• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.952-962
• /
• 2015

In this study, multilayered rings with a large outer diameter have been developed using a hot ring rolling process. The ring rolling process has been analyzed by rigid plastic finite element analyses (FEA) using the AFDEX2D and AFDEX3D/HEXA/RING simulators, where the finite element meshes received severe plastic deformation are remeshed into a fine mesh-size using a dual-mesh system. According to the simulated results, the design variables of the multilayered rings were determined and real tests were conducted to check the validity of the simulation results. By adopting the hot ring rolling process, the input weight of raw materials was reduced by 40% against the conventional hot forging process and that the recovery rate was increased by 24%. The measurement of the averaged roundness was satisfied within 0.5 mm for both the inner and outer diameters. Moreover, the hot ring rolling processes yielded 1.49 Cpk for the outer-diameter and 0.84 Cpk 0.84 for the inner-diameter.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.581-591
• /
• 2013

제조공정에서 사용되어 지는 SPC(Statistical Process Control)관리 기법은 가피원인을 탐지하여 변동을 감소시키는 통계적 공정관리 시스템이다. SPC의 대표적인 관리 기법으로는 Shewhart관리도, Cusum관리도, EWMA관리도가 있으며 이러한 관리 기법들은 공정을 보다 안정적으로 관리 할 수 있도록 유지 및 예측하는데 사용 되어 진다. 하지만 제조 공정의 유형에 따라 샘플링 방법, 관리한계선 등을 다양하게 설정하여 보다 효율적인 관리를 모색하고 있다. 공정 형태에 따라 다양한 관리 방법과 분석 결과가 나타난다. 일반적으로 Xbar-R 관리도와 같은 Shewhart 관리도를 사용하지만 Batch 단위의 공정, 연속 공정의 라인에서 사용되기에는 부분적인 한계를 보이고 있다. 본 논문에서는 일반적인 관리도와 공정 변화에 민감하게 반응 할 수 있는 누적합 관리도와 지수가중치이동평균 관리도를 비교해 보고 작은 변동에 대한 탐지 능력이 우수한 지수가중치이동평균 관리도에 대한 연구동향과 사례를 분석하여 제조 공정에 적합한 관리 방법을 모색하고자 한다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.375-376
• /
• 2022

본 연구는 자율 안전을 통한 안전의식 증진 사망재해 빈도율BOTTOM UP, 자아욕구 맥그리거 이론을 반영한 근로자 능력과 동기부여 제공시 능력치를 향상시키는 내용을 토대로 작성되었다.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.3
• /
• pp.507-514
• /
• 2005

In this paper we consider an operating methodology of SPC(statistical process control) system in the TFT-LCD industries. The main contents are real time process monitoring, significant difference test, outlying glass analysis, process capability analysis and chart viewing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.322-327
• /
• 2020

An Armor Piercing Fin Stabilized Discarding Sabot (APFSDS), which penetrates and sabotages the target by physical energy, consists of a general penetrator using Depleted Uranium (DU) or Tungsten Heavy Alloy (THA) but THA is preferable because of manufacturing and environmental issues. On a THA penetrator, the penetration performance is determined mainly by self-sharpening depending on the hardness and toughness of materials. In particular, the tensile strength and impact strength work as key factors. The correlation coefficient for the penetration performance of the tensile strength was 0.721 and the impact strength was -0.599. The improved penetration performance by additional heat treatment was proven experimentally. Therefore, maintaining elongation over 9 % and tensile strength over 123 kg/㎟ is desirable, and the impact strength should be less than 6.8 kg·m/㎠ for good penetration performance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.94-98
• /
• 2000

본 논문은 TFT-LCD 모듈 조립 공정에서의 스케줄링 시스템을 제안한다. TFT-LCD 모듈 조립 공정은 선행 공정인 액정 공정에서 넘어오는 LCD 판넬과 기타 부품들을 조립하여 최종 완제품을 만드는 공정이다. 본 연구에서 다루고 있는 문제는 주문량으로부터 구해지는 일일 생산 계획량이 주어졌을 때 각 라인에서 생산되어질 제품을 배정하는 문제이다. 본 논문의 목적은 주어진 실제 공정 환경에서 일일 생산 계획량을 최대로 만족하기 위한 스케줄링 휴리스틱을 개발하는 것이다. 이를 위해 relaxed LP 모형을 제시하였고 제시된 LP 모형을 이용한 알고리즘을 개발하였다. 제안된 알고리즘은 제품 우선 배정 조건, 현 보유 자재량과 대략적인 라인의 생산 능력을 고려한 LP 프로시져 부분과 제품 간 셋업 시간을 고려한 설비 배정 휴리스틱의 두 부분으로 구분된다. 알고리즘의 성능 검사를 위해 실제 TFT-LCD 모듈 공정에서의 데이터를 이용하여 과거에 실제 이루어진 생산 결과와 비교를 하였으며 제안된 알고리즘의 효율성을 실험 결과를 통해 보였다.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.345-350
• /
• 2014

The most important decision of process planning for the manufacturing system is the machine selection problem to minimize machining costs. Each machine has its own different machining performance indicating a different fraction of scrap, making the cost of scrap generated by machining is different for each machine. Therefore, when we decide on machine selection, we must consider the machining cost and the cost of scrap generated. This paper describes the statistical model for the fraction of scrap generated by machining and the machine selection algorithm considering the total cost including the machining cost and the cost of scrap generated.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.

• Agrochemical news magazine
• /
• v.18 no.4 s.139
• /
• pp.22-23
• /
• 1997

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1999.04a
• /
• pp.93-93
• /
• 1999