반도체 제조공정에서 패터닝 공정과 박막형성 공정은 매우 중요한 위치를 차지하고 있다. 본 논문의 목적은 위 두가지의 공정을 최적화하기 위한 품질공학적 접근방법을 소개하는데 있다. 특히, 패터닝 공정의 전사성과 박막현상 공정의 두께의 균일성에 관한 문제를 동특성의 문제로 정형화하고 신호인자를 어떻게 설정할 것인가에 관해 논의하였다.
기체 막분리공정 기술이 점점 개발되어질수록 막분리의 성능을 이해하려는 필요성이 각 공정에서 증진될 것이며 기체 막분리 성능의 예측능 기술 발전을 위해 계속 시도되어질 것이다. 이러한 추세에 힘입어 현재 석유화학공정 배가스 중 수소를 정제하기 위한 기술 개발을 시도하고 있으며 특히 저농도의 수소를 고농도로 농축시키기 위해 막분리 공정을 적극 검토하고 있다. 본 논문에서 밝혀 본 막분리 공정의 성능 예측과 분석은 향후 공정을 설계하고 제작하는 데 크게 이바지할 뿐만 아니라 석유화학 제반 공정뿐만 아니라 관련 화학공업장치 산업에서 기체 분리를 통한 자원회수와 에너지 절약 측면에서 계속 발전해 나갈 것은 믿어 의심치 않을 것이다.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.155-155
/
2004
최근 집중 육성산업으로 분류되어 연구 및 투자가 되고 있는 반도체, 정보통신, 바이오산업, 디스플레이 등에서 초정밀화와 저비용, 대량생산을 하기 위해서 기존의 공정을 대체할 수 있는 새로운 나노공정기술의 요구가 급증하고 있다 최근에는 극초단파 특성으로 인하여 극미세 형상을 가공할 수 있는 펨토초 레이저(femto second laser)를 나노공정에 적용하는 다양한 연구가 진행되고 있다. 특히, 기존의 쾌속조형공정을 응용하여 다른 공정으로는 제작이 불가능한 나노 스케일에서 3차원 자유곡면을 가지는 구조물을 제작할 수 있는 공정개발에 대하여 다양한 연구가 진행되고 있다.(중략)
Proceedings of the Korean Nuclear Society Conference
/
1995.05a
/
pp.824-828
/
1995
월성원전에서 삼중수소에 의한 작업자 피폭 및 환경방출량을 가능한 한 낮게 유지하기 위해서는 계통중수중에 축적되는 삼중수소를 근원적으로 제거할 수 있는 삼중수소제거시설이 필수적이다. 삼중수소제거공정은 방사선 안전성과 에너지 효율 측면에서 액상촉매교환과 초저온증류공정의 복합공정이 가장 효과적인 것으로 알려지고 있다. 본 연구에서는 월성원전의 후속기를 고려하여 용량이 연간 8MCi의 삼중수소제거시설에 대한 최적설계를 수행하였다. 액상촉매교환공정에 대해서는 NTU-HTU법 그리고 초전온증류공정에는 Fenske-Underwood-Gilliland법을 이용하여 공정을 해석하였고 공정내 삼중소소의 재고량이 최소가 되는 최적의 설계변수들을 제시하였다.
본 협회는 지난 2월 23일(화) 대한상공회의소 2$\cdot$3 회의실에서 공정거래위원회 김병일 정책국장을 초빙하여 $\lceil$공정거래법 주요 개정내용$\rfloor$에 대한 설명회를 개최하였다. 1999년도 회원정기총회에 이어 개최된 동 공정거래법 설명회에서는 김병일 국장이 지난 12월에 개정된 공정거래법의 주요 개정내용 및 동법 시행령의 개정방향과 ''99년도 공정거래위원회의 주요 업무계획에 대해 설명하였다.
복합재료는 원자재의 특성에 따라 성형 공정이 각각 다르다. 생산단가 절감을 위하여 최적 공정 및 자동화가 가장 큰 관심의 대상이므로 공정의 모델링과 이에 의거해 컴퓨터를 이용한 수치해 석들이 많이 이루어지고 있으며 이 결과를 제조 공정의 최적화에 이용할 경우 비용이 많이 들고 시간이 오래 걸리는 실험에 의한 방법을 많이 대치할 수 이어 새로운 기지재료가 소개되었을 경우, 제조 공정의 결정에 있어 시간과 비용을 대폭 절감시킬 수 잇다. 앞으로 소재의 기능화, 경량화 추세에 힘입어 복합재료의 수요는 계속 늘어날 전망이어서 환경문제에 대한 관심도 소 홀히 할 수 없으며, 기존의 재료 성형 공정과는 비교적 색다른 성형 공정의 개발에도 관심을 가져야 할 것이다.
Kim, Hee-Young;Lee, Eui-Soo;Kim, Won-Seok;Suh, Dong-Jin;Ahn, Byoung-Sung
Clean Technology
/
v.17
no.2
/
pp.156-165
/
2011
The process for bioethanol production from lignocellulosic biomass was studied through process simulation using PRO/II. Process integration was conducted with concentrated acid pretreatment, hydrolysis process, SMB (simulated moving bed chromatography) process and pervaporation process. Energy consumption could be minimized by the heat recovery process. In addition, material and energy balance were calculated based on the results from the simulation and literature data. A net production yield of 4.07 kg-biomass and energy consumption value of 3,572 kcal per 1 kg ethanol were calculated, which is indicating that 26% yield increase and 30% energy saving compared to the bioethanol production process with dilute-acid hydrolysis (SRI report). In order to make it possible, sugar conversion yield of cellulose and hemi-cellulose is to be reached up to 90% and fermentation of xylose needs to be developed. In order to reduce the energy consumption up to 30%, the concentration of acid solution after being separated by 5MB should exceed 20%. If acid/sugar separation by SMB process is to be practical, the bioethanol process designed in this study can be commercially feasible.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.2
/
pp.141-151
/
2013
Process planning can be defined as determining detailed methods by which parts can be manufactured from the initial to the finished stage. Process planning starts with determining the manufacturing process based on the geometric shape of the part and the machines and tools required for performing this process. Distributed process planning enables production planning to be performed easily by combining the extracted process and various manufacturing resources such as operations and tools. This study proposes an algorithm to determine the process for a feature-based model and to combine manufacturing resources for the process and implements a distributed process planning system.
수소에너지는 다양한 원료로부터의 수소생산을 위한 반응기술 및 생산물로부터 수소 정제를 위한 분리기술의 확립과 더불어, 대형화 시스템부터 소형 시스템에 이르는 공정기술을 확보하는 것이 다가오는 청정 대체에너지 체제에 대비하기 위하여 필요하다. 이를 위해서는 생산된 수소 혼합물에서부터 수소를 분리 정제하는pressure swing adsorption (PSA) 의 개발이 필수적이다. 이 기술은 이미 다양한 분야에 성공적으로 상용화 적용되어 기술의 타당성을 제시하고 있으나, 국내의 경우 수입에 의존하고 있어 이를 설계 할 수 있는 공정모사기 (simulator)의 개발이 우선되어야 한다. 따라서 효율적으로 PSA 공정 및 scale-up기술을 확보하기 위해서는 전산모사기 개발의 선행이 필수적이다. PSA 공정의 전산모사기는 물질수지, 에너지수지, 모멘텀수지와 더불어 흡착평형과 속도식이 결합되어 개발되어야 한다. 특히 공정에 다양한 단계가 적용되기 때문에 복잡한 boundary condition이 적용되며, 연속순환공정이라 하더라도 각 단계가 discrete 하게 해석되어야 한다. 따라서 공정모사는dynamic simulator로 개발되어야 정확도를 확보할 수 있다. 본 연구에서는 제철소에서 발생하는 수소혼합물이 WGSR 반응기를 거쳐 수소의 농도를 향상 시키고, 이를 유입가스로 사용하는 $H_2$ PSA 공정 모사기를 개발하고자 한다. 수소 생산을 위한 PSA 공정 모사기 개발을 통하여 95% $H_2$ 순도와 90% 회수율 규모의 수소를 생산할 수 있는 PSA 공정의 설계 기술기반을 확보하고자 한다.
This paper considers the integrated process control procedure for detecting special causes in an ARIMA(0,1,1) process that is being adjusted automatically after each observation using a minimum mean squared error adjustment policy. It is assumed that a special cause can change the process mean and the process variance. We derive expressions for the process deviation from target for a variety of different process parameter changes, and introduce a control chart, based on the generalized likelihood ratio, for detecting special causes. We also propose the integrated process control scheme bases on the future loss. The future loss denotes the cost that will be incurred in a process remaining interval from a true out-of-control signal.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.