• The Korean Journal of Franchise Management
• /
• v.5 no.1
• /
• pp.85-108
• /
• 2014

This study provides the information about size, financial structure, profitability and growth of franchisors using financial data(asset, liability, equity, sales volume, operating income and net income) in uniform franchise offering circular of fair trade commission. The data were collected from 1,050 franchisors in various business fields: fast food, family restaurant, bakery, agriculture & fishery and liquor shop in the uniform franchise offering circular in 2012 and 2011. Results of this study are as follows: For company size, median of total assets was KRW 675 million and the accumulated median assets rate was 0.48%, but the accumulated median company numbers were 49.9%, which showed small size. For financial structure, 525 companies were below 200% debt ratio, while 314 (29.9%) companies were in over 200% debt, and 211 (20.1%) companies were impaired in capital. These also showed financial structure was vulunerable. For profitability, median of ROA for total companies were only 4.72%, which showed low profitability. For growth, median of growth rate for sales were 7.57% per year, which showed mature industry. In overall, the results showed franchisors should improve their financial status.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.450-450
• /
• 2009

최근 전세계적으로 태양전지의 대량보급에 따라 실리콘 원료의 공급에 차질이 생겨 원자재 값이 상승하는 추세에 있다. 결정질 실리콘 태양전지의 제조비용중 실리콘 재료 및 웨이퍼가 차지하는 비율은 약 50~60%정도로 높기 때문에 실리콘 웨이퍼의 두께를 감소시키는 것이 비용절감을 위한 효과적인 방법으로 기대되고 있다. 그러나 실리콘 웨이퍼의 두께가 앓아질수록 제조공정중 균열이나 파손이 발생할 가능성이 높아지기 때문에 이에 따른 실리콘 웨이퍼의 기계적 물성에 대한 연구가 필수적이라 할 수 있다. 본 연구에서는 현재 상용으로 사용되고 있는 크기가 5 인치인 $200{\mu}m$ 두께의 실리콘웨이퍼 (As-saw)를 약 80여개의 시편으로 절단한 후 각각의 파단강도를 부위별로 측정하였다. 또한 표면절단결함을 제거하는 saw damage etching(SDE) 시간을 제어하여 두께가 $150{\mu}m$, $130{\mu}m$인 웨이퍼를 준비하였다. 이들 시험편에 대해서도 부위별 파단강도를 측정하여 as-saw상태의 시험편과 비교하였다. 파단강도 측정은 4 접 굽힘시험을 통하여 측정하였으며 파단면은 주사전자현미경을 통하여 관찰하였다. 또한 실리콘 웨이퍼의 미세균열을 비파괴적으로 검출하기 위하여 100MHz 고주파수를 이용하는 초음파현미경(SAM, scanning acoustic microscope)을 이용하여 균열의 분포를 영상화하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.291.1-291.1
• /
• 2014

산화아연 박막은 아연이 코팅된 테프론 기판 위에 졸-겔 스핀코팅 방법을 이용하여 각기 다른 후열처리 온도에서 제작되었다. 산화아연 박막의 후열처리 온도에 따른 구조적, 광학적 특성은 field emission scanning electron microscopy (FE-SEM), X-ray diffractometer, and photoluminescence spectroscope를 이용하여 분석하였다. 후열처리 온도를 달리하여 성장한 모든 산화아연 박막은 수지상(dendrite) 구조를 가지고 있으며, 이 수지상 구조 위에 약 20 nm의 산화아연 입자들이 성장되었다. 후열처리 온도가 증가함에 따라 c-축 배향성이 우세하게 나타났으며, 인장응력도 증가하였다. 후열처리 온도 $400^{\circ}C$에서 Near-band-edge emission (NBE) 피크는 적색편이(red-shift) 하였고, 후열처리 온도가 증가함에 따라 deep-level emission (DLE) 피크의 세기는 감소하였다. 또한 $400^{\circ}C$의 후열처리 온도에서 NBE 피크의 반치폭(FWHM)이 가장 작았으며, INBE/IDLE의 비율이 가장 높았다. 따라서 $400^{\circ}C$의 후열처리 공정에 의해 결정성 및 광학적 특성이 가장 우수한 산화아연 박막을 얻을 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.31-40
• /
• 2004

Diff-Serv(DS) is a mechanism by which network service providers can offer differing levels of network service to different traffic, in so providing quality of service(QoS) to their customers. Because this mechanism has been deployed just for fixed hosts with the Token Bucket mechanism according to AggF(Aggregate Flow) instead of each flow, DS can not suggest effective usability of traffic resources. In this paper, we use WFQ mechanism for traffic conditioner and scheduling method monitoring the AggF and the results will be used to control the next flows coming in TC. So it will control traffic rate dynamically and suggest efficient usability of bandwidth.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.225-232
• /
• 2008

An estimation has been made for inventories and characteristics of spent nuclear fuel(SNF) to be generated from existing and planned nuclear power plants based on the 3rd Basic Plan for Electric Power Demand and Supply. The characteristics under consideration in this study are dimensions, a fuel rod array, a weight, $^{235}U$ enrichment, and the discharge burnup in terms of fuel assembly. These are essentially needed for designing a pyroprocessing facility. It is appeared that the anticipated quantity by the end of 2077 is about 23,000 tU for PWR spent nuclear fuel. It is revealed that the proportion of SNF with the initial $^{235}U$ enrichment below 4.5 weight percent(wt.%) is approximately 95 % in total. For SNF with 16$\times$16 fuel rod array the proportion is expected approximately 74% in total. It appears that the average burnup of SNF will be 55 GWd/tU after the medium and/or latter part of 2010s while the average burnup is 45 GWd/tU at present. Finally, a requirement in terms of reference SNF for designing the pyroprocessing facility has been derived from the above-mentioned results. The anticipated SNF seems to be 16$\times$16 Korean Standard Fuel Assembly with a cross section of 21.4 cm$\times$21.4 cm, a length of 453 cm, a mass of 672 kg, the initial $^{235}U$ enrichment of 4.5 wt.%, and the discharge burnup of 55 GWd/tU.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.719-725
• /
• 2005

Anaerobic fill time and feeding pattern in SBR operation were investigated to find way of minimizing poor nitrogen removal efficiency in BNR process without external carbon addition. The three types of the modified SBR operations that were CO-SBR, IA-SBR, and SF-SBR were tested by lab-scale and pilot-scale SBR processes($2\;m^3/day$). In addition, practical equation for biological nitrogen removal was suggested and the equation considered the effect of ratio of fill volume over whole SBR volume and the ratio of step-feed in SBR. The denitrification efficiency of the SF-SBR was best among the three SBRs and followed by IA-SBR, and CO-SBR. The efficiency was 95%, 61%, and 19%, respectively. Looking at the change of sludge floc density by the length of anaerobic fill time, the density of sludge floc at 1 hour and 2 hours of anaerobic fill time were greater than 3 hours of one. The floc size distributions were $100{\sim}300\;{\mu}m$ and $200{\sim}400\;{\mu}m$ with respect to anaerobic fill time 2 hours and 3 hours, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.812-821
• /
• 2008

The characteristics of cold-pressed sesame oil (CPSO), virgin sesame oil (VSO), commercial heat-press extracted sesame oil (CHPESO) and commercial supercritical fluid extracted sesame oil (CSFESO) were investigated. The total phenolics of CPSO, VSO, CHPESO and CSFESO were 31.27, 68.33, 60.65 and 31.44 mg/100 g, respectively. Their $\gamma$-tocopherol contents were 32.82, 31.66, 29.26 and 26.87 mg/100g, respectively. The sesamol, sesamin, and sesamolin contents of VSO were the highest. The oxidation induction period (4.53 hr) of CPSO was lower than that of VSO, CHPESO and CSFESO (19.90, 16.50, and 12.23 hr, respectively). CPSO was rapidly oxidized during storage at $60^{\circ}C$ in the dark, and its peroxide value (POV) was increased about 14 times. Although there were few differences in electron-donating abilities at low concentrations (below 100 mg%), VSO showed the highest electron-donating abilities at higher concentrations (77.76% at 10,000 mg%). Contents of linolenic acid and oleic acid were $40.35{\sim}43.98$ and $31.59{\sim}33.46\;g$/100 g, respectively. CPSO contained the highest amount of oleic and linoleic acid among the variously extracted sesame oil.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.624-632
• /
• 2012

As there have been lately many worldwide resource challenges such as potential exhaustion of fossil fuels, sudden rise of oil price and ever-rising grain pricing due to global food crisis, there have been more interests focused on recycling vegetable oils and fats into clean natural fuel and producing new resources based on waste cooking oil as a part of reusing waste resources. An Experiment was performed by using ratio of 50:50, 75:25 (w/w) mixture of based rapeseed oil, camellia oil, and olive oil. 50:50, 25:75 (w/w) mixture of based palm oil. The result was that the oleic acid ($C_{18:1}$) got the lowest percentage of 42.8%, when we combined the mixture of rapeseed oil and soybean oil. While the highest percentage of 72.1% was when the mixture of camellia oil and rapeseed oil were combined at 50:50 ratio. In 75:25 (w/w) case, mixture of rapeseed oil and soybean oil got the lowest. The highest ratio was the mixture of camellia oil and olive oil. Based on the component of palm oil, the total saturated fatty acid was decreased. It is expected that stabilizing oxidation through controlling of fatty acid after mixture and that liquidity at a low temperature. The acid value indicated that stabilizing oxidation got a range of highest to lowest. Camellia oil ranked as the highest, followed by olive oil, and the oil seeds as the lowest in rank. Controlling iodine value through mixture and improvement of stabilizing oxidation will provide a good quality. The quality of color has no significant change about mixture in ratio and maintenance. The reduction of the cost of refining process is expected by controling of mixture ratio at biodiesel production in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.588-597
• /
• 2016

In this study, we attempted to improve the biogas production efficiency by varying the mixing ratio of the mixed sludge of organic wastes in the improved single-phase anaerobic digestion process. The types of organic waste used in this study were raw sewage sludge, food wastewater leachate and livestock excretions. The biomethane potential was determined through the BMP test. The results showed that the biomethane potential of the livestock excretions was the highest at $1.55m^3CN4/kgVS$, and that the highest value of the composite sample, containing primary sludge, food waste leachate and livestock excretions at proportions of 50%, 30% and 20% respectively) was $0.43m^3CN4/kgVS$. On the other hand, the optimal mixture ratio of composite sludge in the demonstration plant was 68.5 (raw sludge) : 18.0 (food waste leachate) : 13.5 (livestock excretions), which was a somewhat different result from that obtained in the BMP test. This difference was attributed to the changes in the composite sludge properties and digester operating conditions, such as the retention time. The amount of biogas produced in the single-phase anaerobic digestion process was $2,514m^3/d$ with a methane content of 62.8%. Considering the value of $2,319m^3/d$ of biogas produced as its design capacity, it was considered that this process demonstrated the maximum capacity. Also, through this study, it was shown that, in the case of the anaerobic digestion process, the two-phase digestion process is better in terms of its stable tank operation and high efficiency, whereas the existing single-phase digestion process allows for the improvement of the digestion efficiency and performance.