• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.52-57
• /
• 1996

Conductive Ceramic Matrix Composite(CMC) of TIC/Al2O3 and Metal Matrix Composite (MMC) of SiC/Al were experienced by the die sinking Electrical Discharge Machining(EDM) for different current and duty factor according to negative polarity. Inthis experimental study Material Removal Rate(MRR) maximum surface roughness four point bending stress distribution and Scanning Electron Microscopy(SEM) Photographs were analysed. the higher MRR was obtained for CMC than MMC but slowly decreased around duty factor of 0.67 for MMC and better surface morphology was found CMC than MMC. The SEM photographs of discharge traces for CMC showe uniform shape about 100 to 200${\mu}{\textrm}{m}$ in diameter but MMC showed irregular shape.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.3-7
• /
• 1996

Metal Matrix Composite(MMC) material of 30% SiC particulate based on A1 matrix was machined by drilling and Electrical Discharge Machining (EDM) processes. When drilling process was executed, surface fracture due to brittle property near the bottom was found. It was also found the possiblity of difficult shape of EDM process for MMC material, but few the research about basic EDM characteristics. Material Removal Rate(MRR) was examined for different conditions and the surface morphology was evaluated by roughness values and Scanning Electron Microscopy(SEM) research. The higher the current is, the more MRR was obtained but the higher MRR was showed around 0.45 duty factor. The average roughness of EDMed surface was slightly changed with increased pulse current and increases with duty factor. The SEM photographs of EDMed surface showed recast region after melting.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.46-50
• /
• 1996

Die sinking Electrical Discharge Machining(EDM) of TiC/Al$_2$O$_3$Ceramic Matrix Composite(CMC) was conducted for positive and negative polarity according to the change of current and Duty Factor(DF). Also FEM analysis about temperature distribution of workpiece by one spark was executed. Maximum surface roughness( R$_{max}$ ) and SEM photographs of the EDMed surface for different conditions were evaluated. Higher Material Removal Rate(MRR) was obtained for negative polarity than positive one. Better surface morphology was found as the current is decreased, but the MRR was also decreased. From the SEM photographs, the size of melt cavity due to one spark is about 100 to 150${\mu}{\textrm}{m}$ in diameterer

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.158-168
• /
• 1995

연삭숫돌 선택은 공작물제거량, 숫돌의 소모량, 표면정도 및 공작물의 물리적,화학적 특성을 고려하여 설정하는 것을 기본으로 한다. 연삭가공은 구성인자의 상호관계가 복잡하여 이중에서 어느한 요소만을 고려하여 설정하기 어렵고 정량적 기준 또한 정해져있지 않아 현실적으로는 숙련자의 정성적이고 경험적 지식에 따른 주관적 척도에 의존하는 것이 대부분이다. 또한, 연삭숫돌은 작업조건중에서 대량생산을 제외하고는 되도록이면 현장에 구비되어 있는 작업가능한 연삭숫돌 중에서 선택하는 것이 바람직하다. 따라서 본시스템에서는 이와같은 점을 고려하여 최적 연삭숫돌선택을 퍼지이론에 기초한 현장 숙련자의 지식을 활용하므로써 연삭숫돌선택의 효율성을 도모하는 동시에 현장에 연삭숫돌이 구비되지 않은 경우도 고려하여 연삭숫돌설정에 우선순위를 제시하므로써 작업자에 연삭숫돌선택의 유연성을 부여하였다. 또한, 실용성있는 전문가시스템의 구축을 위해 정성적이고 경험적인 지식의 활용을 위한 지식표현으로 설문조사에서 얻은 테이타를 x$^{2}$-분포에 따른 추정신뢰구간을 구해, 이를 토대로한 비대칭 삼각퍼지함수의 결정법을 제시하고, 이를 이용해서 구축한 시스템의 실행결과의 타당성을 비교하고자 한다.