• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.413-414
• /
• 2015

본 논문에서는 트랜스포머를 공유하는 다입력 LLC 공진형 컨버터를 설계하기 위한 과정을 제시한다. 전원 종류에 따라 다입력 전원을 배터리 충전기에 사용되는 LLC 공진형 컨버터의 공진 네트워크를 설계한다. 시스템 효율을 증가시키기 위해 비대칭 듀티 제어법을 적용하였으며, 2.2kW/600W급 배터리 충전기를 제작 구현함으로써 설계과정의 타당성을 검증한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.886-893
• /
• 2004

In this paper, active resonator oscillator using active band pass filter with gain, active resonator with negative resistance using transistor(agilent ATF-34143) is designed and fabricated. Proposed active resonator oscillator for local oscillator in ISM band(5.8GHz) is designed with 5.5 GHz oscillation frequency. Designed active resonator oscillator implemented on the substrate which has the relative dielectric constant of 3.38, the height of 0.508mm, and metal thickness of 0.018mm. Active resonator oscillators using active band pass filter with gain show the oscillation frequency of 5.6GHz with the output power of -2dBm and phase noise of -81dBc/Hz at the offset frequency of 100kHz. Active resonator oscillators active resonator with negative resistance show the oscillation frequency of 5.6, 5.8GHz with the output power of -4dBm and phase noise of -91dBc/Hz at the offset frequency of 100kHz.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.25-30
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectanglar Split Ring Resonator (R-RSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. the size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.41-45
• /
• 2015

In this paper, the single port dual-band resonator for magnetic resonance wireless power transfer is proposed. The proposed dual-band resonator is consists of 20 turns spiral coil, a single loop, matching circuit, lumped elements, and a single port. The two sides of the matching circuit are connected to via holes. The spiral coil is operated at MF-band and single loop is operated at HF-band, respectively. We use two of the same structure resonators and simulated and the power transfer efficiency was calculated. The efficiency of simulation and measurement is above 60% at the MF and HF bands, and the distance is 100 mm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.992-995
• /
• 2018

The wireless charging of body-embedded medical instruments and wireless power transfer to various inside dielectric-materials is still a future technology that has not yet been achieved. This paper proposes methods for controlling the capacitance of the resonators and installing air pockets on the top and bottom sides of the resonators for optimal design, which considered efficiency and resonant frequency in accordance with the electromagnetic characteristics of the dielectric medium. In future, the results of this research will be utilized as the basic research data to design and restore resonant frequency of resonators embedded in various dielectric environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.925-933
• /
• 1991

Caracteristics of cylindrical rectanyular patch microshtrip resonator are analyzed by cavity model. To minimize the error of resonant frequency due to fringing field, the resonant frequency is calcylated by the concept of effective dielectric constant. The transmisson type resonator operating at 3GHz is designed and manufactured. The measured data of the resonant frequency and reflection loss are 3.019Ghz and \ulcorner32.78dB respectively. These results nearly coincide with theoretical results.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.431-432
• /
• 2020

철도차량 하부에 부착되는 전장품 무게는 차량의 바퀴 및 베어링 등 철도차량 수명에 큰 영향을 주기 때문에 경량화는 필수적이다. 본 논문에서는 철도 차량용 보조전원장치의 경량화를 위해 LLC 공진형 컨버터를 적용한 보조전원장치 시스템과 제어알고리즘을 제안한다. 제안하는 알고리즘은 고속스위칭을 위해 입력단 벅 컨버터를 이용하여 가선 전압을 감압시키고 이후 LLC 공진형 컨버터를 통해 인버터 입력단 전압을 제어한다. 또한, 공진형 컨버터 손실을 최소화하기 위해 ZVS(Zero Voltage Switching) 동작을 하며, 공진 탱크의 최적 설계도 제안한다. 본 논문에서 제안하는 알고리즘은 시뮬레이션 및 실험으로 검증한다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.288-293
• /
• 2003

In this paper, Filter could use to IMT2000 repeater using resonator of Comb-line form that has waveguide structure and designed. Coupled resonators designed using slot in wall between resonators to compact. 5-stage resonators have equal structure and input and output part was optimized to get into minimum impedance. Band pass filter characteristic satisfied design condition as result that used Chebyshev function that have 0.2 dB ripple and analyze using simulation tool.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.267-276
• /
• 1999

A 2 stage 6-pole bandpass filter (BPF) is designed and implemented by using K-band triple-mode cavity. The BPF has an 100MHz bandwidth at the center frequency of 18.5GHz and the response of the filter is Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. To obtain a Chebyshev response, the intercavity coupling between the adjacent cavities is accomplished by H-field component of TE modes parallel to slot plate. In this paper, the size and location of intercavity slot are determined by the detailed coupling equation from H-field of TE resonant modes in circular cavity. The measured results agree well with the theoretical one.