• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.73-82
• /
• 2017

In Korea, previous certification of water supply infrastructure was mainly focused on economical and physical aspects. Recently, hygienic safety of water supply service has become a sensitive and important issue to our people for evaluating the water quality with growth of economy and education system. According on water quality in 497 Korean water supply facilities, pH values in the supplied water have ranged between 5.8-8.5. However, little is known about metal leachability at the pH conditions observed in the real water supply systems because a fixed pH condition (pH 7.0) has been used in the current standard method, 'Hygienic Safety Testing Method', in water supply. In this work, we examined the effects on heavy metal leachability with pH differences in the water supply pipes which are typically used in Korea. As a result, the amounts of metal leachability were tended to increase when pH levels were decreased. Especially at pH 5.8, Cu leachability from Cu pipes was found to exceed the public health standard level even after applying a normalization factor (NF) given by the current Korea standard method. The Cr and Cu leached from stainless steel pipes, Cd, Pb, Cu, and Zn from Cu-based pipe fittings, and Zn from Zn-based pipe fittings were exceeded the Korean hygienic safety standards while, after applying the NF, concentrations of the leached metals were satisfied with the current Korean standard. The findings from this work provide implications on the needs of reforming the current hygienic safety standard methodology.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.308-308
• /
• 1994

열분석 (DSC, TG/DTA)을 통해 Q-35는 A, B, C의 세가지 다형이 존재함을 알수 있었으며 이중 상대습도에 따른 흡습성의 변화가 적고, 가습에 의해 다형전환이 일어나지 않는 C형이 제제에 유리하다고 사료된다. 또한C형은 분쇄, 연합 및 타정에 의한 다형의 전환이 없었다. Q-35의 용해도는 물, 메탄올, 에탄올에 각각 0.30.3.55,6.31mg/m1 이었으며 PH5이상에서는 급격히 용해도가 감소하고 산성에서는 용해도가 크게 증가하는 양상을 나타냈다. 적층시험, 배합시험을 통해 선정한부형제의 표준 처방 혼합물로 정제를 저조한 결과Q-35의 성형성은 양호하였고 Q-35의 함량이 증가함에 따라 붕해시간이 다소 지 연됨을 알수 있었다. 그러나 Q-35원료는 유동성이 적어 직타법이 적합하지 않았으며, 습식 과립압축법에 따라 저조한 정제의 붕해시간은 5-9분, 15분 후 용출은 91.$\pm$5.0% 이었다. Q-35정제를 4$0^{\circ}C$, 4$0^{\circ}C$ ㆍ 75%RH에서 6개월, 6$0^{\circ}C$에서 3개월 보존후 함량을 측정한 결과 각각 100.0, 98.7, 98.9%이었으며 그밖의 항목에서도 안정한 결과를 얻어 Q-35정제는 온도 및 습도어 안정한 것으로 사료된다. 대량생산 연구결과 Q-35의 결정수가 이탈되지 않도록 건조, 코팅 공정 중 정제의 온도를 5$0^{\circ}C$ 이하로 유지시켰다.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.699-710
• /
• 2006

Batch scale experiments to investigate the efficiency of the solidification process for metal mine tailing treatment were performed. Portland and MSG (micro silica pouting) cements were used as solidifier and three kinds of mine tailings (located at Gishi, Daeryang, and Aujeon mine) were mixed with cements to paste solidified matrices. Single axis com-pressible strengths of solidified matrices were measured and their heavy metal extraction ratios were calculated to investigate the solidification efficiency of solidified matrices created in experiments. Solidified matrices ($5cm{\times}5cm{\times}5cm$) were molded from the paste of tailing and cements at various conditions such as different tailing/cement ratio, cement/water ratio, and different cement or tailing types. Compressible strengths of solidified matrices after 7, 14, and 28 day cementation were measured and their strengths ranged from 1 to $2kgf/mm^2$, which were higher than Korean limit of compressible strength for the inside wall of the isolated landfill facility ($0.21kgf/mm^2$). Heavy metal extractions from intact tailings and powdered matrices by using the weak acidic solution were performed. As concentration of extraction solution for the powdered solidified matrix (Portland cement + Gishi tailing at 1:1 w.t. ratio) decreased down to 9.7 mg/L, which was one fifth of As extraction concentration for intact Gishi tailings. Pb extraction concentration of the solidified matrix also decreased to lower than one fourth of intact tailing extraction concentration. Heavy metal extraction batch experiments by using various pH conditions of solution were also performed to investigate the solidification efficiency reducing heavy metal extraction rate from the solidified matrix. With pH 1 and 13 of solution, Zn and Pb concentration of solution were over the groundwater tolerance limit, but at pH $1{\sim}13$ of solution, heavy metal concentrations dramatically decreased and were lower than the groundwater tolerance limit. While the solidified matrix was immerged Into very acidic or basic solution (pH 1 and 13), pH of solution changed to $9{\sim}10$ because of the buffering effect of the matrix. It was suggested that the continuous extraction of heavy metals from the solidified matrix is limited even in the extremely high or low pH of contact water. Results of experiments suggested that the solidification process by using Portland and MSG cements has a great possibility to treat heavy metal contaminated mine tailing.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.189-193
• /
• 2000

Arsenic (III) and arsenic (V) in disused mine tailing samples have been determined simutaneuously by hydride generation inductively coupled plasma atomic emission spectrometry (HG-ICP-AES). Total arsenic was determined using 2% $NaBH_4$ and 6 M HCl after prereduction of As(V) to As(III) with) 1M KI. Arsenic (III) was determined selectively using citrate/citric acid buffer with range of pH 5-6, it was determined by HG-ICP-AES. Arsenic (V) can be evaluated by the differences. According to the results, arsenic (V) was over 90% among the total arsenic extracted from disused mine tailing samples.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.471-479
• /
• 2009

This study was performed to improve the analytical methods and re-establish the regulatory standard of PCBs-containing solid wastes for sufficient management in which has been concerned internationally. To do this, the sampling, pre-treatment and quantification methods which were used in USA and Japan were discussed. It was thought properly that new standard of PCBs-containing solid wastes was established through correlation with PCBs concentration of transformer oil. The surface wipe sampling was selected in the nonporous materials and cutting sampling in the porous materials. In the absence of transformer oils, electrical equipment is PCB-contaminated if it has PCBs at ${\geq}0.4{\mu}g/100cm^2$ as measured by a wipe test of a nonporous surface and if it has at 0.04 mg/L as measured by cutting test of a porous material. Also, new analytical methods for PCBs containing solid waste were proposed.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.174-181
• /
• 2013

Pyrifluquinazon is classified with a quinazoline insecticide that regulates food intake by controling the feeding behavior acting on the endocrine or nervous system of pests such as aphids and white fly. To keep safety on pyrifluquinazon residues in agricultural commodities a simple, accurate and rapid analytical method was developed and validated using high performance liquid chromatograph (HPLC-UVD). The pyrifluquinazon residues acidified with 1% formic acid in samples were extracted with acetonitrile and partitioned with hexane subsequently to dichloromethane then purified with silica solid phase extraction (SPE) cartridge. The purified samples were detected using HPLC-UVD. The method was validated using apple and pear spiked with pyrifluquinazon at 0.02, 0.05 and 0.1 mg/kg and hulled rice, pepper, soybean at 0.05 and 0.1 mg/kg. Average recoveries were 70.5~107.9% with relative standard deviation less than 10%. The result of recoveries and overall coefficient of variation of a laboratory results in Gwangju regional FDA and Daejeon regional FDA was followed with Codex guideline (CODEX CAC/GL 40). This method is appropriated at pyrifluquinazon residues determination and will be used as official method of analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1239-1244
• /
• 2010

중금속 및 유류 오염토양 정화를 위해 효율적인 토양세척법과 공정 선정을 목적으로 최적의 오염정화 설계인자를 제시하기 위한 실험적 연구를 수행하였다. 실험분석 항목은 구리, 납, 아연을 포함하는 중금속항목과 총석유계탄화수소(TPH)인 유류항목에 대해 흡광광도법(absorptiometric analysis), 기체 크로마토그래피(gas chromatography)법을 이용하여 단계별로 분석하였다. 실험방법은 최적 세척용매 결정시험, 최적 세척시간 도출시험, 최적 진탕비(S/W ratio) 결정시험 등을 통해 얻어진 결과를 토대로 계면활성제 첨가량별 중금속 용출영향 분석시험 순으로 실시하였다. 실험결과 세척용매인 염산 0.1mole, 체류시간 1시간, 진탕비 1:3 조건에서 오염물질의 저감효과가 우수하게 나타났으며, 이들 조건을 적용하였을 때 1%의 계면활성제를 세척용매에 첨가하였을 경우 추가적인 오염물질의 농도 저감효과가 있는 것으로 분석되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1003-1012
• /
• 2007

In this study, we analyzed the release differences for some critical pollution compounds according to the surrounding conditions in order to predict water quality due to the sedimental releases and the release characteristics at different sedimental locations in Lake Leewon, in Tae-An area. COD, nitrogens and phosphates were analyzed using the standard methods for water quality, based on high chloride ion concentration(greater than 2,000 ppm). For COD, the release rate increased in the anoxic basin but almost the same in the oxic basin. For $NH_3$-N, the release rate decreased in the oxic basin as you go A through C point meanwhile, for $NO_3$-N and T-N, the tendency was reversed because of nitrification of them. In the anoxic basin, the release rates of $NH_3$-N and $NO_3$-N went up with A through C path. However, the release rate of T-N was found to decrease. Also, for $PO_4$-P and T-P, the release rates in the oxic basin were lowest at B point mainly because the phosphates were at less released in the highly $O_2$ concentrated environment. In the anoxic reactor, $PO_4$-P was released similarly regardless of the sampling points. In summary, the release rates in the oxic reactor were greater than those in the anoxic reactor for COD and $NO_3$-N. For the other components, the anoxic basin generated the higher release rates.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.547-555
• /
• 2000

The surface water in the upstream and midstream of Nakdong river, which is being used as tap water and industrial water supply in Daegu city and Kyungpook province, was analyzed in its water quality. In addition, the sediments of which was analyzed in terms of heavy metal and organic substance contents. All the sampling was done in the drought season for 2 days of June 22-23 and carried out in 10 sampling sites. The sites cover the whole Kyungpook provincial region, starting from Yangsam Bridge in Chyeong Ryang Provincial Park as the upper end, to the Ko Ryung Bridge as the lower end sampling site of Nakdong river that flows through Kyungpook province. The 22 items including $NH^{+}_{4}$, $NO^{-}_{2}$ and COD were analyzed for surface water and 11 items including organic constituents(trichloroethylene, etc) and heavy metals were analyzed for sediments. The sediments samples were analyzed by elution testing method and acid dissolution method and then the results were compared with each other. All heavy metals in samples were determined by Inductively Coupled Plasma-Atomic Emission Spectroscopy(ICP-AES) and other constituents were analyzed by standard testing methods of the Korean Ministry of Environment.