characteristic was not important were made with the NRD waveguide hybrid IC, and components in which the resonance characteristic was important were made with waveguide. An amplifier packaged and modularizing the bare chip, it equipped at the NRD waveguide within. Manufactured transceiver communicated with FDD method, and it had 10dBm output power, and -60dBm minimum receive sensitivity.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.15-21
• /
• 2000

Optical fiber temperature sensor, using resonance wavelength shifting of single mode fiber-to-planar waveguide coupler by heat, was fabricated. Thermo-optic polymers, have large change of refractive index due to heat, were used for planar waveguide. The device fabrication procedure including fiber polishing steps was illustrated and the device structure with independent polarization was demonstrated experimentally. The resonance wavelength difference of fabricated device was less than 2nm. The resonance wavelength shifting owing to temperature variation, from room temperature($24^{\circ}C$) to $90^{\circ}C$, was showed $-0.54nm/^{\circ}C$, $-3nm/^{\circ}C$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.343-354
• /
• 2009

In this paper, a magnetic-less dc-dc switching converter realizing an integrable power conversion system is described. Instead of magnetic devices, the inductive impedance range of piezoelectric transducers is utilized to store and resonate the energy for soft-switching. Piezoelectric devices have no windings and deliver the power by the electrodes, which lead to mass product through semiconductor-manufacturing process. This paper presents a resonant-type step-up dc-dc power converter employing a disk-type piezoelectric transducer, analyzing the operation principles and the frequency control characteristics. Also, a topology extension of the single stage converter into cascaded multi-stage is presented and analyzed with the operation principles and control characteristics. For verification of the analysis, a 10W output dc-dc power converter hardware was implemented. The hardware experiments shows a good frequency control and power efficiency greater than 96% in the single stage. A hardware prototype of the extended multi-stage one was also realized and tested. The results shows that the converter has the same frequency control performance and high efficiency such as 93%.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.113-122
• /
• 1999

A new resonant switching Watkins-Johnson converter was proposed, which minimizes the switching loss and is well suited for high-frequency operation. The steady-state analyses revealed that the voltage gain of the proposed converter is solely determined by the switching frequency. Consequently, to regulate the output voltage of the converter for variable load current the switching frequency should be varied accordingly. Based on the results of analyses, an optimum design procedure for the resonant component values is proposed, which minimized the voltage stress of power switch while maintaining the desired property of zero-voltage switching. Finally, accuracy of analyses and validity of an optimum design procedure are verified on an experimental resonant switching Watkins-Johnson converter prototype.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.28-29
• /
• 2017

기존의 위상천이 풀 브리지 DC/DC 컨버터의 경우 변압기의 누설 인덕턴스와 2차 측 정류 다이오드의 기생 출력 커패시턴스 사이의 공진으로 인하여 정류 다이오드 양단에 큰 공진 전압이 발생하며, 이는 소자의 신뢰성 저하 및 시스템의 전력 변환 효율을 감소시킨다. 반면 LLC 공진형 컨버터는 2차 측에서 발생되는 공진 에너지가 출력 커패시터로 흡수되지만 경 부하시에 높은 스위칭 주파수로 인하여 효율이 저감되며, 출력 전압을 제어하기 위해 추가적인 부하저항이 요구된다. 따라서 최근에는 LLC 공진형 컨버터로 동작시키면서도 PWM 제어를 통해 출력전압을 제어하는 방법이 연구되고 있으나, 새로운 게이트 구동 방식을 위해 DSP 제어를 사용하고 있다. 따라서 본 논문에서는 산업에서 많이 사용되고 있는 아날로그 IC를 통해 동일한 동작 및 성능을 구현시킬 수 있는 방법에 대하여 제안한다. 본 논문에서는 제안된 방식의 타당성을 검증하기 위하여 이론적으로 분석하며, 6.6kW급 시작품을 제작하여 제안방식의 타당성을 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.